| Description of Tempo 620K Tone and Probe Kit: |
Tempo 620K tone and probe kit is designed specifically for the security and alarm industry.
Tempo PE620 can be connected to a Normally Open or Normally Closed loop pair and provides a distinct audible tone when the alarm condition occurs.
To better satisfy industry requirements, we’ve combined the new model PE620 Loop Verifier with the popular model 200EP Inductive Amplifier in this convenient kit.
Both units fit comfortably in the rugged 700C Carrying Case made of durable woven polyester.
|
| Characteristics of Tempo 620K Tone and Probe Kit: |
| |
The non-latching feature provides a simple method for identifying intermit-
tent failures (“swingers”) and confirming operation of switches at remote locations.
|
| |
In the latching mode, the unit will catch the alarm condition and continue sounding until the tester is reset.
|
| |
As a tone generator, the unit provides a traditional variable tone that can be applied using the 24" red and black test leads or a convenient 6-position modular plug.
|
| |
Convenient magnetic back plate allows the PE620 to be mounted directly to the control panel cabinet or door.
|
| Warranty: |
1-year warranty.
|
| |
Battery operated (9V not included) and can be used on any wiring.
|
| |
Provides tone signaling, continuity testing and telephone line polarity indication combined with a modular breakout adapter.
|
| |
Selectable tone outputs for identifying multiple cable runs.
|
| |
Includes multiple connection options.
|
| |
CE version available.
|
| Specifications of Tempo 620K Tone and Probe Kit: |
| Specifications of PE620 Alarm Loop Verifier: |
|
| Electrical power: |
One 9V battery
|
| Battery life (nominal): |
100+ hours tone, 15+ hours audible signal
|
| Tone frequency: |
900/1100 Hz alternating, nominal
|
| Tone output: |
+3 dBm into 600ohms
|
| Continuity: |
N.O. on <50k ohms, off>80k ohms; N.C. on >120kohms, off<80k ohms
|
| Latch sensitivity: |
Any occurrence > 100 microseconds
|
| Case: |
High-impact ABS case
|
| Weight: |
5.5 oz w/battery
|
| Specifications of 200EP Inductive Amplifier |
|
| Power: |
One 9V battery, nominal life 50 hrs
|
| Probe tip resistance: |
Metal 0 ohms, plastic 300 ohms minimum
|
| Input impedance: |
100M ohms
|
| Gain: |
26 dB
|
| Size: |
1.125 x 2.125 x 9", 5.5 oz with battery
|
| Datasheet: |
|
Need Technical Advise? Please Call: 602-795-8292
Browse Similar Products |
