Amprobe DM-III Multitest Power Quality Recorder Analyzer Data Logger

ModelDM-III-Multitest MFG Part2731242
Availability In Stock

Amprobe DM-III Multitest Power Quality Recorder Analyzer Data Logger

More Views

Quick Overview

Amprobe DM-III Multitest Power Quality Recorder Analyzer and Data Logger comes as a complete kit, CT and PC software are included with product.
Amprobe DM III Multitest works with single and three phase systems (Y and Delta) and measures voltage anomalies such as Sags and Surges, power system harmonics and power factor.
Characteristics
Characteristics: Amprobe DM-III Multitest Power Quality Recorder Analyzer Data Logger
  True RMS (TRMS)
  Compatible with wide range of Current Transducers
  Measures and Records Broad Spectrum of Power Quality Parameters: AC Current, AC Voltage to 600V including Sags and Surges, Harmonics (THD and individual up to 49th), Active, Reactive and Apparent Power & Energy, Peak Demand, Power Factor, Frequency measur
  Comes as a complete kit: CTs, Voltage Leads, Ground Probes & Leads, PC software and download cable are included with this product.
  Works with single and three phase systems (Y and Delta)
  Detects and records voltage anomalies, Sags and Surges
  Built in scope displays waveforms
  Phase sequence indication
  Records up to 64 parameters (single or three phase) simultaneously
  Manual and programmable recording start
  Password protection
  Selectable fundamental frequency of 50 or 60 Hz
  Special data compression system and user selectable rates allow recording from several hours to several years
  Download capabilities, Windows compatible PC software
  Displacement power factor for power factor correction determination
  Line or battery powered
  Megohmmeter functions: Tests insulation of wires, cables, transformers and electrical motors
  Selectable test voltages up to 1000V
  Programmable timer to perform the Dielectric Absorption Ratio Test
  Sensitive Ohmmeter for checking resistance of motor windings
  Selectable polarization of ohmmeter for checking grounding continuity
  Automatic voltmeter protects against misuse on hazardous energized systems
Description
Amprobe DM-III Multitest Power Quality Data Logger and Analyzer is a complete kit. Amprobe DM-III Multitest Power Quality Data Logger and Analyzer is a portable power quality meter, monitor and recorder that works with single and three phase systems (Y and Delta) and will measure voltage anomalies including sags and surges, power system harmonics and power factor. Megohmmeter functions: Selectable test voltages up to 1000V. Ground Resistance and Resistivity functions: Three measuring modes Amprobe's full-featured Three-Phase Power Quality Recorders provide the essential functions and capabilities required to operate accurately and effectively in today's demanding electrical environments. CT and PC software included with product.
Specifications
Specifications: Amprobe DM-III Multitest Power Quality Recorder Analyzer Data Logger
Supplied Current Transducer: DM-CT-DMA 1000A Standard CT 2 internal diameter CT +/-(0.5% Rdg + 2 LSD
AC Current : DM-CT-100:0.5A to 100A / DM-CT-HTA:5 - 1000A /AM-FLEX33: Selectable: 5 to 1000A or 15 - 3000A +/-(0.5% Rdg + 2 LSD)
AC Voltage including Sags and Surges: 0 - 600V +/-(0.5% Rdg + 2 LSD
Harmonics: THD, DC and individual up to 49th +/-(0.5% Rdg + 2 LSD)
Power: Working (W), Reactive (VAR) and Apparent (VA) +/-(1.0% Rdg + 2 LSD
Energy: Working (kWh), Reactive (VARh) and Apparent (VAh) +/-(1.0% Rdg + 2 LSD)
Peak Demand: KW +/-(1.0% Rdg + 2 LSD)
Power Factor: 0.00 – 1.00
Frequency measurement: 57 to 63.6 Hz at 60Hz fundamental 47 to 53 Hz at 50Hz fundamental +/-(1.0% Rdg + 2 LSD
Phase sequence: 1 - 2 - 3
Co-generation: Computes incoming and outgoing energy
Selectable Fundamental Frequencies: 50/60 Hz
Available Recording Time: Several hours to several years depending on setup
Insulation resistance with 50 VDC test voltage: 0.01-19.99, 49.9 +/- (2% Reading + 2 digits) 49.9 - 99.9MΩ +/- (5% Reading + 2 digits)
Insulation resistance with 100 VDC test voltage: 0.01-19.99, 99.9 +/- (2% Reading + 2 digits) 99.9 - 199.9MΩ +/- (5% Reading + 2 digits)
Insulation resistance with 250 VDC test voltage: 0.01-19.99, 199.9, 249 +/- (2% Reading + 2 digits) 249 - 499MΩ +/- (5% Reading + 2 digits)
Insulation resistance with 500 VDC test voltage: 0.01-19.99, 199.9, 499 +/- (2% Reading + 2 digits) 499 - 999 MΩ +/- (5% Reading + 2 digits)
Insulation resistance with 1000 VDC test voltage: 0.01-19.99, 199.9, 999 +/- (2% Reading + 2 digits) 999 - 1999 MΩ +/- (5% Reading + 2 digits)
Low resistance (without timer): 0.01-19.99, 99.9Ω+/- (2% Reading + 2 digits)
Low resistance (with timer): 0.01-9.9Ω+/- (2% Reading + 2 digits)
Ground resistance: 0-19.99, 199.9, 1999 Ω +/- (5% Reading + 3 digits)
Ground resistivity: 0.6- 125.6 Ωm 0.125-1.256, 19.99, 199.9 kΩm +/- (5% Reading + 3 digits)
Applications
Accessories
Specs and Videos

Technical Specs for Amprobe DM-III Multitest Power Quality Recorder Analyzer Data Logger:

View FileDM-III-MULTITEST    Size: (660.69 KB) DM-III-MULTITEST

Customer Reviews

This product usability is great Review by chacoo
Value
Quality
Price

I advise everyone to use this instrument when it comes to power quality measurements..

(Posted on 10/10/2012)