Fluke Ti450 Infrared Camera with MultiSharp Focus System is a highly-advanced thermal imager that provides cutting-edge MultiSharp auto-focusing technology to prevent costly misdiagnoses due to poorly focused images. The Fluke Ti450's MultiSharp focus automatically combines multiple images to give crystal clear focus for accurate point-and-shoot testing even if starting from a blurry target. Additionally, the Ti450 offers excellent resolution at 320 x 240 (76,800 pixels) - with SuperResolution in-software to increase resolution to 640 x 480 (307,200), precise 50mK thermal sensitivity, super-fast 60Hz refresh rate, and a powerful 753:1 distance to spot ratio. The Ti450 also has a built-in laser distance meter for even sharper focus, syncs wirelessly to FlukeConnect software, and can record and stream radiometric video.
- Fluke Ti450 Infrared Camera with MultiSharp Focus System
- MultiSharp focus system automatically compiles multiple near and far focused images
for crystal clear point-and-shoot focusing - LaserSharp autofocus uses a laser distance meter for razor-sharp focus on selected
target and display onscreen of distance to target - SuperResolution technology provides 4x resolution (640x480) by capturing and combining
multiple thermal images - Fluke Connect compatible for easy and fast on-the-job reporting
- Fluke exclusive IR-Fusion mode and Picture-in-Picture
- Radiometric video recording, video streaming, and remote control capability
- Optional interchangeable smart lenses – 2x and 4x telephoto and wide angle – can
be used without re-calibration - Includes:
- Thermal imager with standard infrared lens, AC power supply and battery pack charger
(including universal AC adapters), Two rugged lithium ion smart battery packs, USB cable,
HDMI video cable, 4 GB micro SD card, Rugged hard carrying case, Soft transport bag,
Adjustable hand strap
Specifications: | Fluke Ti450 Infrared Camera with MultiSharp Focus System | |
IFOV with standard lens (spatial resolution) | 1.31 mRad, D:S 753:1 | |
Detector resolution | 320 x 240 (76,800 pixels) — or 640 x 480 with SuperResolution | |
SuperResolution | Yes, on camera and in software. Captures and combines 4x the data to create a 640 x 480 image | |
MultiSharp Focus | Yes, focused near and far, throughout the field of view | |
LaserSharp Auto Focus | Yes, for consistently in-focus images. Every. Single. Time. | |
Laser distance meter | Yes, calculates distance to the target for precisely focused images and displays distance on screen | |
Advanced manual focus | Yes | |
Ruggedized touchscreen display | 3.5 inch (landscape) 640 x 480 LCD | |
Rugged, ergonomic design for one-handed use | Yes | |
Digital zoom | 2x and 4 | |
Temperature measurement | ||
Temperature measurement range (not calibrated below -10 °C) | -20 °C to +1200 °C (-4 °F to +2192 °F) | |
Accuracy | ±2 °C or 2% (at 25 °C nominal, whichever is greater) | |
Thermal sensitivity (NETD) | =0.05 °C at 30 °C target temp (50 mK) | |
Filter mode (NETD improvement) | =0.03 °C at 30 °C target temp (30 mK) | |
On-screen emissivity correction | Yes (both value and table) | |
On-screen reflected background temperature compensation | Yes | |
On-screen transmission correction | Yes | |
Wireless connectivity | ||
To PC, iPhone® and iPad® (iOS 4s and later), Android™ 4.3 and up, and WiFi to LAN (where available) | ||
Fluke Connect app compatible | Yes, connect your camera to your smartphone, and images taken automatically upload to the Fluke Connect® app for saving and sharing | |
Fluke Connect® Assets optional software | Yes, assign images to assets and create work orders. Easily compare measurement types - whether mechanical, electrical or infrared images - in one location. | |
Fluke Connect® Instant Upload | Yes, connect your camera to your building's WiFi network, and images taken automatically upload to the Fluke Connect® system for viewing on your smartphone or PC | |
Fluke Connect® tool compatible | Yes, connects wirelessly to select Fluke Connect® enabled tools and displays measurements on camera screen. Five simultaneous connections supported. | |
IR-Fusion® technology | ||
Adds the context of the visible details to your infrared image | ||
AutoBlend™ mode | Min, Mid, Max IR plus full visible on camera; continously variable in software | |
Picture-In-Picture (PIP) | Yes | |
Built-in digital camera (visible light) | 5 MP | |
Lenses | ||
Standard lens | IFOV (spatial resolution) | 1.31 mRad, D:S 753:1 |
Field of view | 24 °H x 17 °V | |
Minimum focus distance | 15 cm (approx. 6 in) | |
IR-Fusion® technology | Picture-in-picture and full screen | |
Optional 2x telephoto smart lens | IFOV | 0.65 mRad, D:S 1529:1 |
Field of view | 12 °H x 9 °V | |
Minimum focus distance | 45 cm (approx. 18 in) | |
IR-Fusion® technology | Picture-in-picture and full screen | |
Optional 4x telephoto smart lens | IFOV | 0.33 mRad, D:S 2941:1 |
Field of view | 6.0 °H x 4.5 °V | |
Minimum focus distance | 1.5 m (approx. 5 ft) | |
IR-Fusion® technology | Picture-in-picture and full screen | |
Optional wide-angle smart lens | IFOV | 2.62 mRad, D:S 377:1 |
Field of view | 46 °H x 34 °V | |
Minimum focus distance | 15 cm (approx. 6 in) | |
IR-Fusion® technology | Full screen | |
Level and span | ||
Smooth auto and manual scaling | ||
Fast auto toggle between manual and auto modes | Yes | |
Fast auto-rescale in manual mode | Yes | |
Minimum span (in manual mode | 2.0 °C (3.6 °F) | |
Minimum span (in auto mode | 3.0 °C (5.4 °F) | |
Data storage and image capture | ||
Extensive memory options | Removable 4 GB micro SD memory card, 4 GB internal flash memory, save to USB flash drive capability, upload to Fluke Cloud™ for permanent storage | |
Image capture, review, save mechanism | One-handed image capture,review, and save capability | |
Image file formats | Non-radiometric (.bmp) or (.jpeg) or fully-radiometric (.is2); no analysis software required for non-radiometric (.bmp, .jpg and .avi) files | |
Memory review | Thumbnail and fullscreen review | |
Software | SmartView® software - full analysis and reporting software and Fluke Connect® system | |
Export file formats with SmartView® software | Bitmap (.bmp), GIF, JPEG, PNG, TIFF | |
Voice annotation | 60 seconds maximum recording time per image; reviewable playback on camera, optional bluetooth headset available but not required | |
IR-PhotoNotes™ | Yes (5 images) | |
Text annotation | Yes | |
Video recording | Standard and radiometric | |
File formats video | Non-radiometric (MPEG - encoded .AVI) and fully-radiometric (.IS3) | |
Streaming video (remote display) | Yes, see the live stream of the camera display on your PC, smartphone, or TV monitor. Via USB, WiFi hotspot, or WiFi network to SmartView® software on a PC; via WiFi hotspot to the Fluke Connect® app on a smartphone; or via HDMI to a TV monitor | |
Remote control operation | Yes, through SmartView® software or Fluke Connect® mobile app | |
Auto capture (temperature and interval) | Yes | |
Battery | ||
Batteries (field-replaceable, rechargeable) | Two lithium ion smart battery packs with five-segment LED display to show charge level | |
Battery life | 3-4 hours per battery (*Actual life varies depending on settings and usage) | |
Battery charge time | 2.5 hours to full charge | |
Battery charging system | Two-bay battery charger or in-imager charging. Optional 12 V automotive charging adapter | |
AC operation | AC operation with included power supply (100 V AC to 240 V AC, 50/60 Hz) | |
Power saving | User selectable sleep and power off modes | |
Color palettes | ||
Standard palettes | 8: Ironbow, Blue-Red, High Contrast, Amber, Amber Inverted, Hot Metal, Grayscale, Grayscale Inverted | |
Ultra Contrast™ palettes | 8: Ironbow Ultra, Blue-Red Ultra, High Contrast Ultra, Amber Ultra, Amber Inverted Ultra, Hot Metal Ultra, Grayscale Ultra, Grayscale Inverted Ultra | |
General specifications | ||
Frame rate | 60 Hz or 9 Hz versions | |
Laser pointer | Yes | |
LED light (torch) | Yes | |
Color alarms (temperature alarms) | High temperature, low temperature, and isotherms (within range) | |
Center-point temperature measurement | Yes | |
Spot temperature | Hot and cold spot markers | |
User-definable spot markers | 3 user-definable spot markers | |
Center box | Expandable-contractible measurement box with MIN-MAX-AVG temp display | |
Infrared spectral band | 7.5 µm to 14 µm (long wave) | |
Operating temperature | -10 °C to +50 °C (14 °F to 122 °F) | |
Storage temperature | -20 °C to +50 °C (-4 °F to 122 °F) without batteries | |
Relative humidity | 10% to 95% non-condensing | |
Safety | IEC 61010-1: Overvoltage category II, Pollution Degree 2 | |
Electromagnetic compatibility | IEC 61326-1: Basic EM environment. CISPR 11: Group 1, Class A | |
Australian RCM | IEC 61326-1 | |
US FCC | CFR 47, Part 15 Subpart B | |
Vibration | 0.03 g2/Hz (3.8 g), 2.5 g IEC 68-2-6 | |
Shock | 25 g, IEC 68-2-29 | |
Drop | Engineered to withstand 2 meter (6.5 feet) drop with standard lens | |
Size (H x W x L) | 27.7 x 12.2 x 16.7 cm (10.9 x 4.8 x 6.5 in) | |
Weight (battery included) | 1.04 kg (2.3 lb) | |
Enclosure rating | EC 60529: IP54 (protected against dust, limited ingress; protection against water spray from all directions) | |
Warranty | Two-years (standard), extended warranties are available | |
Recommended calibration cycl |
Applications: | Fluke Ti450 Infrared Camera with MultiSharp Focus System |
Industrial / Electrical Equipment, including, but not limited to: Motors, Pumps, Compressors, Bearings, Rollers, etc. | |
Electrical Service: Transformers, Fuse Panels, Control Centers, Circuit Breakers, Transmission lines, etc. | |
Process systems: tanks and vessels, reactors, refractory insulation, etc. | |
HVAC/R: Insulation, Air Handlers, Compressors, Moisture |