Tempo 402K CATV Cable Tone Test Kit

Model402K MFG Part8677
Availability In Stock

Write a Review

Price:
$197.80
Save:
$24.72
Special Price:
$173.08

Tempo 402K CATV Cable Tone Test Kit

More Views

Quick Overview

Tempo 402K CATV Cable Tone Test Kit has been designed specifically for the CATV industry. The 402K tone and probe kit is simple to use and provides fast, accurate results. Note: 402K tone and probe kit was formerly sold as Progressive Electronics.
Characteristics
Characteristics Greenlee 402K CATV Cable Tone and Trace Set
  Strong signal goes through splitters and other passive devices
  Four tones to identify up to 4 cable runs
  Very simple to use
  Volume control to adjust signal strength
  Visual and audible signal identification by the probe
  Durable and rugged design
Description
Tempo 402K Cable Tone and Probe Kit sends tone through any passive device along the cable path, such as splitters, traps and directional couplers. No more figuring out non- tagged or mistagged cable drops.

The 402K is simple to use and provides fast, accurate results. Transmitter and receiver are equipped with female F-type connectors and provide both audible and LED test and tone indications. Optional adapter test leads allow 402K use on distribution cables as well as wire pairs or signal conductors. User defined tone output allows up to four 402T Toner units to be used simultaneously for tracing multiple cable runs.

As a continuity tester, the 402K provides both audible tone and LED display to indicate resistance levels and identifies the presence of AC or DC voltage on the cable under test. The newly-designed 402R receiver provides three methods of signal reception: Electrostatic pickup for non-terminated cables; Electromagnetic pickup for terminated or shorted cables; and, Direct connection when identifying in the presence of passive devices.

Tempo 402K CATV Cable Tone Test Kit consists of one transmitter, one receiver, one male F-to-F connector adapter, one male F-to-alligator clip adapter cable and the rugged 700C Carrying Case (also available separately.)

Tempo 402K CATV Cable Tone Test Kit has been designed specifically for the CATV industry.
Specifications

Specifications:
Tempo 402K CATV Cable Tone Test Kit
Power: Two 9V batteries
Battery life: Transmitter, 25+ hrs, receiver, 50+ hrs (nominal)
Tone output: Pulsing, 15 dBm into 75 ohms, alternating, 18 dBm into 75 ohms
Transmitter frequency: 75 KHz nominal
Voltage protection: Transmitter, 60V (in OFF position); receiver, 50V
High impact ABS housings: Woven polyester case, 14.4 oz total kit
Applications
Accessories
Specs and Videos

Technical Specs for Tempo 402K CATV Cable Tone Test Kit:

View File402K-Tempo    Size: (526.32 KB) 402K-Tempo