Sitting flush against the surface it measures, this flush mount temperature sensor uses a high-accuracy 10,000 ohm Type II thermistor on a flying lead, so the sensing button can be recessed into a wall, a duct liner or a machine housing while the wiring stays accessible. The low profile suits museums, archives and finished spaces where a standard enclosure would be intrusive.
Sitting flush against the surface it measures, this flush mount temperature sensor uses a high-accuracy 10,000 ohm Type II thermistor on a flying lead, so the sensing button can be recessed into a wall, a duct liner or a machine housing while the wiring stays accessible. The low profile suits museums, archives and finished spaces where a standard enclosure would be intrusive.
The ACI Thermistor Flush Mount Button Sensors Series features a stainless steel, brass or white plastic button sensor with two, 24 inch 22 AWG Etched Teflon colored lead wires to differentiate the different sensor types. The sensors in this series are manufactured using ACI's proven encapsulation process to eliminate the effects of moisture upon the sensors and to increase the response times using our high quality, thermally conductive epoxy. This sensor uses a small, low profile design, and should be used in applications where aesthetics is your primary concern. Each unit is supplied with a mounting kit such that they can be hidden underneath cabinets or shelving units, in decorative metal plates, trim, drywall or from a 1/2" piece of conduit coming down from the ceiling or roof.
Features
Applications
| Power Dissipation Constant | 3 mW/°C |
| Sensor Type | Sensor Curve | Thermistor | Non-Linear, NTC (Negative Temperature Coefficient) |
| Lead Length | Conductor Size | 24" (61cm) | 22 AWG (0.65mm) |
| Number Sensing Points | Number Wires | One | Two (Non-Polarity Sensitive) |
| Operating Humidity Range | 10 to 95% RH, non-condensing |
| Conductor Material | Silver Plated Copper |
| Plastic Button Flammability Rating | UL94-HB |
| Product Weight | 0.03 lbs (14 g) |
| Power Dissipation Constant | 3 mW/°C |
| Sensor Type | Sensor Curve | Thermistor | Non-Linear, NTC (Negative Temperature Coefficient) |
| Lead Length | Conductor Size | 24" (61cm) | 22 AWG (0.65mm) |
| Number Sensing Points | Number Wires | One | Two (Non-Polarity Sensitive) |
| Operating Humidity Range | 10 to 95% RH, non-condensing |
| Conductor Material | Silver Plated Copper |
| Plastic Button Flammability Rating | UL94-HB |
| Product Weight | 0.03 lbs (14 g) |
