Alnor HM685 Digital Handheld Professional Hydronic Manometer is designed for balancing and checking performance on hydronic cooling and heating systems. The Alnor HM685 Hydronic Manometer features simultaneous high side and low side with differential pressure up to 300 psi, store and recall up to 4,000 measurements with included software, and two optional temperature probe inputs (1 probe included).
Key Features:
- Intuitive operation and easy setup
- Delivers inputs for two temperature probes
- Large backlit display for use in low light areas
- Robust, and splash-proof case
- Alnor HM685 Hydronic Manometer Digital
- Display and measure simultaneously high side, low side and differential pressure up to 300 psi
- Calculates flow based on manufacturer's Kv factors
- Can determine heat flow, brake power and impeller diameter
- Stores up to 4,00 measurements that can be retrieved with included software
- Case is splash proof and rugged
- Display is backlit for low light use
- Features inputs for 2 optional temperature probes
- Measurements include: in. H2O, ft. H2O, psi, in. Hg, mm H2O, kPa, mm Hg, or bar
- Includes:
- Gard carrying case, (2) 6.7 ft x ¼-in. (2 m x 6 mm) hoses with shut-off valves, (2) B&G readout probes, (2)
P/T gauge adapter probes, power cord, a temperature probe, CompuDat USB downloading software, and USB
interface cable.
Specifications: | Alnor HM685 Hydronic Manometer Digital |
Pressure | |
Differential Range | ±300 psi (±2068 kPa) |
Gauge Range | -20 to 300 psi (-138 to 2068 kPa) |
Resolution (best) | 0.001 psi (0.01 kPa) |
Accuracy | ±1% of reading +.072 psi (0.5 kPa) |
Units | psi, in. H2O, ft H2O, kPa, mm Hg, in. Hg, m H2O, bar |
Pressure Connection | 1/4” 37° flare fitting, Male |
Temperature | |
Operating (electronics) | 40 to 113°F (5 to 45°C) |
Storage | -4 to 140°F (-20 to 60°C) |
Liquid Media | 32 to 180°F (0 to 82°C) |
Probe | -40 to 250°F (-40 to 121 °C) |
Resolution | 0.1°F (0.1°C) |
Accuracy | ±0.5°F (0.3°C) from 32 to 160°F (0 to 71°C); max ± 2.0°F (1.2°C) from -40 to 32°F (-40 to 0°C) and from 160 to 250°F (71 to 121°C) |
Units | °F, °C |
Flow | |
Range | 0 to 2,271 m3/h, 0 to 9,999 USGPM (0 to 6,31 l/s) |
Resolution (best) | 0.0001 USGPM (0.00001 l/s) |
Accuracy | per pressure accuracy + valve deviation |
Units | USGPM, UKGPM, m3/h, l/s, l/m |
Time | Constant |
Data | |
Statistics | min, max, average, sum up to 4,000 readings |
Data Storage | 4,000 combined readings, 100 Test IDs |
Logging Interval | User selectable (1, 5, 10, 20, and 30 seconds) |
General | |
External Meter Dimensions | 11.1 in. × 4.7 in. × 3.5 in. (28.2 cm × 11.9 cm × 8.8 cm) |
Meter Weight with Batteries | 2.65 lbs (1.20 kg) |
Power Requirements | Four AA-size cells, or AC adapter |
Proposition 65 Warning for California Residents: This product can expose you to chemicals including Benzene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
TSI Alnor HM675 Hydronic Manometer Introduction
TSI Alnor HM675 Hydronic Manometer Zeroing Sensors and Purging Air
TSI Alnor HM675 Hydronic Manometer Measurements
Accurate
Accurate and easy to use
Did you find this helpful?
9 of 10 Found Helpful
Reviewed by: (Verified Buyer) Luka Romero from Edison, NJ.
on 9/23/2022
5
great troubleshooting instrument
Measures high and low pressure, calculates flow to help evaluate and analyze system. Data storage for future downloads and reports. Great performer at all times. I highly recommend it to all working with hydronic heating systems.
Did you find this helpful?
8 of 9 Found Helpful
Reviewed by: (Verified Buyer) Sam Samuelson from City of Industry.
on 12/15/2018
5
you get what you paid for
Very good quality instrument, great US worksmanship, NIST calibration to eliminate reading errors. Datalogging for gaining more efficiency and creating reports. I have used it many times and it's been accurate every single time. This is what I like.
Did you find this helpful?
8 of 9 Found Helpful
Reviewed by: (Verified Buyer) Amos Pretel from Bakersfield.
on 11/8/2018
5
The best
This unit is really a must for working on an advanced hydronic system. Obviously it is a bit pricey but the ability to datalog at selected intervals as well as check flow and determine certain physical dimensions of the system are a life saver. highly accurate, NIST certified and built to last. Makes fine-tuning involve almost zero guesswork.
Did you find this helpful?
8 of 9 Found Helpful
Reviewed by: (Verified Buyer) Wallace Nash from United States.
on 3/3/2018
5
Elaborate pump system
Our factory has a huge system of pumps to keep everything moving and they need to be checked for efficiency and to make sure they are running smoothly. There’s no substitute for a specialty meter like this manometer to get that done. Our small technician staff got trained on this and it works great for us. NIST certified since we have some oversight and that’s essential. Great datalogging features and it’s rugged enough to deal with the environment and withstand changing hands if some folks aren’t so careful with their instruments.
Did you find this helpful?
5 of 7 Found Helpful
Reviewed by: (Verified Buyer) Charlie Smith from Miramar.
on 8/12/2022
5
Keep occupant comfortable
HM685 makes it easier to keep building occupants comfortable and the operating cost down.
Did you find this helpful?
3 of 5 Found Helpful
Reviewed by: (Verified Buyer) Joel Sanders from Reno NV.
on 9/22/2022
5
best hydronic meter
when it comes to hydronic manometers, this is the best one. Built tough, reliable and accurate measurement and extra memory to keep 4000 results. I have not had such a reliable meter before.
Did you find this helpful?
3 of 5 Found Helpful
Reviewed by: (Verified Buyer) Mike Mullins from Warwick.
on 1/17/2019
5
Related Items
(2)
Coming Soon
(0)
In Stock
Free Shipping.
(0)
In Stock
Free Shipping.
(0)
Coming Soon
Free Shipping.