Data Logger selection for recording of electrical, hvac and industrial data from a variety of common sensors. Recorders enable data aquisition for future analysis.
Introducing New Dent Instruments 4G SMART loggers Current Data Loggers: CTlogger, LIGHTINGlogger, MAGlogger, and CONTACTlogger. Now store more than 32,000 records! The fourth generation SMARTloggers are the easy way to monitor, present and analyze energy consumption data for a variety of electrical equipment. All Dent Instruments testers are made in the USA.
AEMC AL834 AC Current Logger 4 Channel is a 4-channel AC current data logger with four integral flexible current sensors. Each sensor is 24 inches long and capable of wrapping around an 8 inch conductor.
AEMC CL601 Clamp-On AC Logger is a battery powered, one channel recording device with an alkaline battery pack. This clamp-on AC logger records TRMS at a rate of up to eight times per second.
AEMC L101 AC Current Logger is a one channel recording device powered by an alkaline battery pack. This AC current logger is able to perform a variety of recording tasks with easy and intuitive setup from a computer using DataView® software.
AEMC L102 AC Current Data Logger is a two channel recording device. This thermocouple logger is able to perform a variety of recording tasks with easy and intuitive setup from a computer using DataView® software.
AEMC L111 AC Current Logger is a one channel recording device powered by an alkaline battery pack. This AC current logger is able to perform a variety of recording tasks with easy and intuitive setup from a computer using DataView® software.
AEMC L215 AC Voltage Logger is the ideal product to capture short-term events such as sags and swells. This AC voltage logger samples the input 10 times per second and only stores the data when an alarm threshold is crossed, thus maximizing its use of memory.
AEMC L261 AC Voltage Logger is a one channel recording device powered by an alkaline battery pack. This AC voltage logger is able to perform a variety of recording tasks with easy and intuitive setup from a computer using DataView® software.
AEMC L322 4 to 20mA Logger is a two channel 4-20mADC current data logger. This thermocouple logger is able to perform a variety of recording tasks with easy and intuitive setup from a computer using DataView® software.
AEMC L404 Simple Logger II is a four channel event data logger. Event data is stored only as the event occurs. Works with dry contact closure or 0-3 and 0-5V DC logic levels. Internal memory allows storing over 50,000 events. User-programmable event measurement scaling.
AEMC L432 DC Voltage Logger is a two channel DC data logger. This thermocouple logger is able to perform a variety of recording tasks with easy and intuitive setup from a computer using DataView® software.
AEMC L481 DC Voltage Logger - Simple Logger II is a bipolar 850VDC data logger. Internal
memory allows storing over 240,000
measurements. User programmable scale and engineering units. Battery operation and compact size.
AEMC L562 Volt and Amp Logger is a two channel Volt/Amp data logger. This thermocouple logger is able to perform a variety of recording tasks with easy and intuitive setup from a computer using DataView® software.
AEMC L642 Thermocouple Logger is a two channel thermocouple data logger. This thermocouple logger is able to perform a variety of recording tasks with easy and intuitive setup from a computer using DataView® software.
AEMC ML912 AC Current Logger is a two channel AC current recording device powered by two alkaline batteries. This AC current logger incorporates two user selectable measurement ranges of 0 to 100 Amps and 0 to 1000 Amps.
AEMC ML914 AC Current Logger 4 Channel is a 4-channel AC current recording device powered by alkaline batteries and includes four integral 6inch MiniFlex flexible current probes.
Dent Instruments 4G CONTACTlogger Pulse Data Logger (Smart Logger) is designed to monitor the on-off status, time-of-use operating schedule, and total on-time for energy consuming devices and systems. Made in the USA.
Dent Instruments 4G CTlogger Current Data Smart Logger is designed to monitor the on-off status, time-of-use operating schedule, and total on-time for energy consuming devices and systems. Made in the USA.
Dent Instruments 4G LIGHTINGlogger Light Data Logger Smart Logger is designed to monitor the on-off status, time-of-use operating schedule, and total on-time for energy consuming devices and systems. The non-contact monitoring makes installation simple. Each of these small, robust instruments provide powerful data for superior energy management. Made in the USA.
These new entry-level borescope video inspection systems are affordable and contain high resolution cameras that send video to a PC or other display system. more info click here
