| Specfications: | AEMC PEL 105 Power and Energy Logger Wireless with 4 Waterproof Sensors |
| Sampling Frequency | 128 samples per cycle; 50/60Hz (16 samples/cycle 400Hz) |
| Data Storage Rate | 1 per second (200ms also available on PEL 105) |
| Demand Period Storage Rate | User selectable (1, 2, 3, 4, 5, 6, 10, 12, 15, 20, 30 and 60 minutes)
Recorded Parameters |
Recorded Parameters
(Single- and Poly-Phase) | V, I, W, VA, var, PF, Tan, Wh, VAh, varh, THD (V and I),
Individual harmonics (from 1 through 50 per phase); Crest Factor (CF), Cos f / DPF |
| Event Log | Tracks and records status changes and error messages along with recorded data |
| Front Panel Indicator LEDs | Bluetooth active, recording in progress, phase connection reversal, overload, battery charging and SD Card status |
| Storage Capactiy | SD card included / SD cards up to 32 GB formatted FAT32 are supported |
| Inputs Voltage | PEL 102/103: 4 input channels; PEL 105: 5 input channels via 4mm safety banana jacks |
| Current | PEL 102/103: 3 current input channels ; PEL 105: 4 input channels via custom 4 pin jacks that accept AEMC® probes and sensors |
| Electrical |
| Voltage Measurement | PEL 102/103 RANGE | PEL 105 RANGE | RESOLUTION/ACCURACY* |
| 50/60Hz | 42.5 to 69Hz | 42.5 to 69Hz | ±0.1Hz |
| Single-Phase RMS Voltages | 10 to 1000Vrms | 10 to 1000Vrms | 0.1V/±0.2% Rdg ± 0.2V |
| Phase-to-Phase RMS Voltages | 17 to 1700Vrms | 17 to 1000Vrms | 0.1 to 1V/±0.2% Rdg ± 0.4V |
| 400Hz | 340 to 460Hz | 340 to 460Hz | – |
| Single-Phase RMS Voltages | 10 to 600Vrms | 10 to 600Vrms | 0.1V/±1% Rdg ± 1V |
| Phase-to-Phase RMS Voltages | 17 to 1200Vrms | 17 to 600V | 0.1 to 1V/±1% Rdg ± 1V |
| DC | 100 to 1000V | 10 to 1000V | 0.1V/±1% Rdg ± 3V (typical) |
| PT Ratios | Programmable from 50 to 650,000V | - | 0.01 to 0.1V |
| Current Measurement | A193*** | 196A*** | - |
Nominal range for current probes supplied
with kit. See chart on pg 11 for other probes | 200mA to 3000Arms | 200mA to 10,000A | - |
| CT Ratios | Programmable from 1:1 to 25,000:1 (probe dependent) |
| Power Measurements | Range | Resolution | - |
| Active Power (P)* E= 1018 | -2 to 2GW | 0.001W | ±0.5% Rdg ± 0.005% Pnom |
| Reactive Power (Q)* | -2 to 2Gvar | 0.001var | ±1% Rdg ± 0.01% Qnom |
| Apparent Power (S)* | 0 to 2GVA | 0.001VA | ±0.5% Rdg ± 0.005% Snom |
| Power Factor | -1 to +1 | 0.001 | ± 0.05 |
| Tangent f (active/reactive power ratio) | -3.2 to +3.2 | 0.001 | ± 0.02 |
| Energy Measurements |
| Active Energy (EP) | 0 to 4 x 10"; 4Ewh | 1Wh | ±0.5% Rdg |
| Reactive Energy (EQ) | 0 to 4 x 10" ; 4Evarh | 1varh | ±2% Rdg |
| Apparent Energy (ES) | 0 to 4 x 10" ; 4EVAh | 1Vah | ±0.5% Rdg |
| THD | ± 655% |
| Individual Harmonics | 1 to 50 displayed in percentage; 1 to 7 at 400Hz
External Supply |
| External Supply | 110V/250V (10%) @ 50/60Hz; 400Hz |
| Power From Phase Measurement | PEL 102/103: requires optional Power Adapter Cat #2137.77; PEL 105: 100V to 1000Vac |
| Back-Up Power Source/Charge Time | Rechargeable 8.4V NiMH battery pack / Approximately 5 hours |
| Battery Life | 30 minutes minimum, 60 minutes typical |
| Mechanical |
| Communication Ports | USB 2.0, Ethernet (RJ45), Wireless Bluetooth Class 1 **/ PEL 105 only: Wi-Fi |
| Dimension/Weight | PEL 102/103: 10.08 x 4.92 x 1.46" (256 x 125 x 37mm) / 2.20lbs (1kg);
PEL 105: 10.6 x 7.1 x 9.65" (270 x 180 x 245mm) / 8.8lbs (4kg) |
| Case | PEL 102/103: Double insulated, rubber over-molded, polycarbonate UL94 V1 rated / PEL 105: Polycarbonate UL94 V1 rated |
| Mounting/Security | PEL 102/103: Kensington anti-theft system / Embedded magnets on back side, keyhole slot on back side |
| Display |
| Display Type | PEL 102/103: 2.63 x 2.16" (67 x 55mm), four line, monochrome, backlit LCD with adjustable brightness & contrast
PEL 105: 4.2 x 3.3" (107 x 84mm), four line, monochrome, backlit LCD with adjustable brightness & contrast |
| Environmental / Safety |
| Operating Temperature/Relative Humidity | PEL 102/103: 50° to 122°F (10° to 50°C) / 45 to 75%RH; PEL 105: -4° to 122°F (-20° to 50°C) / 45 to 75%RH |
| Storage Temperature | PEL 102/103: -4° to 122°F (-20° to 50°C) with batteries; -4° to 158°F (-20° to 70°C without batteries)
PEL 105: -40° to 95°F (-40° to 35°C from 0 to 95%HR); -40° to 158°F (-40° to 70°C from 0 to 75%HR) |
| Safety Rating / CE Rating | PEL 102/103: Complies with IEC 61010-1:Ed3, and IEC 61010-2-030:Ed1 for 1000V CAT III / 600V CAT IV, Pollution Degree 2 /
PEL 105: 1000V CAT IV, Pollution Degree 4 (closed) / Yes |
| Index of Protection | PEL 102/103: IP54 non operating / PEL 105: IP67 with cover closed |
Proposition 65 Warning for California Residents: This product can expose you to chemicals including Benzene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to 
