TSI 8475-09 Omnidirectional Air Velocity Transducer with 9in Probe

Model8475-09 MFG Part8475-09
Availability In Stock

Write a Review

Price:
$1,590.00
Free UPS Ground Shipping within Continental US Free Ground Shipping
Authorized Distributor
Request a QuoteClick Here

TSI 8475-09 Omnidirectional Air Velocity Transducer with 9in Probe

More Views

Quick Overview

TSI 8475-09 Omnidirectional Transducer for Air Velocity works as a temporary or permanent installation to take air velocity measurements in a variety of applications and is ideal for low velocities and varying direction of flow. TSI 8475-09 has an on-board circuit that provides signal output as current or voltage for transfer to a data logger or other acquisition system. Includes a 9-inch probe. Made in the USA and includes a NIST Calibration Certificate.
Characteristics
Omnidirectional probe tip
9 inch probe
Protective sleeve
Ideal for unknown or varying flow direction
Accurate at low velocities from 10 to 100 ft/min (0.05 to 0.5 m/s)
NIST calibration certificate
Includes:Probe attached to 16.4-ft (5-m) cable connected to control module, Compression fittings for mounting in duct work, Two holding clips to mount probe to parallel surface, Operation and service manual
WarrantyTwo-year limited warranty
Description

TSI 8475-09 Omnidirectional Transducer for Air Velocity works as a temporary or permanent installation to take air velocity measurements in a variety of applications and is ideal for low velocities and varying direction of flow. TSI 8475-09 has an on-board circuit that provides signal output as current or voltage for transfer to a data logger or other acquisition system. Includes a 9-inch probe. Made in the USA and includes a NIST Calibration Certificate.

Specifications
Specifications: TSI 8475-09 Omnidirectional Transducer for Air Velocity
Accuracy ±2.0% of reading, ±0.5% of full scale of selected range
Field Selectable Range
25 ft/min to 200, 250, 300, 400, 500, 750,
1,000, 1,250, 1,500, 2,000, 2,500, 3,000, 4,000, 5,000,
7,500, 10,000 ft/min (0.125 m/s to 1.0, 1.25, 1.50, 2.0,
2.5, 3.0, 4.0, 5.0, 7.5, 10.0, 12.5, 15.0, 20.0, 25.0,
30.0, 40.0, 50.0 m/s)
Repeatability <±1.0% of reading
Response to Flow
0.2 sec
Temperature Range
Compensation 32 to 140°F (0 to 60°C)
Operating (electronics) 32 to 200°F (0 to 93°C)
Operating (sensor) 32 to 200°F (0 to 93°C)
Storage 32 to 200°F (0 to 93°C)
Resolution (minimum) 0.07% of selected full scale
Input Power 11 to 30 VDC or 18 to 38 VAC, 350 mA max
Probe length 9 in
Output
Impedance Voltage mode: less than 1 ohm, 20 mA max source current
Resistance Current mode: 500 ohms maximum load
Signal Field selectable 0 to 5V, 0 to 10V,
0 to 20, 2 to 10V, mA, 4 to 20 mA
Time Constant Field selectable 0.05 to 10 seconds
Applications
Applications: TSI 8475-09 Omnidirectional Transducer for Air Velocity
  Great for draft and comfort studies, critical environments, diffuser analysis,
dry process monitoring, subway and tunnel airflow monitoring, greenhouse monitoring,
IAQ applications, engineering applications
Accessories
Specs and Videos

Technical Specs for TSI 8475-09 Omnidirectional Air Velocity Transducer with 9in Probe:

View FileTSI-8475-09    Size: (479.8 KB) TSI-8475-09