Alnor AVM410 Velometer Digital Thermal Anemometer is designed to measure both temperature and velocity. The Alnor AVM410 calculates volumetric flow and actual/standard velocity and displays up to 3 measurements at once.
- Temperature and Velocity measurements simultaneously.
- Simultaneously display up to 3 measurements.
- Actual velocity calculations.
- Data Hold function
- Weighs 0.6 lbs (0.27 kg)
- NIST calibration certificate, carrying case, users manual, and 4 alkaline batteries
|Specifications:||Alnor AVM410 Velometer Thermal Anemometer|
|Range||0 to 4,000 ft/min (0 to 20 m/s)|
|Accuracy||±5% of reading or ±5 ft/min (±0.025 m/s), |
whichever is greater
|Resolution||1 ft/min (0.01 m/s)|
|Range||0 to 200°F (-18 to 93°C)|
|Instrument Temperature Range|
|Operating (Electronics)||40 to 113°F (5 to 45°C)|
|Operating (Probe)||0 to 200°F (-18 to 93°C)|
|Storage||-4 to 140°F (-20 to 60°C)|
|Dimensions||3.3 in. x 7.0 in. x 1.8 in. (8.4 cm x 17.8 cm x 4.4 cm) |
|Weight||0.6 lbs. (0.27 kg)|
|Probe Dimensions||Length - 40 in. (101.6 cm) |
Diameter of Tip - 0.28 in. (7.0 mm)
Diameter of Base - 0.51 in. (13.0 mm)
Proposition 65 Warning for California Residents: This product can expose you to chemicals including Benzene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
|Applications:||TSI Alnor AVM410 Velometer Thermal Anemometer|
|Commissioning, Plant Maintenance, HVAC Troubleshooting, Critical Environment, Certification, Duct Traverses|
seems like a lot for what you get, but you have to remember the NIST Certificate is usually an $80 - $150 add on elsewhere.
Air flow meter
entry level device. Have had no complains with using it. Simple menu and few buttons to confuse you.
Readings at the same time
I like that you can have 3 readings on the screen at the same time. Makes it much easier to see everything that's going on when you're checking out a vent.