Finishing a room sensor installation where a plain cover is preferred, this wall plate temperature sensor carries a 10,000 ohm Type II thermistor behind a brushed 304 stainless steel plate that fits a standard single-gang box. The exposed face resists scuffing in corridors and lobbies where a plastic enclosure would show wear.
Finishing a room sensor installation where a plain cover is preferred, this wall plate temperature sensor carries a 10,000 ohm Type II thermistor behind a brushed 304 stainless steel plate that fits a standard single-gang box. The exposed face resists scuffing in corridors and lobbies where a plastic enclosure would show wear.
The ACI Thermistor Wall Plate Series features a decorative, single gang brushed Stainless Steel or Smooth Satin Finished Anodized Aluminum wall plate with two, 14 inch 22 AWG Etched Teflon colored lead wires to differentiate the different NTC sensor types. The sensors in this series are manufactured using ACI's proven double encapsulation process to eliminate the effects of moisture upon the sensors and to increase the thermal response times using our high quality, Stainless Steel thermally conductive epoxy. A foam pad is included to insulate the sensor from thermal drafts within the wall, since they are designed to be mounted over a standard single gang junction box Aluminum or directly over a hole in the wall with the use of drywall anchors to monitor ambient air temperatures in a space. Tamper Proof mounting screws are available upon request.
Features
Applications
| Power Dissipation Constant | 3 mW/°C |
| Sensor Type | Sensor Curve | Thermistor | Non-Linear, NTC (Negative Temperature Coefficient) |
| Lead Length | Conductor Size | 14" (35.56cm) | 22 AWG (0.65mm) |
| Lead Wire Insulation | Wire Rating | Etched Teflon (PTFE) Colored Leads | MIL-W-16878/4 (Type E) |
| Number Sensing Points | One |
| Number Wires | Two (Non-Polarity Sensitive) |
| Operating Humidity Range | 10 to 95% RH, non-condensing |
| Operating | Storage Temperature Range | -40 to 71°C (-40 to160°F) | -40 to 71°C (-40 to 160°F) |
| Conductor Material | Silver Plated Copper |
| Foam Material | Flammability Rating | Cross-Linked Polyethylene | FMVSS-302 |
| Product Dimensions (L x W x H) | 4.50 x 2.75 x 0.45" (114.3 x 69.8 x 11.4 mm) |
| Product Weight | 0.14 lbs (63 g) |
| Power Dissipation Constant | 3 mW/°C |
| Sensor Type | Sensor Curve | Thermistor | Non-Linear, NTC (Negative Temperature Coefficient) |
| Lead Length | Conductor Size | 14" (35.56cm) | 22 AWG (0.65mm) |
| Lead Wire Insulation | Wire Rating | Etched Teflon (PTFE) Colored Leads | MIL-W-16878/4 (Type E) |
| Number Sensing Points | One |
| Number Wires | Two (Non-Polarity Sensitive) |
| Operating Humidity Range | 10 to 95% RH, non-condensing |
| Operating | Storage Temperature Range | -40 to 71°C (-40 to160°F) | -40 to 71°C (-40 to 160°F) |
| Conductor Material | Silver Plated Copper |
| Foam Material | Flammability Rating | Cross-Linked Polyethylene | FMVSS-302 |
| Product Dimensions (L x W x H) | 4.50 x 2.75 x 0.45" (114.3 x 69.8 x 11.4 mm) |
| Product Weight | 0.14 lbs (63 g) |
