1. Home
  2. Brands
  3. MRU Instruments
  4. MRU Ampro 2000 Combustion Emission Analyzer
MRU Ampro 2000 Combustion Emission Analyzer
MRU AMPRO 2000 Combustion Analyzer

MRU Ampro 2000 Combustion Emission Analyzer

Part Number: 410134-01
0 Review(s)
MRU AMPRO 2000 Combustion Emission Analyzer

The MRU AMPRO 2000 is a powerful, handheld, industrial combustion and emission analyzer that can be equipped with up to 5 electrochemical sensors and a single or dual gas IR-bench (sensor)  to simultaneously measure up to 7 gases including O2, CO, NO, NO2, SO2  as well as CO-high, and CO-very high. In addition, the Ampro 2000 can measure combustion air temperature, stack gas temperature, stack draft, differential pressure, and differential temperature. The industrial combustion analyzer can also calculate CO/CO2 ratio, dew point, excess air and air ratio, combustion efficiency, and heat loss.

Key Features
  • Simultaneously measure up to 7 gases
  • Emission calculations such as mass flow
  • Calculated or true NO(x) measurement 
  • O2 referencing to user defined values
  • Gas temperature measurement up to 2012° F using the Inconel Tube and 1200° F using the stainless steel probe
  • Air purging pump for CO-sensor protection (not possible with NDIR)
  • Internal data Storage for up to 16,000 data sets
  • Large color graphic, backlit display with zoom feature
  • Customizable screen settings
  • IR, SD Card, USB, and optional Bluetooth outputs

Overview

Accurate combustion analysis is an important tool for the proper operation and maintenance of any combustion process to provide the highest combustion efficiency.  In the combustion process, additional chemicals are formed such as CO, NO, NO2, SO2, soot and ash which can be harmful to the environment. Monitoring these emissions to provide the highest combustion efficiency provide a variety of benefits such as lower fuel cost, less pollutants being emitted into the atmosphere, and identifying and preventing maintenance problems of the equipment.

The MRU 2000 industrial analyzer can be used with over 20 different fuels types as well as configured with up to 7 different sensors, and probes to provide the most accurate diagnostic information for commercial and industrial applications. In addition, the gas analyzer has true NOx measurement plus O2 referencing to provide the most accurate information for tuning.
 
Additional features for the handheld gas analyzer include ability to measure gas temperature up to 2012° F using the Inconel tubes and up to 1200° F using the stainless steel probe.

The AMPRO gas analyzer features a large integrated condensate trap with a Teflon coated filter and back-light. The combustion analyzer has internal storage for up to 16,000 data sets and integrated SD Card reader for additional data storage and data transfer to a PC.  It also comes with an IR interface for an external printer which is an optional purchase.

The AMPRO 2000 super bright, color, 3.5” LCD display with a backlight and zooming capabilities allows easy viewing of your data. The analyzer is slim, lightweight, and easy to use with menu guided software and function keys. Magnets on the back provide hands free operation.

The Li-Ion rechargeable battery has up to 15 hours operation time under regular operating conditions and approximately 6 hours with NDIR sensor.

What's in the Box?

  • AMPRO 2000
  • High capacity lithium-ion battery
  • 100 to 240V battery charger
  • USB cable
  • 4GB SD card
On Sale: $2,519.40
Retail Price:$2,652.00
You Save:$132.60(5%)
Availability: Usually Ships in 3 to 5 Days

Choose Options

*
Write a Review Request a Quote
Authorized Distributor

MRU AMPRO 2000 Combustion Emission Analyzer


The MRU AMPRO 2000 is a powerful, handheld, industrial combustion and emission analyzer that can be outfitted to simultaneously measure up to 6 gases including O2, CO, CO2, NO, NO2, SO2  as well as CO-high, and CO-very high. In addition, the Ampro 2000 can measure combustion air temperature, stack gas temperature, stack draft, differential pressure, and differential temperature. The industrial combustion analyzer can also calculate CO/CO2 ratio, dew point, excess air and air ratio, combustion efficiency, and heat loss.  Kit 1 includes Ampro 200O analyzer with O2 / CO sensors and and will calculate CO2, industrial probe with 9' sampling line and 12" exchangeable probe tube, and carrying case. 

Key Features

  • Simultaneously measure up to 6 gases
  • Long Life O2 sensor 
  • CO (H2 compensated) sensor
  • Combustion and Emission calculations
  • Flue gas and ambient air temperature measurement
  • O2 referencing to user defined values
  • Differential temperature measurement
  • Analyzer and probe leak test
  • Measure stack temperatures up to 1200°F; upgradeable to 2000°F
  • Air purging pump for CO-sensor protection 
  • Large fuel type list plus user definable fuel types
  • Internal data Storage for up to 16,000 data sets
  • Large color graphic, backlit display with zoom feature
  • Customizable screen settings
  • IR, SD Card, USB, and optional Bluetooth outputs

Overview


Accurate combustion analysis is an important tool for the proper operation and maintenance of any combustion process to provide the highest combustion efficiency.  In the combustion process, additional chemicals are formed such as CO, NO, NO2, SO2, soot and ash which can be harmful to the environment. Monitoring these emissions to provide the highest combustion efficiency provide a variety of benefits such as lower fuel cost, less pollutants being emitted into the atmosphere, and identifying and preventing maintenance problems of the equipment.

The MRU 2000 industrial analyzer can be used with over 20 different fuels types as well as configured with up to 6 different sensors, and probes to provide the most accurate diagnostic information for commercial and industrial applications. In addition, the gas analyzer has true NOx measurement plus O2 referencing to provide the most accurate information for tuning.
 
In addition, for high temperature applications (up to 2000° F) the probe can be upgraded to an Inconel tube. Call for details.

The AMPRO gas analyzer features a large integrated condensate trap with a Teflon coated filter and back-light. The combustion analyzer has internal storage for up to 16,000 data sets and integrated SD Card reader for additional data storage and data transfer to a PC.  It also comes with an IR interface for an external printer which is an optional purchase.

The AMPRO 2000 super bright, color, 3.5” LCD display with a backlight and zooming capabilities allows easy viewing of your data. The analyzer is slim, lightweight, and easy to use with menu guided software and function keys. Magnets on the back provide hands free operation.

The Li-Ion rechargeable battery has up to 15 hours operation time under regular operating conditions and approximately 6 hours with NDIR sensor.

The Ampro 2000 has different kits available depending on your needs.


Kit 1 includes:
  • Ampro 2000
  • O2 / CO and CO2 (calculated CO2)
  • Industrial probe with 9’ sampling line and 12” exchangeable probe tube
  • Carrying case

Kit 2 includes:
  • Ampro 2000
  • O2 / CO and CO2 (calculated CO2)
  • Industrial probe with 9’ sampling line and 12” exchangeable probe tube
  • Carrying case
  • IR printer

Kit 3 includes:
  • Ampro 2000
  • O2 / CO and CO2 (calculated CO2)
  • NO sensor (0 – 1,000ppm / 5000ppm) calculated NOx
  • Industrial probe with 9’ sampling line and 12” exchangeable probe tube
  • Carrying case

Kit 4 includes:
  • Ampro 2000
  • O2 / CO and CO2 (calculated CO2)
  • NO sensor (0 – 1,000ppm / 5000ppm) calculated NOx
  • Industrial probe with 9’ sampling line and 12” exchangeable probe tube
  • Carrying case
  • IR printer

Kit 5 includes:
  • Ampro 2000
  • O2 / CO and CO2 (calculated CO2)
  • NO sensor (measurement 0 – 1,000ppm / 5000ppm) 
  • NO2 sensor (measurement 0 to 200ppm / 1,000ppm) TRUE NOx
  • Carrying case

Kit 6 includes:
  • Ampro 2000
  • O2 / CO and CO2 (calculated CO2)
  • NO sensor (measurement 0 – 1,000ppm / 5000ppm) 
  • NO2 sensor (measurement 0 to 200ppm / 1,000ppm) TRUE NOx
  • Carrying case
  • IR printer


What's in the Box?


  • AMPRO 2000
  • Industrial probe handle with 9' hose
  • Exchangeable 12" probe tube
  • Carrying case
  • High capacity lithium-ion battery
  • 100 to 240V battery charger
  • USB cable
  • 4GB SD card
  • Two-year warranty

Related Items

Recently Viewed Items

TOP