Monitors differential pressure of air and compatible gases and liquids with 0.5% accuracy. The design employs dual pressure sensors converting pressure changes into a standard 4 to 20 mA output signal or field selectable voltage.

Microprocessor-based high performance transmitter, which has flexible pressure calibration, push button configuration, and is programmable using HART® Communication. The multiplanar design simplifies installation, saving you time and money during set up.

The corrosion resistant 316L stainless steel wetted parts allow it to measure the pressure in a multitude of processes from hydraulic oils to chemicals. Available in absolute and gage pressure ranges with a variety of optional outputs, process connections and electrical terminations to allow you to select the right transmitter for your application.

A low cost, fixed range, stainless steel transmitter with ±0.30% accuracy. It is designed to continuously measure pressure for years in even the toughest environmental and media conditions. Transmitters are explosion-proof, (FM approved) and meet NACE standards for off-shore applications.

Fixed range transmitter designed for harsh environments and suitable for high shock and vibration applications. Constructed of stainless steel, the Series 673 provides a 4 to 20 mA output signal with 0.25% accuracy. Use the Series 673 in industrial OEM equipment, hydraulic systems, HVAC/R equipment, industrial engines and compressor control.

Compatible with a wide range of gases and liquids, and is specially designed for weatherproof service NEMA 4 (IP56). The Model 679 can measure pressures with an accuracy of ±.25%. This model provides a 4-20 mA output and is field adjustable.

Convert pressure into a standard 4-20 mA output signal. It can be used to accurately measure compatible gases and liquids compatible with its 316SS/316LSS wetted parts. Series IS626 full scale accuracy is 0.25%. Designed for industrial environments with a NEMA 4X (IP66) housing, this transmitter resists most effects of shock and vibration.

A microprocessor-based high performance transmitter, which has flexible pressure calibration, push button configuration, and programmable using HART® Communication. The Series 3200G is capable of being configured with the zero and span buttons, a field calibrator is not required for configuration.

3 in 1 instrument possessing a digital display gauge, control relay switches, and a transmitter with current output. Is ideal for pressure, velocity and flow applications, achieving a 0.5% full scale accuracy on ranges from 0.25 to 100"w.c. Two SPDT control relays with adjustable dead bands are provided along with a scalable 4-20 mA process output.

Combines two SPDT control relays, 4 to 20 mA process output, and Modbus communications with a large, brightly backlit 4-digit LCD that can easily be seen from long distances. The electrical wiring is enhanced with detachable terminal blocks, and removable terminals allow you to easily wire the terminal block outside the housing and then attach it to the circuit board.

Compact units that provide low cost, high performance pressure regulation of compressed air or air/water. The low torque, non-rising adjustment knob with locking capability provides easy and precise adjustment. Models for use with air are self relieving. Models for air/water are non-relieving.

The AFG Flow Grid is a fundamental pressure sensing device designed to transmit a continuous differential pressure signal. When this output is connected to a suitable measuring instrument (i.e., manometer, pressure transducer, etc.), it may be used to determine air velocity and volume flow rate.