Providing an efficient and safe method to apply a locate signal to a cable, this clamp is used with the UAT-600 transmitter, enabling it to induce a signal through the insulation into wires or pipes.
Providing an efficient and safe method to apply a locate signal to a cable, this clamp is used with the UAT-600 transmitter, enabling it to induce a signal through the insulation into wires or pipes.
Discontinued!
This product has been discontinued and is no longer available. There are no replacement options.
We can help you find what you need:
Built to last, this signal clamp makes it possible to gain access to a cable for making an electrical contact. Offering complete safety, this accessory provides an efficient and safe method of applying a locate signal to a cable.
Features
| Measurement Category | CAT IV 600 V |
| Operating Voltage/Current | 0 to 600 V, 100 A max |
| Operating Frequency/Tracing Modes | 33 kHz and 8 kHz |
| Signal Voltage Output (Nominal) | 23 V rms at 8 kHz 30 V rms at 33 kHz |
| Operating Temperature and Humidity | -4 to 122°F (-20 to 50°C), ≤90% RH |
| Storage Temperature and Humidity | -40 to 140°F (-40 to 60°C), ≤90% RH |
| Operating Altitude | < 6561 ft (< 2000 m) |
| Pollution Degree | 2 |
| Water and Dust Resistance | IP54 |
| Drop Test | 3.28' (1 m) |
| Size (H x W x L) | Approx. 11.6 x 7.1 x 1.4" (295 x 180 x 37 mm) |
| Weight | Approx. 1.9 lbs (0.85 kg) |
| Measurement Category | CAT IV 600 V |
| Operating Voltage/Current | 0 to 600 V, 100 A max |
| Operating Frequency/Tracing Modes | 33 kHz and 8 kHz |
| Signal Voltage Output (Nominal) | 23 V rms at 8 kHz 30 V rms at 33 kHz |
| Operating Temperature and Humidity | -4 to 122°F (-20 to 50°C), ≤90% RH |
| Storage Temperature and Humidity | -40 to 140°F (-40 to 60°C), ≤90% RH |
| Operating Altitude | < 6561 ft (< 2000 m) |
| Pollution Degree | 2 |
| Water and Dust Resistance | IP54 |
| Drop Test | 3.28' (1 m) |
| Size (H x W x L) | Approx. 11.6 x 7.1 x 1.4" (295 x 180 x 37 mm) |
| Weight | Approx. 1.9 lbs (0.85 kg) |
