Additel ADT875PC-155-E-110V Dry Well Calibrator with Process Calibrator, -40 to 155°C, insert E, 110V

Model: ADT875PC-155-E-110V

Additel ADT875PC-155-E-110V Dry Well Calibrator with Process Calibrator, -40 to 155°C, insert E, 110V-

Downloads: datasheet manual

More Additel Products

Ask an Expert

Additel ADT875PC-155-E-110V Dry Well Calibrator with Process Calibrator, -40 to 155°C, insert E, 110V

Model: ADT875PC-155-E-110V

Bringing a repeatable temperature source to the plant floor, this dry well calibrator spans -40 to 155°C, holds ±0.18°C across the full range, and reaches 155°C in 13 minutes. Insert E sets the hole pattern in the well. Process electronics read a reference probe and two devices under test, drive HART transmitters and log results as found and as left.

Bringing a repeatable temperature source to the plant floor, this dry well calibrator spans -40 to 155°C, holds ±0.18°C across the full range, and reaches 155°C in 13 minutes. Insert E sets the hole pattern in the well. Process electronics read a reference probe and two devices under test, drive HART transmitters and log results as found and as left.

Your Price $13488.00 USD
Availability 2 to 3 Weeks
Quantity

Additel ADT875PC-155-E-110V Offers

Features

  • Interchangeable metal insert sets the hole pattern, so one well serves many sensor diameters
  • Removable insert lifts out with the supplied tool while the well is still warm
  • 6.5" color touch screen drives set point, auto step, ramp and soak without a PC
  • Reaches 155°C in 13 minutes
  • USB, Ethernet, Wi-Fi and Bluetooth allow remote control and data download
  • Eight display languages including English, French and Spanish
  • Process Calibrator option adds an external reference PRT input plus two measurement channels for devices under test
  • Channels read mA, voltage, switch, RTD and thermocouple, so the sensor and its transmitter are calibrated in one pass
  • HART communication reads, configures and calibrates HART transmitters
  • 24 V loop power drives a two-wire transmitter without a separate supply
  • Documented tasks store up to 1000 procedures with as-found and as-left results
  • Control the set point from the external reference instead of the internal sensor for the tightest achievable accuracy

Applications

  • Plant technicians carrying a temperature source to the instrument rather than pulling the instrument to the shop
  • Instrument technicians verifying process temperature transmitters on site
  • Calibration laboratories issuing accredited temperature certificates
  • Maintenance teams meeting scheduled recalibration intervals
  • Oil, gas and chemical facilities checking RTDs and thermocouples in the field

Additel ADT875PC-155-E-110V Specifications

Temperature Performance
Temperature Range at 23°C -40 to 155°C
Display Accuracy ±0.18°C at full range
Stability ±0.01°C at full range
Axial Uniformity at 60 mm (2.4") ±0.07°C at full range
Radial Uniformity ±0.01°C at full range
Loading Effect ±0.1°C display sensor, ±0.02°C external sensor
Hysteresis 0.025°C (display sensor)
Resolution 0.01°C
Temperature Units °C, °F and K
Heating Time 13 minutes from -40 to 155°C, 5 minutes from -40 to 23°C, 8 minutes from 23 to 155°C
Cooling Time 28 minutes from 155 to -40°C, 8 minutes from 155 to 23°C, 20 minutes from 23 to -40°C
Typical Time to Stability 10 minutes
Well and Insert
Immersion Depth 5.70" (145 mm)
Insert Outside Diameter 1.02" (25.8 mm)
Insert Supplied ADT110-875-L-INSERT-E
Process Calibrator
Reference Probe Input 6-pin Lemo smart connector, 4-wire PRT
Reference Readout Accuracy ±0.009°C at -40°C, ±0.017°C at 155°C, ±0.030°C at 420°C, ±0.042°C at 660°C
Reference Resistance Range 0 to 400 Ω
Reference Resistance Accuracy ±0.002 Ω from 0 to 50 Ω, ±40 ppm of reading from 50 to 400 Ω
Reference Characterizations ITS-90, CVD, IEC-751, resistance
RTD Channels 2, each accepting 2, 3 or 4-wire RTDs
RTD Measurement Accuracy ±0.002 Ω from 0 to 25 Ω, ±0.008% of reading from 25 Ω to 4 kΩ
RTD Characterizations PT10, PT25, PT50, PT100, PT200, PT500, PT1000, CU10, CU50, CU100, NI100, NI120
Thermocouple Channels 2, mini TC terminals accepting S, R, K, B, N, E, J, T, C, D, G, L and U
Thermocouple Accuracy, Type K ±0.13°C at 0°C, ±0.16°C at 155°C, ±0.19°C at 350°C, ±0.25°C at 660°C
Thermocouple Range -75 to 75 mV
Thermocouple Voltage Accuracy 0.02% of reading + 5 µV
Internal Cold Junction Accuracy ±0.35°C from 0 to 50°C ambient
Current Range -30 to 30 mA
Current Accuracy 0.02% of reading + 2 µA
Voltage Ranges -12 to 12 V and -30 to 30 V
Voltage Accuracy ±0.02% of reading + 2 mV
Switch Test Mechanical or electrical
Loop Power Output 24 V ±10%, 60 mA maximum
HART Communication Read, configure and calibrate HART devices
Documentation Up to 1000 tasks storing 10 results each, with as-found and as-left data
General
Display 6.5" (165 mm) color touch screen
Communication USB-A, USB-B, RJ45, Wi-Fi, Bluetooth
Dimensions 12.6 x 6.7 x 13.0" (320 x 170 x 330 mm)
Weight 21.8 lb (9.9 kg)
Power Requirements 90 to 254 V AC, 45 to 65 Hz, 580 W
Environmental Conditions 8 to 38°C for guaranteed accuracy, 0 to 50°C operating, 0% to 90% RH non-condensing, to 3000 m
Storage Conditions -20 to 60°C
Mechanical Testing Vibration 2 g (10 to 500 Hz) for 30 minutes on 2 sides; impact 4 g three times; drop test 19.6" (500 mm)
Click here for complete specifications on the Additel ADT875PC-155-E-110V

What's included with the Additel ADT875PC-155-E-110V

  • Dry Well Calibrator
  • ISO 17025 Accredited Calibration Certificate
  • Insert, 1 selected
  • Insert Removal Tool
  • Silica Gel Plugs, 1 set of 3
  • Insulation Plug
  • Power Cable
  • USB Cable
  • Test Leads, 2 sets of 2
  • One-Year Warranty
datasheet for the Additel ADT875PC-155-E-110V Dry Well Calibrator with Process Calibrator, -40 to 155°C, insert E, 110V manual for the Additel ADT875PC-155-E-110V Dry Well Calibrator with Process Calibrator, -40 to 155°C, insert E, 110V

Click on a category to view a selection of compatible accessories with the Additel ADT875PC-155-E-110V Dry Well Calibrator with Process Calibrator, -40 to 155°C, insert E, 110V.

Additel AM1710-12-ADT Secondary Reference PRT Probe, 12 x 0.25", -40 to 320°F, smart connector AM1710-12-ADT
Built for comparison calibration near ambient, this secondary reference PRT measures from -40 to 320°F and holds ±0.015°C accuracy at the triple point of water. A stainless steel sheath protects the 100 ohm platinum sensor to 160°C along a 12" stem, while the six-pin Lemo smart connector plugs straight into an Additel readout such as the ADT282.



Additel AM1710-BEND-ADT Secondary Reference PRT Probe, 12 x 0.25" with 90° bend, -40 to 320°F, smart connector AM1710-BEND-ADT
Built for comparison calibration near ambient, this secondary reference PRT measures from -40 to 320°F and holds ±0.015°C accuracy at the triple point of water. A stainless steel sheath, bent 90° to clear shallow baths, protects the 100 ohm platinum sensor to 160°C, while the six-pin Lemo smart connector plugs straight into an Additel readout such as the ADT282.



Additel AM1730-12-ADT Secondary Reference PRT Probe, 12 x 0.25", -328 to 788°F, smart connector AM1730-12-ADT
Built for dry-well and fluid-bath calibration, this secondary reference PRT measures from -328 to 788°F and holds ±0.015°C accuracy at the triple point of water. An Inconel sheath protects the 100 ohm platinum sensor to 420°C along a 12" stem, while the six-pin Lemo smart connector plugs straight into an Additel readout such as the ADT282.



Additel AM1730-BEND-ADT Secondary Reference PRT Probe, 12 x 0.25" with 90° bend, -328 to 788°F, smart connector AM1730-BEND-ADT
Built for dry-well and fluid-bath calibration, this secondary reference PRT measures from -328 to 788°F and holds ±0.015°C accuracy at the triple point of water. An Inconel sheath, bent 90° to clear shallow baths, protects the 100 ohm platinum sensor to 420°C, while the six-pin Lemo smart connector plugs straight into an Additel readout such as the ADT282.



Additel AM1751-12-ADT Secondary Reference PRT Probe, 12 x 0.25", -328 to 1238°F, smart connector AM1751-12-ADT
Built for furnace and bath calibration, this secondary reference PRT measures from -328 to 1238°F and holds ±0.015°C accuracy at the triple point of water. An Inconel sheath protects the 100 ohm platinum sensor to 670°C along a 12" stem, while the six-pin Lemo smart connector plugs straight into an Additel readout such as the ADT282.



Additel AM1751-BEND-ADT Secondary Reference PRT Probe, 12 x 0.25" with 90° bend, -328 to 1238°F, smart connector AM1751-BEND-ADT
Built for furnace and bath calibration, this secondary reference PRT measures from -328 to 1238°F and holds ±0.015°C accuracy at the triple point of water. An Inconel sheath, bent 90° to clear shallow baths, protects the 100 ohm platinum sensor to 670°C, while the six-pin Lemo smart connector plugs straight into an Additel readout such as the ADT282.



Ask a question about Additel ADT875PC-155-E-110V Dry Well Calibrator with Process Calibrator, -40 to 155°C, insert E, 110V

Customer Reviews for the Additel ADT875PC-155-E-110V

Additel ADT875PC-155-E-110V Offers

Features

  • Interchangeable metal insert sets the hole pattern, so one well serves many sensor diameters
  • Removable insert lifts out with the supplied tool while the well is still warm
  • 6.5" color touch screen drives set point, auto step, ramp and soak without a PC
  • Reaches 155°C in 13 minutes
  • USB, Ethernet, Wi-Fi and Bluetooth allow remote control and data download
  • Eight display languages including English, French and Spanish
  • Process Calibrator option adds an external reference PRT input plus two measurement channels for devices under test
  • Channels read mA, voltage, switch, RTD and thermocouple, so the sensor and its transmitter are calibrated in one pass
  • HART communication reads, configures and calibrates HART transmitters
  • 24 V loop power drives a two-wire transmitter without a separate supply
  • Documented tasks store up to 1000 procedures with as-found and as-left results
  • Control the set point from the external reference instead of the internal sensor for the tightest achievable accuracy

Applications

  • Plant technicians carrying a temperature source to the instrument rather than pulling the instrument to the shop
  • Instrument technicians verifying process temperature transmitters on site
  • Calibration laboratories issuing accredited temperature certificates
  • Maintenance teams meeting scheduled recalibration intervals
  • Oil, gas and chemical facilities checking RTDs and thermocouples in the field
Show More...

Additel ADT875PC-155-E-110V Specifications

Temperature Performance
Temperature Range at 23°C -40 to 155°C
Display Accuracy ±0.18°C at full range
Stability ±0.01°C at full range
Axial Uniformity at 60 mm (2.4") ±0.07°C at full range
Radial Uniformity ±0.01°C at full range
Loading Effect ±0.1°C display sensor, ±0.02°C external sensor
Hysteresis 0.025°C (display sensor)
Resolution 0.01°C
Temperature Units °C, °F and K
Heating Time 13 minutes from -40 to 155°C, 5 minutes from -40 to 23°C, 8 minutes from 23 to 155°C
Cooling Time 28 minutes from 155 to -40°C, 8 minutes from 155 to 23°C, 20 minutes from 23 to -40°C
Typical Time to Stability 10 minutes
Well and Insert
Immersion Depth 5.70" (145 mm)
Insert Outside Diameter 1.02" (25.8 mm)
Insert Supplied ADT110-875-L-INSERT-E
Process Calibrator
Reference Probe Input 6-pin Lemo smart connector, 4-wire PRT
Reference Readout Accuracy ±0.009°C at -40°C, ±0.017°C at 155°C, ±0.030°C at 420°C, ±0.042°C at 660°C
Reference Resistance Range 0 to 400 Ω
Reference Resistance Accuracy ±0.002 Ω from 0 to 50 Ω, ±40 ppm of reading from 50 to 400 Ω
Reference Characterizations ITS-90, CVD, IEC-751, resistance
RTD Channels 2, each accepting 2, 3 or 4-wire RTDs
RTD Measurement Accuracy ±0.002 Ω from 0 to 25 Ω, ±0.008% of reading from 25 Ω to 4 kΩ
RTD Characterizations PT10, PT25, PT50, PT100, PT200, PT500, PT1000, CU10, CU50, CU100, NI100, NI120
Thermocouple Channels 2, mini TC terminals accepting S, R, K, B, N, E, J, T, C, D, G, L and U
Thermocouple Accuracy, Type K ±0.13°C at 0°C, ±0.16°C at 155°C, ±0.19°C at 350°C, ±0.25°C at 660°C
Thermocouple Range -75 to 75 mV
Thermocouple Voltage Accuracy 0.02% of reading + 5 µV
Internal Cold Junction Accuracy ±0.35°C from 0 to 50°C ambient
Current Range -30 to 30 mA
Current Accuracy 0.02% of reading + 2 µA
Voltage Ranges -12 to 12 V and -30 to 30 V
Voltage Accuracy ±0.02% of reading + 2 mV
Switch Test Mechanical or electrical
Loop Power Output 24 V ±10%, 60 mA maximum
HART Communication Read, configure and calibrate HART devices
Documentation Up to 1000 tasks storing 10 results each, with as-found and as-left data
General
Display 6.5" (165 mm) color touch screen
Communication USB-A, USB-B, RJ45, Wi-Fi, Bluetooth
Dimensions 12.6 x 6.7 x 13.0" (320 x 170 x 330 mm)
Weight 21.8 lb (9.9 kg)
Power Requirements 90 to 254 V AC, 45 to 65 Hz, 580 W
Environmental Conditions 8 to 38°C for guaranteed accuracy, 0 to 50°C operating, 0% to 90% RH non-condensing, to 3000 m
Storage Conditions -20 to 60°C
Mechanical Testing Vibration 2 g (10 to 500 Hz) for 30 minutes on 2 sides; impact 4 g three times; drop test 19.6" (500 mm)
Click here for complete specifications on the Additel ADT875PC-155-E-110V

What's included with the Additel ADT875PC-155-E-110V

  • Dry Well Calibrator
  • ISO 17025 Accredited Calibration Certificate
  • Insert, 1 selected
  • Insert Removal Tool
  • Silica Gel Plugs, 1 set of 3
  • Insulation Plug
  • Power Cable
  • USB Cable
  • Test Leads, 2 sets of 2
  • One-Year Warranty
datasheet for the Additel ADT875PC-155-E-110V Dry Well Calibrator with Process Calibrator, -40 to 155°C, insert E, 110V manual for the Additel ADT875PC-155-E-110V Dry Well Calibrator with Process Calibrator, -40 to 155°C, insert E, 110V

Click on a category to view a selection of compatible accessories with the Additel ADT875PC-155-E-110V Dry Well Calibrator with Process Calibrator, -40 to 155°C, insert E, 110V.

Additel AM1710-12-ADT Secondary Reference PRT Probe, 12 x 0.25", -40 to 320°F, smart connector AM1710-12-ADT
Built for comparison calibration near ambient, this secondary reference PRT measures from -40 to 320°F and holds ±0.015°C accuracy at the triple point of water. A stainless steel sheath protects the 100 ohm platinum sensor to 160°C along a 12" stem, while the six-pin Lemo smart connector plugs straight into an Additel readout such as the ADT282.



Additel AM1710-BEND-ADT Secondary Reference PRT Probe, 12 x 0.25" with 90° bend, -40 to 320°F, smart connector AM1710-BEND-ADT
Built for comparison calibration near ambient, this secondary reference PRT measures from -40 to 320°F and holds ±0.015°C accuracy at the triple point of water. A stainless steel sheath, bent 90° to clear shallow baths, protects the 100 ohm platinum sensor to 160°C, while the six-pin Lemo smart connector plugs straight into an Additel readout such as the ADT282.



Additel AM1730-12-ADT Secondary Reference PRT Probe, 12 x 0.25", -328 to 788°F, smart connector AM1730-12-ADT
Built for dry-well and fluid-bath calibration, this secondary reference PRT measures from -328 to 788°F and holds ±0.015°C accuracy at the triple point of water. An Inconel sheath protects the 100 ohm platinum sensor to 420°C along a 12" stem, while the six-pin Lemo smart connector plugs straight into an Additel readout such as the ADT282.



Additel AM1730-BEND-ADT Secondary Reference PRT Probe, 12 x 0.25" with 90° bend, -328 to 788°F, smart connector AM1730-BEND-ADT
Built for dry-well and fluid-bath calibration, this secondary reference PRT measures from -328 to 788°F and holds ±0.015°C accuracy at the triple point of water. An Inconel sheath, bent 90° to clear shallow baths, protects the 100 ohm platinum sensor to 420°C, while the six-pin Lemo smart connector plugs straight into an Additel readout such as the ADT282.



Additel AM1751-12-ADT Secondary Reference PRT Probe, 12 x 0.25", -328 to 1238°F, smart connector AM1751-12-ADT
Built for furnace and bath calibration, this secondary reference PRT measures from -328 to 1238°F and holds ±0.015°C accuracy at the triple point of water. An Inconel sheath protects the 100 ohm platinum sensor to 670°C along a 12" stem, while the six-pin Lemo smart connector plugs straight into an Additel readout such as the ADT282.



Additel AM1751-BEND-ADT Secondary Reference PRT Probe, 12 x 0.25" with 90° bend, -328 to 1238°F, smart connector AM1751-BEND-ADT
Built for furnace and bath calibration, this secondary reference PRT measures from -328 to 1238°F and holds ±0.015°C accuracy at the triple point of water. An Inconel sheath, bent 90° to clear shallow baths, protects the 100 ohm platinum sensor to 670°C, while the six-pin Lemo smart connector plugs straight into an Additel readout such as the ADT282.



Ask a question about Additel ADT875PC-155-E-110V Dry Well Calibrator with Process Calibrator, -40 to 155°C, insert E, 110V

Customer Reviews for the Additel ADT875PC-155-E-110V

More Additel Products


  • We accept these payment methods:
  • Visa, Master Card, Discover, American Express & PayPal