1. Home
  2. Laboratory
  3. Digital Manometer
  4. Dwyer 490W-6-Kit Wireless Hydronic Differential Pressure Manometer with Sensors 0-50 and 0-200
Dwyer 490W-6-Kit Wireless Hydronic Differential Pressure Manometer with Sensors 0-50 and 0-200
490W-6-Kit Wireless Hydronic Differential Pressure Manometer

Dwyer 490W-6-Kit Wireless Hydronic Differential Pressure Manometer with Sensors 0-50 and 0-200

Part Number: 490W-6-HKIT
0 Review(s)
The Dwyer 490W-6 is an accurate and easy to use wireless hydronic differential pressure manometer to measure and balance gases or liquids in a wide variety of HVAC applications. The Dwyer 490W kit includes wireless transducers and a handheld device with the Dwyer Hydronic Application Software. The Dwyer hydronic manometer's Hydronic Application Software already has built-in valve charts for numerous manufacturers. The app allows users to select a valve, and by using the wireless transducer, monitor the differential pressure and flow across the valve. The differential pressure and flow measurement from the transducers is then displayed via Bluetooth on the handheld device.
On Sale: $2,995.00
Availability: Usually Ships in 3 to 5 Days
Free Shipping.

Choose Options

*
Write a Review Request a Quote
Authorized Distributor

Dwyer 490W-6-Kit Wireless Hydronic Differential Pressure Manometer


The Dwyer 490W-6 is an accurate and easy to use wireless hydronic differential pressure manometer for measuring and balancing gases or liquids in a wide variety of HVAC applications. The Dwyer Hydronic Manometer 490W kit includes wireless transducers and a handheld device with the Dwyer Hydronic Application Software.  The Hydronic Application Software already has a built in valve charts for numerous manufacturers. The app allows users to select a valve and by using the wireless transducer monitor the differential pressure and flow across the valve.  The differential pressure and flow measurement from the transducers is then displayed via Bluetooth on the handheld device.

Key Features


  • Rugged weatherproof handheld housing withstands 1.5m drop test
  • Wireless measurement of differential pressure, single pressure and air flow
  • Share logged data directly from handheld over Wi-Fi, GSM or CDMA networks
  • Bluetooth direct wireless communication provides range up to 65ft (19.8m)
  • Ergonomic design is much lighter and easier to work with, providing greater maneuverability and quick install setup
  • 0-50 psid and 0-200 psid
  • 1/4" male NPT (2 of each range)
  • Wireless sensors

Overview


The Dwyer Wireless Hydronic Balancing Kit 490W was the silver award winner of The Air Conditioning Heating & Refrigeration News magazine (The ACHR News) 2018 Dealer Design Award in the Electronic and Hand Tools Category.  In 2019 the Wireless Hydronic Balancing Kit was also recognized for excellence in product design in the annual Dealer Design Awards Program sponsored by The ACHR News.
 
Balancing plays a critical role in the performance of any hydronic heating and cooling system. The Dwyer 490W pressure sensors communicate via Bluetooth to a mobile device to monitor differential pressure and flow on up to three different valves allowing a single service technician to monitor and balance a hydronic system in less time than traditional methods. The 490W Dwyer Hydronic application software contains valve charts for numerous manufacturers, reads the flow directly in the app, and calculates the pressure in minutes.  Users can select valves for measurements from a predetermined list or through the manual input of CV values.

The advantages for using a wireless hydronic balancing kit is that it is lightweight and easy to work with, eliminates cumbersome hoses or bleed buckets, better efficiency by reading flow directly in the app, and by being able to view several valves at one time. In addition, when the transducers need to be calibrated, by purchasing an extra set there is no down time when one set is sent in for calibration. 

The kit also includes a rugged carrying case and the handheld device is protected by and OtterBox case.

What’s in the Box?


  • Handheld test instrument with Dwyer Hydronic App preloaded onto device 
  • Pressure transducers (4 per kit) with case
  • 1/4" SAE 45° x 1/4" Male NPT straight adapter (2 per kit)
  • 1/4" Female elbow x 1/4" Male NPT fitting (2 per kit)
  • Piercing gauge adapters [2 per size] (6 per kit)
  •  ––1/8" DIA x 1-1/2" length
  •  ––1/8" DIA x 3" length
  •  ––1/16" x 1-1/2" length
  • 490W fabric carrying case
  • Piercing gauge adapters and fittings case (2 per kit)
  • Charger cable and power adapter for handheld test instrument
  • Installation and operating manual

Related Items

Alnor AXD620 Digital Handheld High-Accuracy Micromanometer
(5)
$819.00
In Stock. Free Shipping.
Extech HD350 Digital Differential Manometer and Pitot Tube Anemometer
(2)
$475.00 $409.99 Sale
In Stock. Free Shipping.
Supco DDM55 Digital Differential Pressure Manometer
(0)
$115.50 $91.19 Sale
In Stock.

Recently Viewed Items

TOP