Easily and safely locate energized and de-energized wires, breakers, and fuses with this wire tracer kit. Comes equipped with a transmitter and receiver to easily detect signals in wires or cables behind walls, ceilings, and floors, along with a hard carrying case.
Easily and safely locate energized and de-energized wires, breakers, and fuses with this wire tracer kit. Comes equipped with a transmitter and receiver to easily detect signals in wires or cables behind walls, ceilings, and floors, along with a hard carrying case.
Discontinued!
This product has been discontinued and is no longer available. There is no direct replacement. Don't worry, we have some options to help you find what you need:
Visit our Wire/Cables Tracers category for similar products.
Or let's do a search and help you find what you need:
Locate and trace Energized and De-energized wires, automatically identify breakers
An easier and safer way to locate energized and de-energized wires, breakers and fuses. When the transmitter is connected to the circuit, the receiver easily detects the signal in the wires or cables behind walls, ceilings and floors. The transmitter works on energized and de-energized circuits up to 600 V AC/DC in Category I through Category III electrical environments, allowing for work directly on an energized circuit without the need to take equipment offline. The transmitter also features high signal mode for general tracing and a loop mode designed specifically for locating shorts, as well as two optimal tracing frequencies that are automatically activated based on the detected voltage.
Features
Receiver Features
Transmitter Features
Applications
| Receiver | |
| Measurement Category | CAT III 600 V |
| Operating Voltage | 0 to 600 V AC/DC |
| Operating Frequency | Energized: 6.25 kHz, De-Energized: 32.768 kHz |
| Signal Indications | Numeric, bar graph display and audible beep |
| Response Time | Tip sensor (Energized/De-energized): 500 ms Battery voltage monitoring: 5 sec |
| Range Detection (Open Air) | Tip sensor (Energized) Max distance via air: up to 20' (6.1 m) Pinpointing: approx. 1.97" (5 cm) Tip sensor (De-energized) Max distance via air: up to 14.7' (4.5 m) Pinpointing: approx. 1.97" (5 cm) |
| Transmitter | |
| Measurement Category | CAT III 600 V |
| Operating Voltage | 0 to 600 V AC/DC |
| Operating Frequency | Energized: 6.25 kHz, De-Energized: 32.768 kHz |
| Hazardous Voltage Detection | >30 V AC/DC |
| Signal Indications | LEDs |
| Response Time | Line voltage monitoring: 1 sec Battery voltage monitoring: 5 sec |
| Current Output of Signal (Typical) | Energized circuit: HI mode: 60 mA RMS De-energized circuit: HI mode: 130 mA RMS Loop mode: 160 mA RMS |
| Signal Voltage Output (Nominal) | De-energized circuit: HIGH: 33 V RMS, 140 Vp-p |
| Receiver | |
| Measurement Category | CAT III 600 V |
| Operating Voltage | 0 to 600 V AC/DC |
| Operating Frequency | Energized: 6.25 kHz, De-Energized: 32.768 kHz |
| Signal Indications | Numeric, bar graph display and audible beep |
| Response Time | Tip sensor (Energized/De-energized): 500 ms Battery voltage monitoring: 5 sec |
| Range Detection (Open Air) | Tip sensor (Energized) Max distance via air: up to 20' (6.1 m) Pinpointing: approx. 1.97" (5 cm) Tip sensor (De-energized) Max distance via air: up to 14.7' (4.5 m) Pinpointing: approx. 1.97" (5 cm) |
| Transmitter | |
| Measurement Category | CAT III 600 V |
| Operating Voltage | 0 to 600 V AC/DC |
| Operating Frequency | Energized: 6.25 kHz, De-Energized: 32.768 kHz |
| Hazardous Voltage Detection | >30 V AC/DC |
| Signal Indications | LEDs |
| Response Time | Line voltage monitoring: 1 sec Battery voltage monitoring: 5 sec |
| Current Output of Signal (Typical) | Energized circuit: HI mode: 60 mA RMS De-energized circuit: HI mode: 130 mA RMS Loop mode: 160 mA RMS |
| Signal Voltage Output (Nominal) | De-energized circuit: HIGH: 33 V RMS, 140 Vp-p |
