Amprobe 37XR-A TRMS Digital Multimeter for Electronics Troubleshooting

Model37XR-A MFG Part2727808
Availability In Stock
Price:
$179.95
Save:
$42.34
Special Price:
$137.61

Amprobe 37XR-A TRMS Digital Multimeter for Electronics Troubleshooting

More Views

Quick Overview

Amprobe 37XR-A Digital Multimeter is a True RMS meter for electronics troubleshooting at the bench or job site. The highest accuracy meter in the XR series.
Characteristics
Chracteristics:Amprobe 37XR-A TRMS Digital Multimeter for Electronics Troubleshooting
 Inductance to 40 Hertz, frequency to 40 Megahertz, capacitance to 400 μF, and logic to 20 Megahertz
 Warning tones
 10,000 count display with 0.1 % accuracy
 1000 Volt/750 Volt dc/ac currents
 Safety fused for up to 10 Amps ac/dc current
 Resistance to 40 mA loop
 Stability beeper
 Min/max, average, relative, peak, and data hold capabilities
 Auto-off
 Separate access door for fuse and battery
 Magnetic holster that has a hanging strap included
 CAT III 600 Volt, CAT II 1000 Volt rated
 UL (CULUS) registered
 Included 3 year warranty
Description
Amprobe 37XR-A Digital Multimeter is a multimeter that can be used for troubleshooting electronics. This tool is portable, so it can be used at the bench or job site. The 37XR-A is the most precise meter in the XR series.
Specifications
Specifications: Amprobe 37XR-A Digital Multimeter
DC Voltage 1000 mV, 10 V, 100 V, 1000 V +/-(0.1 % rdg + 5 dgt)
AAC Voltage True RMS (45 Hz to 2 kHz) Voltage 1000 mV, 10 V, 100 V (45 Hz to 500 Hz) +/-(1.2 % rdg + 10 dgts) 1000 mV, 10 V, 100 V (500 Hz to 2 kHz) +/-(2.0 % rdg + 10 dgts) 750 V (45 Hz to 1 kHz) +/-(2.0 % rdg + 10 dgts)
AC coupled True RMS specified from 5 % to 100 % of range
Input Impedance 10 MW
Voltage Resolution 100 μV
DC Current 100 μA +/-(0.5 % rdg + 10 dgt) 1000 μA, 10 mA, 100 mA, 400 mA +/-(0.5 % rdg + 5 dgts) 10 A +/-(1.5 % rdg + 10 dgt)
AC Current True RMS (45 Hz to 1 kHz) 100μA, 1000 μA, 10 mA, 100 mA +/-(1.5 % rdg + 10 dgts) 400 mA +/-(2.0 % rdg + 10 dgts) 10 A +/-(2.5 % rdg + 10 dgts)
Current Resolution 0.01 μA
Resistance 1000 W, 10 kW, 100 kW, 1000 kW +/-(0.5 % rdg + 8 dgts) 10 MW +/-(1.0 % rdg + 10 dgts) 40 MW +/-(2.0 % rdg + 10 dgts)
Resistance Resolution 100 mW
Capacitance 40 nF, 400 μF +/-(3.0 % rdg + 10 dgts) 400 nF, 4 μF, 40 μF +/-(3.0 % rdg + 5 dgts)
Capacitance Resolution 0.01 nF
Inductance (for values of Q ² 7) 4 mH, 40 mH, 400 mH, 4 H, 40 H +/-(5.0 % rdg + 30 dgts)
Inductance Resolution 1 μH
Frequency 100 Hz, 1000 Hz, 10 kHz, 100 kHz, 1000 kHz, 10 MHz +/-(0.1% rdg + 5 dgts)
Frequency Resolution 0.01 Hz
Duty Cycle 0 to 90 % 5 V logic: +/-(2.0% rdg + 20 dgts)
Duty Cycle Resolution 0.01 %
Frequency Range 0 % to 10 %: 40 Hz to 990 Hz 10 % to 90 %: 40 Hz to 20 kHz
Logic Type TTL, CMOS
Thresholds Logic 1 (Hi) TTL 2.8 V +/- 0.8 V, CMOS 4 V +/- 1 V Logic 0 (Lo) TTL 0.8 V +/- 0.5 V, CMOS 2 V +/- 0.5 V
Logic Test Frequency Response 20 MHz
dBm -13 dBm to +50 dBm (45 Hz to 5 kHz) +/-(0.7 dB + 8 dgts) -13 dBm to +50 dBm (5 kHz to 10 kHz) +/-(2.5 dB + 8 dgts)
dBm Resolution 0.01 dBm
Continuity Audible Indication < 40 W
Response Time 100 ms
Diode Test Current 1.0 mA (approximate)
Open Circuit Voltage 3.0 V dc typical
Peak AC Volts Accuracy 100 V, 750 V +/-(3.0 + 200 dgts) 1000 mV, 10 V unspecified
AC Current 1000 μA, 10 mA, 100 mA, 400 mA, 10 A +/-(3.0 + 200 dgts) 100 μA unspecified
Overload Protection AC/DC Voltage 1000 V dc or 750 V ac rms
AC/DC Current μA/mA input: F0.5 A /1000 V fast-blow ceramic 6.3 mm x 32 mm 10 A input: F10 A /1000 V fast-blow ceramic 10 mm x 38 mm (10 A for 4 minutes maximum followed by a 12 minute cooling period)
Resistance, Continuity, Diode Test All ranges: 1000 V dc or 750 V rms
Display (Autoranging) 4-3/4 digit LCD, 10,000 counts with 41-segment analog bar graph
Display Update Rate 2/sec, nominal
Power Battery 9 V NEDA 1604, JIS 006P, IEC 6F22
Battery Life 150 hrs typical (alkaline) frequent use of backlight will decrease battery life
Operating Temperature 0 to 45 Degrees C at < 70% R.H.
Storage Temperature -20 to 60 Degrees C, 0 to 80 % R.H. with battery removed from meter
Temperature Coefficient 0.1 x (specified accuracy) per Degree C (0 to 18 Degrees C, 28 to 45 Degrees C)
Altitude 2000 m (6562 ft)
Dimensions 195 mm x 92 mm x 60 mm (7.75 in x 3.55 in x 2.4 in)
Weight (without holster, including battery) 450 g (1 lb)
Warranty (years): 3
Applications
Accessories
Specs and Videos

Technical Specs for Amprobe 37XR-A TRMS Digital Multimeter for Electronics Troubleshooting:

View File37XR-A    Size: (440.35 KB) 37XR-A

Customer Reviews

Handy and accurate Review by Gary
Quality
Price
Value

This meter has a size and weight. Great for Field Work. It brings True RMS, capacitance and inductance measurements to a tough handheld.

(Posted on 11/5/2012)

Easy to use and with handy options Review by arq12
Price
Value
Quality

This Amprobe Multimeter provides the necessary options to perform your most of your electrical measurements.

(Posted on 11/2/2012)

1 meter for all Review by himme1969
Price
Value
Quality

im an electrician in the coal mines this is a ruged meter that does the job of many it is simple to use and very accurate i love mine and would recommend it to anyone

(Posted on 10/26/2012)

This product is very handy working with electrical repairs Review by engineer
Quality
Price
Value

The procust covers all electrical test you need for checking continuity and voltage are my main uses.

(Posted on 10/19/2012)