This industrial grade clamp meter provides extra level of safety in measuring current, voltage, capacitance, and resistance. Measures AC current up to 1000 AC A, voltage up to 750V AC / 1000V DC, frequency, resistance and capacitance and duty cycle
This industrial grade clamp meter provides extra level of safety in measuring current, voltage, capacitance, and resistance. Measures AC current up to 1000 AC A, voltage up to 750V AC / 1000V DC, frequency, resistance and capacitance and duty cycle
Discontinued!
This product has been discontinued and is no longer available.
This is the direct replacement:
This CAT IV rated ACD-3300IND Clamp On Tester is ideal for industrial applications and utilities that require an extra level of safety. Including true-rms sensing for accuracy, this clamp on meter's extra large jaws can clamp on to those wide diameter wires making taking measurements in industrial environments simple.
Features
| DC Voltage | 660 mV, 6.6, 66, 660, 1000 V |
| AC Voltage | 660 mV, 6.6, 66, 660, 750 V |
| AC Current | 66, 660, 1000 A |
| Resistance | 660 Ω, 6.6, 66, 660 kΩ, 6.6, 66 MΩ |
| Capacitance | 6.6, 66, 660 nF, 6.6, 66, 660 µF, 6.6 mF |
| Frequency | 66, 660 Hz, 6.6, 66, 660 kHz, 1 MHz |
| Temperature | -30 to 1832°F (-35 to 1000°C) |
| Diode Test | Test current: 0.8 mA (approximate) Accuracy: ±(1.5% rdg + 5 dgts) Open circuit volts: 3.2 V DC typical Audible indication: <0.03 V Overload protection: 1000 V DC or 750 V AC RMS |
| Continuity | Ranges: 660.0 Ω Audible indication: <30 Ω Response time: 500 ms Overload protection: 1000 V DC or 750 V AC RMS |
| Display | 3" digit liquid crystal display (LCD) (6600 count) with a 66-segment analog bar-graph |
| Auto Power Off | Approximately 30 minutes |
| Backlight | Auto-off approximately 60 seconds |
| Measurement Rate | 2.8 times per second, nominal |
| Environmental | Operating environment: 32 to 122°F (0 to 50°C) at <70% RH Storage temperature: -4 to 140°F (-20 to 60°C) at <80% RH with battery removed from meter Altitude: 6561.7' (2000 m) |
| Jaw Opening Capability | Up to 2" (51 mm) in diameter |
| Power | Single standard 9 V battery, NEDA 1604, JIS 006P, IEC 6F22 Battery life: Typically 75 hours with carbon-zinc; 150 hours with alkaline |
| Safety | LVD meets EN61010-1:2001 and EN61010-2-032:2002, CAT III 1000 V, CAT IV 600 V, class II and pollution degree 2 |
| Dimensions | 11.1 x 4.3 x 2.1" (281 x 108 x 53 mm) |
| Weight | 1.23 lbs (559 g) |
| DC Voltage | 660 mV, 6.6, 66, 660, 1000 V |
| AC Voltage | 660 mV, 6.6, 66, 660, 750 V |
| AC Current | 66, 660, 1000 A |
| Resistance | 660 Ω, 6.6, 66, 660 kΩ, 6.6, 66 MΩ |
| Capacitance | 6.6, 66, 660 nF, 6.6, 66, 660 µF, 6.6 mF |
| Frequency | 66, 660 Hz, 6.6, 66, 660 kHz, 1 MHz |
| Temperature | -30 to 1832°F (-35 to 1000°C) |
| Diode Test | Test current: 0.8 mA (approximate) Accuracy: ±(1.5% rdg + 5 dgts) Open circuit volts: 3.2 V DC typical Audible indication: <0.03 V Overload protection: 1000 V DC or 750 V AC RMS |
| Continuity | Ranges: 660.0 Ω Audible indication: <30 Ω Response time: 500 ms Overload protection: 1000 V DC or 750 V AC RMS |
| Display | 3" digit liquid crystal display (LCD) (6600 count) with a 66-segment analog bar-graph |
| Auto Power Off | Approximately 30 minutes |
| Backlight | Auto-off approximately 60 seconds |
| Measurement Rate | 2.8 times per second, nominal |
| Environmental | Operating environment: 32 to 122°F (0 to 50°C) at <70% RH Storage temperature: -4 to 140°F (-20 to 60°C) at <80% RH with battery removed from meter Altitude: 6561.7' (2000 m) |
| Jaw Opening Capability | Up to 2" (51 mm) in diameter |
| Power | Single standard 9 V battery, NEDA 1604, JIS 006P, IEC 6F22 Battery life: Typically 75 hours with carbon-zinc; 150 hours with alkaline |
| Safety | LVD meets EN61010-1:2001 and EN61010-2-032:2002, CAT III 1000 V, CAT IV 600 V, class II and pollution degree 2 |
| Dimensions | 11.1 x 4.3 x 2.1" (281 x 108 x 53 mm) |
| Weight | 1.23 lbs (559 g) |
