Shimpo DT-315AEB Stroboscope and External Battery

ModelDT-315AEB MFG PartDT-315AEB
Availability In Stock

Write a Review

Price:
$735.00
Save:
$75.38
Special Price:
$659.62
Free UPS Ground Shipping within Continental US Free Ground Shipping

Shimpo DT-315AEB Stroboscope and External Battery

More Views

Quick Overview

Shimpo Stroboscope DT-315AEB operates independent of line power via an exterior battery pack that can be carried with a convenient shoulder harness or set down to allow the operator full movement for visual inspection. With Shimpo DT-315AEB stroboscope, rechargeable batteries power the strobe for approximately four continuous hours, when fully charged.
Characteristics
Extruded aluminum construction
External battery supply
Continuous duty cycle
Phase shift (in degrees of delay time)
Repeatable accuracy
Microprocessor-controlled
External trigger
Synchronous output
Flash timer control
Highly polished focused reflector
Manual flash controller knob
Description
Shimpo Stroboscope DT-315AEB operates independent of line power via an exterior battery pack that can be carried with a convenient shoulder harness or set down to allow the operator full movement for visual inspection. With Shimpo DT-315AEB stroboscope, rechargeable batteries power the strobe for approximately four continuous hours, when fully charged.
Specifications
INTERNAL MODE
Flashing Range40.0 - 35,000 FPM (flashes per minute)
Accuracy±0.01 % of reading
Resolution0.1 FPM : 40.0 - 5,000 FPM; 0.2 FPM : 5,000 - 8,000 FPM; 0.5 FPM : 8,000 - 10,000 FPM; 1 FPM : 10,000 - 35,000 FPM
Phase ShiftUse +/- push buttons (360° in 6 seconds)
Display Update Time0.2 seconds approx.
Output SignalSynchronous, 400 μsec. Pulse output, 0 to +12 VDC amplitude (approx.), 4.7 KΩ impedance
Rate Multiplier/DividerMultiply by 2, divide by 2
EXTERNAL MODE
Flashing Range0.0 to 35,000 FPM
Accuracy±0.01 % ±1 digit
Phase Shift0 to 359° with 1° resolution
Delay Time0 to 2,000 μsec from 40 - 10,000 FPM
External Trigger Input SignalLO level : 0 -0.8 VDC, HI level : 2.5 - 12 VDC or open collector (NPN), pulse width 50 μsec min.
Input Impedance4.7 KΩ to 12 V / 6.8 KΩ to 0 V
GENERAL
Display5 digits, 0.4" (10 mm) high, LED
Flash Tube Power/LifeXenon, 10 W max. (100 million flashes)
Flash Duration10 - 40 μsec
Sensor Power Supply12 VDC (40 mA)
Low Battery IndicatorDisplay shows all L’s
Power RequirementExternal battery pack (9.8 - 14.5 VDC, 2.3A)
Operating Temperature Range32° - 104° F ( 0 - 40° C )
Weight2.5 lb (1.1 kg)
Dimensions7.28" L x 4.72" W x 4.72" H (185 mm x 120 mm x 120 mm)
Warranty1 year
Standard AccessoriesExternal battery pack with charger
Applications
Accessories
Specs and Videos

Technical Specs for Shimpo DT-315AEB Stroboscope and External Battery:

View FileShimpo-DT-315AEB    Size: (629.22 KB) Shimpo-DT-315AEB