Byte Brothers TVR10/100/1000K LAN Cable Tester and Link Verifier

ModelTVR10-100-1000 MFG PartTVR10-100-1000
Availability In Stock

Write a Review

Price:
$194.97
Save:
$37.04
Special Price:
$157.93

Byte Brothers TVR10/100/1000K LAN Cable Tester and Link Verifier

More Views

Quick Overview

Byte Brothers TVR10/100/1000K LAN Network Tester has been designed to test, verify and repair 10, 100 and 1000 Base-T Networks! The latest model of lan tester supports all network speeds plus displays full and half duplex. Go Inline between two LAN devices and see if the negotiated speed and duplex is what you expect. Made in the USA.
Characteristics
Characteristics: Byte Brothers TVR10/100/1000K LAN Network Tester
  Inline monitors LAN link to determine negotiated speed (between two devices)
  Finds speed bottlenecks on 10, 100 and 1000 Base-T LANs
  Checks if straight thru or crossover patch cable is required
  Verifies hub/switch to hub/switch data transmission
  Goes inline between two devices to verify the negotiated speed and duplex of the link. This powerful feature is is found on testers that cost $1500 or more
  Verifies if hub/switch is ON, if it appears as a hub/switch and speed capabilities and duplex
LAN Network Tests: Verifies if PC is ON, if it appears as a PC and speed capabilities and duplex
Benefits  
  Hub/PC verifier that indicates the equipment Device Type (is it a hub/switch or PC)
  LAN speedometer that verifies the speed and duplex of the link (10,100 or 1000MB/s, full or half duplex)
  Straight thru/crossover cable jacks indicates the patch cable required
  Inline network activity monitor indicates the negotiated speed and duplex between two LAN devices. A quick way to spot network bottlenecks
  Tone probe and tone generator for tracing cable locations (and the port used)
  Cable pairs tester that verifies what cable pairs are wired and identifies straight thru and crossover configurations
  Cable termination tester: Tests for the existence of a LAN device connected at the end of the cable (determines number of cable pairs required by the device)
Description

Byte Brothers TVR10/100/1000K LAN Network Tester is comprised of two units: The "Main unit" and the "Remote Probe." The Main unit performs the bulk of the tests such as determining the LAN device type (is it a hub/switch or PC) and the LAN speed and duplex (10, 100, 1000 MB/s, half or full duplex) without the need of the Remote Probe. The Remote Probe adds the ability to trace cable locations (by audibly tracing tones cables with all four pairs to insure compatibility with all three types of Base-T LANs.

Broad capabilities: TVR10/100/1000K helps you locate faulty hubs, PCs or cable connections that are stopping or limiting the performance of your 10, 100 and 1000 Base-T LAN. You can even go inline between two LAN devices and determine the final negotiated speed and duplex of the link! Designed for both the LAN installer and repair person, it is useful documenting legacy LANs, installing and repairing LANs or adding equipment to existing LANs.

Designed specifically for 10, 100 and 1000 Base-T LANs: The TVR10/100/1000K has been designed to test LAN devices and cabling designed to the 10, 100 and 1000 Base-T standard. This includes wiring paired to EIA(TIA)568B (also called AT&T258A or simply "AT&T"); and EIA(TIA)568A. EIA(TIA)568B is the most popular scheme for 10, 100 and 1000 Base-T cabling. EIA(TIA)568A is the most popular scheme for ISDN cabling. USOC pairing (typically used for telephones) is not compatible with the Base-T standard and is therefore not tested by the TVR10/100/1000K.

Multiple test sets in one tester: To accomplish its goals, the TVR10/100/1000K performs tests that, prior to the TVR10/100/1000K, required 7 different test sets. Plus, the multi-functionality is integrated to provide a combination of quick results that are not available in any other tester. Made in the USA.

Specifications
Applications
Accessories
Specs and Videos