Amprobe RS-1007 PRO CAT IV Rated Analog Clamp Meter 1000A operates in temperatures ranging from 5F to 122F. The Amprobe RS-1007 PRO CAT IV Rated Analog Clamp meter 100A Clamp Meter Analog measures Amps and Volts without the need for batteries.
- Measures AC Current up to 1000A
- Measures Voltage up to 600 VAC
- Resistance and Continuity
- Pointer Lock - Data hold
- Easy to use Rotary Scale
- Measures Volts and Amps, no batteries required
- Works in temperatures from 5°F to 122°F
- Operates on 50 and 60 Hz frequency
- CAT IV, 600 V Safety Rated
- Test leads, battery (installed, for resistance measurement only), Users Manual, Carrying Case
| Specifications: | Amprobe RS-1007 1000A PRO CAT IV Analog Clamp Meter |
| Display | Analog scales with clamping needle |
| Jaw opening/Conductor diameter: | 41mm (1.64") max |
| Power Supply Volt/amp | powered by circuit under test 1.5 V AAA battery (ANSI/NEDA-24A, IEC LR03) |
| Environmental | Indoor operation; below 2000m (6,562ft) |
| AC Voltage (50/60 Hz) | 150/300/600 Vrms |
| Accuracy | ± 3 % of Full Scale |
| Input Impedance | 1.5 MOhm |
| AC Amp (50/60 Hz) Ranges | 6/15/40/100/600 Arms |
| Ohms Range | 1000 ohms; 25 Ohms mid-scale |
| Accuracy | ± 3 degrees of Arc |
| Safety | CAT IV, 600 V Safety Rated |
| Dimensions | 261 x 102 x 41 mm (10.3 x 4.0 x 1.6 in.) |
| Weight | 0.474 kg (1.05 lb.) |
| Safety LVD | Category IV 600 Volts ac Meets EN60101-1:2001; EN61010-2-032(2002; pollution degree : II; class 2 |
| Accuracy: | ± 3 % of Full Scale |
Proposition 65 Warning for California Residents: This product can expose you to chemicals including Benzene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Excelent Meter, a real work horse
Over the years I have purchased three of this type Amprobe meter for my airconditioning repair company. The only failure I have ever experenced with one of these (in the 20+ years I have used them) was when I dropped one from a 20 foot ladder. I never repaired that one as it was badly damage but simply bought another, I also own the test leads, case and line splitter for each of them and Although now retired these are still being used for around the house repairs.
Did you find this helpful?
9 of 10 Found Helpful
Reviewed by: (Verified Buyer) Bobm90 from United States.
on 4/27/2018
5
There are some times when an analog meter works better then a digital.
I use a analog meter for working with street lighting. I can follow a fault on a cable with the analog meter when a digital meter won't show the spike in the circuit before the circuit breaker trips. If I pass the fault the meter shows nothing. Going from the source of power to the faulted area the meter will show a spike. I still have several of the black RS-3's in my tool bag and still use them.
Did you find this helpful?
8 of 9 Found Helpful
Reviewed by: (Verified Buyer) Jimbo from United States.
on 6/8/2018
5
Highest recommendations
When I first got into the HVAC trade, my parents bought me an Amprobe clamp on analog ammeter. A few years later, it was stolen. I replaced it with another Amprobe analog. Those that say you need to interpret the readings don't know how to use a meter. This meter is easy to use and reliable. Also, you don't have to worry about the cold or extreme heat affecting the display or the batteries. Great product! Keep up the good work Amprobe!
Did you find this helpful?
8 of 9 Found Helpful
Reviewed by: (Verified Buyer) dochavoc from Canada.
on 4/15/2018
5
Digital Products are replacing Analog Units
I would put my tool investment into a digital product with a more viersitale clamp probe or rope. This unit will perform for you based on your ability to interpuit the scale. I would say analog meters are becoming sepciality units.
Did you find this helpful?
8 of 9 Found Helpful
Reviewed by: (Verified Buyer) Sodapops from US.
on 4/1/2018
5
This probe in my opinion one of the best
I am a long time user of Amprobe products. The ease of use of there meters is one of the main reasons I use them. My first meter was the the RS-3 which I still own and use to this day. I would definitely recommend any of there products to others. Any tool that lasts 25+ years is worth owning.
Did you find this helpful?
7 of 8 Found Helpful
Reviewed by: (Verified Buyer) Jeff91 from Canada.
on 4/11/2018
5
Great durability.
I have had 2 Amprobe meteres since 1979. The product is very durable and accurate.
Did you find this helpful?
5 of 7 Found Helpful
Reviewed by: (Verified Buyer) Rlfreshair7 from .
on 4/23/2018
5
Tried and true.
Great for the money accurate readings. Would definately recommend.
Did you find this helpful?
3 of 5 Found Helpful
Reviewed by: (Verified Buyer) timlaw77 from US.
on 2/7/2018
5
Best in Class With Class
Lot of others on the market but for dependability, accurate and easy to use features you cant beat this analog meter. A meter you can trust every time and it is easy to use for a apprentice or a journey man.
Did you find this helpful?
2 of 3 Found Helpful
Reviewed by: (Verified Buyer) DA1TP from US.
on 1/27/2018
5
Related Items
(0)
FIND REPLACEMENT
Replacements Extech MA443 Amprobe RS-3 Pro
