Ground resistance tester called earth resistance tester does ground resistance testing of soil resistivity. Soil resistivity meter from Amprobe, AEMC and Extech measures earth ground resistance. AEMC clamp ground resistance tester measures ground rod and small grid earth resistance through any season. Amprobe DGC-1000 performs earth fault resistance testing. Extech ground clamp performs non-contact measurements of ground conductors and earth resistance without need for auxiliary ground spikes.
AEMC 3620 3-Point Ground Resistance Tester performs ground resistance measurement from 0.5 to 1000Ω with speed and accuracy. It features three-terminal operation for fall-of-potential earth-ground resistance testing, and may also be used for 2-Point test.
AEMC 3620-150 3-Point Ground Resistance Tester is also available in complete kit form, which includes the meter to measure earth resistance, 16 ft lead, two 150 ft leads on spools, two wind-up handles, two auxiliary ground electrodes and soft carrying bag.
AEMC 3620-300 3-Point Ground Resistance Tester is also available in complete kit form, which includes the meter to measure earth resistance, two 300 ft color-coded leads on spools, two 100 ft color-coded, four 14.5" T-shaped auxiliary ground electrodes, one set of five spaded lugs, 100 ft tape measurer and carrying bag.
AEMC 3620-500 3-Point Ground Resistance Tester is a complete kit, which includes the meter to measure earth resistance, two 500 ft color-coded leads on spools, two 100 ft color-coded leads, one 30 ft lead, four 14.5" T-shaped auxiliary ground electrodes, one set of five spaded lugs, 100 ft tape measurer and carrying bag.
AEMC 3640 3-Point Ground Resistance Tester also called earth resistance tester performs ground resistance measurement. This direct reading tester measures from 10MΩ to 1999Ω, and is auto-ranging, so it automatically seeks out the optimum measurement range.
AEMC Digital Ground Resistance Tester Model 3640 is easy to use - simply connect the leads, press to measure, and read. The large LCD (nearly 3/4" high) also indicates low battery status, overrange, and lead reversals.
AEMC Digital Ground Resistance Tester Model 3640 comes with 3 color coded terminals to aid in easy hookup. Three LED indicators on the front panel continuously warn the user of measurement problems to ensure accurate and reliable tests.
AEMC Digital Ground Earth Resistance Tester Model 3640 performs ground resistance testing. This direct reading meter measures earth resistance and or soil resistivity from 10MΩ to 1999Ω, and is auto-ranging, so it automatically seeks out the optimum measurement range. When testing ground or earth resistance - simply connect the leads, press to measure, and read. The large LCD (nearly 3/4" high) also indicates low battery status, overrange, and lead reversals.
AEMC 3640-150 3-Point Ground Resistance Tester is available alone or as a complete kit. The kit includes the meter to measure earth resistance, two 150 ft color-coded leads on spools (red and blue), one 30 ft lead (green), two 14.5" T-shaped auxiliary ground electrodes, one set of five spaded lugs, 100 ft tape measurer and carrying bag.
AEMC 3640-300 3-Point Ground Resistance Tester is available alone or as a complete kit. The kit includes the meter to measure earth resistance, two 300 ft color-coded leads on spools, two 100 ft color-coded, four 14.5" T-shaped auxiliary ground electrodes, one set of five spaded lugs, 100 ft tape measurer and carrying bag.
AEMC 3640-500 3-Point Ground Resistance Tester is available alone or as a complete kit. The kit includes the meter to measure earth resistance, two 500 ft color-coded leads on spools, two 100 ft color-coded leads, one 30 ft lead, four 14.5" T-shaped auxiliary ground electrodes, one set of five spaded lugs, 100 ft tape measurer and carrying bag.
AEMC 3711 Clamp-On Ground Resistance Tester measures ground rod and small grid earth resistance through any season. Testing of earth resistance of soil resistivity is done without the use of auxiliary ground rods.
AEMC 3731 Clamp-On Ground Resistance Tester measures ground rod and small grid earth resistance through any season. Testing of earth resistance of soil resistivity is done without the use of auxiliary ground rods.
AEMC 4620 4-Point Ground Earth Resistance Tester performs ground resistance and soil resistivity testing. This direct reading testers meter measures earth resistance from 0 to 2000Ω, and is auto-ranging, so it automatically seeks outs the optimum measurement range for each test.
AEMC 4620-300 4-Point Ground Earth Resistance Tester is also available in complete kit form 4620-300, which includes the meter to measure earth resistance, two 300 ft color-coded leads on spools, two 100 ft color-coded, four 14.5" T-shaped auxiliary ground electrodes, one set of five spaded lugs, 100 ft tape measurer and carrying bag.
AEMC 4620-500 4-Point Ground Earth Resistance Tester is also available in complete kit form 4620-500, which includes the meter to measure earth resistance, two 500 ft color-coded leads on spools, two 100 ft color-coded leads, one 30 ft lead, four 14.5" T-shaped auxiliary ground electrodes, one set of five spaded lugs, 100 ft tape measurer and carrying bag.
AEMC 4630 4-Point Ground Earth Resistance Tester performs ground resistance and soil resistivity testing. This direct reading meter measures earth resistance from 0 to 2000Ω, and is auto-ranging, so it automatically seeks outs the optimum measurement range.
AEMC 4630-150 4-Point Ground Earth Resistance Tester is a complete kit, which includes the meter to measure earth resistance, two 150 ft color-coded leads on spools (red and blue), one 30 ft lead (green), two 14.5" T-shaped auxiliary ground electrodes, one set of five spaded lugs, 100 ft tape measurer and carrying bag.
AEMC 4630-300 4-Point Ground Earth Resistance Tester is a complete kit, which includes the meter to measure earth resistance, two 300 ft color-coded leads on spools, two 100 ft color-coded, four 14.5" T-shaped auxiliary ground electrodes, one set of five spaded lugs, 100 ft tape measurer and carrying bag.
AEMC 4630-500 4-Point Ground Earth Resistance Tester is a complete kit, which includes the meter to measure earth resistance, two 500 ft color-coded leads on spools, two 100 ft color-coded leads, one 30 ft lead, four 14.5" T-shaped auxiliary ground electrodes, one set of five spaded lugs, 100 ft tape measurer and carrying bag.
AEMC 565 Leakage Current Clamp Meter and Probe - TRMS Leakage Current Meter (TRMS, 60mA, 600mA, 100A, 600VAC/DC, Hz, Ohms, Continuity).
This TRMS Clamp-On Leakage Current Meter is designed to measure low AC currents, which are typically leakage currents in ground conductors.
AEMC 565 is ergonomic in design and fits well in the hand, facilitating one hand operation. The jaw size is compact yet designed to accommodate the most common conductors up to 1" (26mm) in diameter.
These new entry-level borescope video inspection systems are affordable and contain high resolution cameras that send video to a PC or other display system. more info click here
