The Amprobe ACDC-54NAV TRMS ACDC Clamp-on Power Meter 1000A features AC/DC voltage up to 1000V, AC/DC current measurements up to 1000A, extensive jaws to accommodate large conductors up to 1.6 inches (40mm) for high voltage industrial environments, and temperature capabilities. This multimeter offers a wide range of power quality diagnostics including total harmonics distortion, power and power factor, in-rush current, individual harmonics, phase sequence, TRMS and low pass filter for verifying system conditions and industrial power monitoring.
Chracteristics: | Amprobe ACDC-54NAV TRMS ACDC Clamp-on Power Meter 1000A |
TRMS for accurate measurements | |
Measures AC/DC current to 1000A, AC/DC Voltage to 1000V, frequency, plus resistance, power and power factor, capacitance, individual harmonics (1-25), and total harmonics distortion (THD) | |
Measures temperature range: -58 Degrees F to 1832 Degrees F (-50 Degrees C to 1000 Degrees C) | |
Phase rotation indication for 3-phase motors & inrush current measurement | |
Able to detect voltage with no direct contact - ensures user's safety | |
Low pass filter for measuring frequency and voltage on variable frequency drives | |
Audible Continuity beep for opens and shorts | |
Full, backlit display with analog bar graph display | |
Min/Max Data retain | |
Peak hold for spikes and transients | |
Automatic in-jaw flashlight for dark locations | |
Automatic Shut-off feature | |
Jaw accommodates conductors up to 45mm or 1.60 inches in diameter | |
Exterior rubber casing withstands shocks - drop resistant up to 4 feet | |
CAT IV rated | |
Includes batteries, user's manual, carrying case, and test leads |
Proposition 65 Warning for California Residents: This product can expose you to chemicals including Benzene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Love it
This may be the 7th multimeter I have had in the past 40 years and it is the best, and it includes power monitoring functions and inrush current measurement and temperature.
Did you find this helpful?
9 of 10 Found Helpful
Reviewed by: (Verified Buyer) BonnsLtd from US.
on 3/21/2018
5
great tool very usefull
I am a commercial Plumber and this tool has been very helpful in setting up and diagnosing rooftop HVAC units
Did you find this helpful?
5 of 7 Found Helpful
Reviewed by: (Verified Buyer) bwoods from United States.
on 2/27/2018
5
clamp meter
I have been using this amprobe clamp meter for a while and would not concider any other. The features of this meter are easy to use and easy to read. the temp probe addition makes it a great all in one meter.
Did you find this helpful?
3 of 5 Found Helpful
Reviewed by: (Verified Buyer) fordron61 from Canada.
on 4/23/2018
5
The ACD-54NAV is is now my favorite job site meter
Strengths:? All-in-one Multimeter, Current Clamp, and Thermocouple Temperature Probe.? Extremely rugged construction that will withstand harsh environments.? Almost perfect one-handed operation.? Good set of included accessories.? Non-Contact Voltage feature actually works.? Built-In LED Flashlight.Weaknesses:? Menu system can be confusing. Reading the manual is REQUIRED.? Option rotary switch is a bit stiff for one-handed operation.The ACDC-54NAV is my favorite meter for the job site where AC/DC testing, verification, and troubleshooting are required. This meter is near perfect for the electrician/engineer that regularly works with residential or commercial HVAC, AC Hydraulics, or DC Telco. I regularly fly to job sites across the country and need a meter that's small and tough enough to pack in my checked luggage without worrying about it getting broken. The ACDC-54NAV is perfect for this.One feature I did not like on the low end Amprobe meters, a non-contact voltage detection called VoltSense, actually works flawlessly on the ACDC-54NAV. I was able to reliably confirm the presense of an AC voltage on wall outlets, power cords, appliances, power supplies, motors, and just about anything else electrical with an AC voltage. DC voltages can also be detected by flicking the clamp past voltage source which flashes the VoltSense LED. This is a great feature for checking for an energized circuit without having to pull out and attach test probes. VoltSense does not detect voltages in walls or at distances of more than an inch from the voltage source.The ACDC-54NAV is one of the best instruments I have used for the work I do and is now my favorite job site tester when I travel. It has all the features I need and has taken a lot of abuse and isn?t obscenely expensive. I highly recommend the ACDC-54NAV for the electrician or electrical engineer that needs to test and verify AC/DC power equipment in a commercial environment.
Did you find this helpful?
1 of 1 Found Helpful
Reviewed by: (Verified Buyer) netzener from US.
on 1/28/2018
4
Related Items
(1)
Coming Soon
Free Shipping.
(0)
Coming Soon
Free Shipping.
(3)
In Stock
(3)
In Stock
Free Shipping.