AEMC GX320 Function Generator features DDS technology with a frequency range of 0.001Hz to 20MHz. The AEMC GX320 model can precisely generate waveform, sine, triangle, square and LOGIC, TTL output signals. The AEMC GX320 Function Generator is equipped with a large LCD display that has adjustable backlighting and contrast.
- Frequency range from 0.001Hz to 20MHz
- DDS technology and frequency accuracy of ± 20 ppm
- Frequency adjustment stable to the nearest digit
- "LOGIC signal" function for direct adjustment of high and low levels
- LIN or LOG sweep, triangle or sawtooth with adjustable duration from 10 ms to 100 s
- Internal and external AM & FM modulation, GATE, BURST, FSK and PSK functions
- Adjustable phase synchronization of several generators in a cascade arrangement
- 100MHz frequency meter, 300V CAT I
- Storage of 15 complete instrument configurations
- Programmable versions via USB
Specifications | AEMC GX320 Function Generator |
Interface | |
Display | LCD (125 x 45mm) - Adjustable brightness Display of frequency on 5 digits 20mm high |
Commands | 19 direct-access commands (9 backlit and adjustable) 1 Line Out On/Off key - 1 digital encoder wheel |
Adjustment of Signal Parameters | Continuous by the encoder, automatic frequency and level ranges, selection of the Increment digit (F,P,N..) |
BNC Output Terminals | TTL, Sweep, Clock and Synch outputs |
BNC Input Terminals | VCG, Gate, Clock and Synch Inputs |
Continuous Signal Generation | |
Frequency | 0.001Hz to 20.000MHz (11 ranges) |
Resolution / Accuracy | 5-digit display - resolution from 1mHz to 1kHz according to frequency range, ± 20ppm for F > 10kHz, ± 30ppm for F < 10kHz |
Amplitude | 1mV to 20.0Vpp with open circuit in 3 automatic ranges - 3-digit Vpp or Vrms display |
Flatness | ± 1dB up to 20MHz (specs. for level from 0.1 Vpp to 20Vpp) |
VDC Offset | ± 10VDC with open circuit - accuracy ± 5% ± 5mV |
Waveforms | Sine/Triangle (max frequency 2MHz)/Square & "LOGIC"/TTL output |
Frequency | |
Modes | LIN (linear) or LOG (logarithmic) |
"INT" Internal sweep | "Sawtooth" or "Triangle" mode Unlimited excursion between "F Start" & "F Stop" (256 steps) Sweep time adjustable from 10ms to 100s |
"EXT" Internal sweep | Sweep by signal < 15kHz, amplitude ± 10V VCF IN Input Impedance 10kO approx. |
Modulations | |
Internal AM | Modulation by a sine signal with a fequency of 1kHz Modulation rate 20% or 80% |
External AM | Modulation by a signal with a frequency < 15kHz |
Internal FM | Modulation by a sine signal with a frequency of 1kHz |
External FM | Modulation by a signal with a frequency < 15kHz |
Functions | |
Shift K | FSK (Internal/External) = switching between F start & F stop PSK (Internal/External) = phase switching ± 180° |
Burst | Internal: 1 to 65,535 impulsions pulse train period from 10ms to 100s External: 1 to 65,535 impulsions - Synch/Period by a TTL signal with a frequency < 200kHz (VCG IN Input) |
Gate | Validation of the AC component of "Line Out" by a TTL signal with a frequency < 2MHz (GATE IN input) |
Synch | Maximum frequency of signals generated 100kHz Adjustment of phase shift across ± 180° (resolution 1°) |
External Frequency Meter | |
Measurement Range | 5Hz to 100MHz |
Accuracy | ± 0.05% + 1 count |
Safety / Max Acceptable Voltage | 300V CAT I / 300VRMS |
General Specifications | |
Configuration Memories | Storage / Recall of 15 complete instrument configurations |
Communication Interface | "USB A/B" link for the programmable versions and Ethernet Interface |
Power Supply | 115V ± 10% or 230V ± 10%; 50/60Hz - 20VA max. - Internal selection |
Safety / EMC | Safety as per IEC 61010-1 (2001) - EMC as per EN 61326-1 (2004) |
Proposition 65 Warning for California Residents: This product can expose you to chemicals including Benzene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Applications | AEMC GX320 Function Generator |
R & D | |
Educational Labs | |
Research |