Bacharach 0024-1492 Offers

Features

• Fast and accurate O2, CO (0-4,000 ppm), T-stack/air temperature and draft/pressure measurements
• On-screen "hotspot finder" to detect the optimal measurement site
• Nine user-selectable fuels, plus 2 custom
• B-Smart® technology enables in-field sensor replacement with pre-calibrated CO sensors, avoiding costly downtime and inconvenience
• Manual zero/auto-zero (CO) feature
• High CO shut-off/protection feature
• 2-year or 3-year O2 sensor warranty
• As easy as 1-2-3: Select fuel type, select appliance type and then start analysis
• Exclusive Tune-Rite™ On-Demand HVAC/R Assistant: At the touch of a button, the software monitors the combustion analysis process in real-time to deliver the most accurate analysis every time; make instant troubleshooting suggestions; and provide guidance based on live data plus typical characteristics of the combustion appliance
• Combustion analysis should be performed only after combustion para-meters indicate that the appliance has reached "steady-state" operating conditions. Steady-state can be gauged by three things: the change in temperature of combustion products in the vent system; the change in the percentage of oxygen in the flue gas mix, which assists in determining if there is excess air or excess fuel in the combustion process; the change in carbon monoxide (CO) over time - CO levels will spike during the initial fire which is normal, but they should normalize to a lower output as steady-state is reached
• Tune-Rite™ software eliminates the guesswork commonly involved in determining steady-state by showing you a live graphical representation of all combustion parameters as they settle into a steady-state condition
• Measured values of oxygen, stack temperature and carbon monoxide are compared to typical values for the equipment under optimum conditions
• Programmed into the Tune-Rite™ software typical ranges for oxygen, stack temperature and carbon monoxide based on the fuel and equipment type which vary depending on the heating equipment and fuel type
• Typical ranges can be seen in an easy-to-read bar graph format, along with the current values. Green, red and yellow indicators show whether the readings are in range (green), out of range (red), or unstable (yellow)
• TuneRite™ software recommends possible causes for out-of-range measurements - and it will display a prioritized list of most likely potential issues to investigate
• Using your saved "As Found" and "As Left" readings, Tune-Rite™ generates a comprehensive leave-behind service report showing the homeowner what was inspected, adjusted or repaired
• Print stored data (100 records) and data download via USB with Fyrite® User Software