Amprobe ACD-10 Plus Clamp Multimeter with Thin Jaws features thinner jaws over standard clamp meters, allowing for measurements in tight spaces while accommodating conductors up to 25mm. The Amprobe ACD-10 Plus Clamp Multimeter with Thin Jaws Digital Clamp Meter measues capacitance and frequency.
- Amprobe ACD-10 Plus Clamp Multimeter with Thin Jaws
- 10mm (0.4in) thin jaws
- Continuity audible alert
- Measures frequency
- In rush current
- Reading functions include Hold & Maximum
- Conductors up to 26mm (1.02in) in diameter accommodated
- Auto ranging
- Auto shutoff
- Durable rubber over-molded case
- Overload protected
- Battery, soft carrying case, test leads and user manual included
|Specifications:||Amprobe ACD-10 Plus Clamp on Multimeter|
|AC & DC Voltage||to 600V|
|AC Current||to 600A|
|Resistance||to 40 Mohms|
|Capacitance||to 3000 uF|
|Display||3-3/4 digits 4000 counts LCD display|
|Update Rate||3 per second nominal|
|Operating Temperature:||0 C to 40 Degrees C; < 80% RH for temperature up to 31 Degrees C decreasing linearly to 50% RH at 40 Degrees C|
|Altitude||Operating below 2000m; Indoor use|
|Storage Temperature||-20 C to 60 Degrees C, < 80% RH (with battery removed)|
|Temperature Coefficient||nominal 0.15 x (specified accuracy)/Degrees C @(0 C ~ 18 Degrees C or 28 C ~ 40 Degrees C)|
|Low Battery||Below approx. 2.4V|
|Power Supply||3V coin battery IEC-CR2032|
|Power Consumption||2.8 mA typical except that 3.3 mA typical for ACA function|
|APO Timing||Idle for 30 minutes|
|APO Consumption||5 uA typical|
|Safety||Meets EN61010-2-032, UL61010B-2-032, IEC61010-1 2nd Ed., EN61010-1 2nd Ed., UL61010-1 2nd Ed. CAT III-600 Volts ac & dc; Pollution degree : 2|
|Size||190 x 63 x 32 mm (7.4 x 2.5 x 1.3 in)|
|Weight||139 gm approx|
Proposition 65 Warning for California Residents: This product can expose you to chemicals including Benzene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Great features for the price, however...
This meter does almost everything you'd want it to if you're looking for a multimeter. It will check volts, amps, duty, Hz and capacitance with relative ease and quick readings.It doesn't feature anything that would be great for an HVAC trades person, as it doesn't do microamps, but it's handling of DCmV is excellent and was actually slightly more accurate than my more expensive meter.For the price, it's great. As a backup for a more expensive meter, it will do in a pinch, and it's great for people in non-specific trades that only need the features it offers. It fits great in the hand and has a large display with a good backlight.Battery life is astounding!
made me feel safer
this was the first clamp type meter I have ever used. I was helping an electrician freind with a wiring job. I used the clamp meter to check that power was properly routed and also to verify power was off. In the past I had always used probe type and always had the thought of accidentally touching wires on the back of my mind. This meter made me feel a whole lot safer and made the job much easier. This will be the brand and type of meter I buy when I am ready, very soon I think.
great for all purposes
This product has the most wide range of different things you can use it for.
This meter is rugged and has been a great testing tool
I have used this meter for checking computer room wiring and load balance to grounding issues.It has been droped andKeeps on Ticking.A must tool for general electrial testing.