Fluke Fp FoodPro Thermometer for Food Safety is designed to notify the user of safe or unsafe food temperatures. The Fluke Fp FoodPro features an infrared measuring range from -35 to 275 degrees C, LED lights to indicate safe/unsafe food temperatures (Green/Red), and targeting LED lights to indicate exactly where you are aiming.
- Infrared measuring range: -35 to 275 degrees C
- LED lights indicate safe/unsafe food temperatures (Green/Red)
- Target you are measuring is highlighted via LED illumination
- Unit can be washed (IP54 rated)
Specifications: | Fluke Fp FoodPro Food Safety Thermometer |
-30 degrees C to 200 degrees C | |
Accuracy | (Assumes ambient operating temperature of 23 degrees C ±2 degrees) |
Between 0 degrees C and 65 degrees C: ±1 degrees C | |
Below 0 degrees C : ±1 degrees ±0.1 degree/degree | |
Above 65 degrees C): ±1.5 percent of reading | |
Response time | <500 ms after initial reading |
Spectral Response | 8-14 microns |
Emissivity | Pre-set for foodservice applications |
Distance to spot size/Optical Resolution (D:S) | 2.5:1 at 90 percent energy, typical |
Typical working range (target illumination) | 25 mm to 250 mm |
Minimum target size | 12 mm |
Illumination to IR channel offset | 13 mm |
Operational Specifications | Repeatability Within accuracy specifications of the unit |
Ambient operating range | 0 degrees C to 50 degrees C |
Relative Humidity | 90 percent (+/- 5 percent) RH non condensing at 30 degrees C |
Storage Temperature | -20 degrees C to 60 degrees C |
Weight | 100 g (with battery) |
Dimensions | 150 mm x 30 mm x50 mm |
Power, battery life | 1 AA alkaline |
Battery Life alkaline | 10 hours minimum at 23 degrees C |
Target illumination | High Brightness LED |
Display Resolution | 4 digits, 0.2 degrees C |
Displayhold (7seconds) | yes |
LCD backlit display | no |
Temperature display | 4 digits, 0.2 degrees C resolution |
Maximum temperature displayed | no |
Timer | no |
Environmental Data | IP54 sealing (hand-washable, non-submersible) |
Other Specifications | |
Standards | Conforms to EN 61236-1 Electromagnetic Emissions and Susceptibility, EN 6101-1 General Safety, Sealing IP54 (hand washable, non-submersible) |
Certifications | CE NSF |
Warranty | 2 years |
At calibration geometry of 279 mm with a 140 mm diameter, 0.97 emissivity blackbody | |
Specifications subject to change without notice |
Proposition 65 Warning for California Residents: This product can expose you to chemicals including Benzene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Applications: | Fluke Fp FoodPro Food Safety Thermometer |
Receiving: | Use FoodPro Series thermometers to quickly verify proper temperatures of food products at the point of delivery as recommended by your HACCP program |
Food holding: | Easily monitor hot and cold food holding |
Inspection: | Conduct food line inspections daily to ensure compliance with local food temperature monitoring requirements |
Equipment Calibration: | Verify proper operating temperature of coolers, freezers, grills, fryers, warmers, as well as hot and cold storage units to avoid inconsistent food service, costly spoilage and to allow quicker response, reducing equipment repair costs |
Dining room: | Easily verify temperatures in every aspect of food serving to ensure safety, enhance quality and reduce waste |