Amprobe ACD-10 TRMS Plus Clamp on Multimeter offers thinner jaws over standard clamp meters, allowing access to tight measurement areas and still accommodating conductors up to 25 mm. This clamp on multimeter measures capacitance and frequency and is a True RMS version for noisy measurement environments for a more accurate reading.
- Thin Jaws, only 10mm (0.4 inches) thick
- Continuity Buzzer
- Frequency measurement
- In rush current
- Hold & Maximum reading functions
- Accommodates conductors up to 26mm (1.02 inches) in diameter
- Auto ranging
- Auto power off
- Rubber over-molded case
- Overload protected
- Test leads, battery installed, soft carrying pouch, and users manual
- TRMS Measurement
Specifications: | Amprobe ACD-10 TRMS Plus Clamp on Multimeter |
AC & DC Voltage | to 600V |
AC Current | to 600A |
Resistance | to 40 Mohms |
Capacitance | to 3000 uF |
Display | 3-3/4 digits 4000 counts LCD display |
Update Rate | 3 per second nominal |
Polarity | Automatic |
Operating Temperature: | 0 C to 40 Degrees C; < 80% RH for temperature up to 31 Degrees C decreasing linearly to 50% RH at 40 Degrees C |
Altitude | Operating below 2000m; Indoor use |
Storage Temperature | -20 C to 60 Degrees C, < 80% RH (with battery removed) |
Temperature Coefficient | nominal 0.15 x (specified accuracy)/Degrees C @(0 C ~ 18 Degrees C or 28 C ~ 40 Degrees C) |
Low Battery | Below approx. 2.4V |
Power Supply | 3V coin battery IEC-CR2032 |
Power Consumption | 2.8 mA typical except that 3.3 mA typical for ACA function |
APO Timing | Idle for 30 minutes |
APO Consumption | 5 uA typical |
Safety | Meets EN61010-2-032, UL61010B-2-032, IEC61010-1 2nd Ed., EN61010-1 2nd Ed., UL61010-1 2nd Ed. CAT III-600 Volts ac & dc; Pollution degree : 2 |
Size | 190 x 63 x 32 mm (7.4 x 2.5 x 1.3 in) |
Weight | 139 gm approx |
Proposition 65 Warning for California Residents: This product can expose you to chemicals including Benzene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Easy to use
I am a facility manager and I use this amprobe meter quite often. It is very easy to use. Comes in handy when checking and troubleshooting motors and pumps. I would not exchange this tool for anything else.
Did you find this helpful?
9 of 10 Found Helpful
Reviewed by: (Verified Buyer) Pete from US.
on 4/27/2018
5
solid meter
We use this meter in an HVAC program. It is easy to use, reliable and tough.
Did you find this helpful?
8 of 9 Found Helpful
Reviewed by: (Verified Buyer) samsam from US.
on 4/18/2018
5
Always works
Have used only amprobe brand amp probes since the 70's,never had a problem and only purchased new models when changing to digital and harmonics,with the ability to accessorize and put in a case,they are the best designed probes available.
Did you find this helpful?
8 of 9 Found Helpful
Reviewed by: (Verified Buyer) Craig from United States.
on 2/6/2018
5
Excellent Product
This Multimeter is perfect for the industry I work in which is Telecom. We use these regularly when installing our power circuits that feed our equipment. The ease of use is second to non and the accuracy is spot on.
Did you find this helpful?
7 of 8 Found Helpful
Reviewed by: (Verified Buyer) Telecom23 from US.
on 2/24/2018
5
Excellent tool!!!
Tool overall is easy to read,use and utilize especially in tough working conditions. It provides a good grip feel in your hands, and a sense of trust in this quality equipment when safety is most important.TRMS is an excellent, high quality feature
Did you find this helpful?
5 of 7 Found Helpful
Reviewed by: (Verified Buyer) smolaman from Canada.
on 3/1/2018
5
Quality tools are the key to success.
On a one to ten scale I would rate this Multimeter and Amp meter combination to any one in the HVAC/R field of work. It has all the functions needed to troubleshoot an HVAC/R system. Easy to use and is rugged.
Did you find this helpful?
3 of 5 Found Helpful
Reviewed by: (Verified Buyer) McGiver from United States.
on 6/28/2018
5
one tool many uses
I have enjoyed using the acd10 amp/multi meter because it reduces the amount of meters to carry when trouble shooting an air conditioning system and have found it to be very useful.
Did you find this helpful?
3 of 5 Found Helpful
Reviewed by: (Verified Buyer) DoctorCool from US.
on 4/12/2018
5
Very easy to use, a lot of options.
I have used this in an industrial setting for a while and have always had accurate results.
Did you find this helpful?
2 of 3 Found Helpful
Reviewed by: (Verified Buyer) FD213 from US.
on 5/5/2018
5