TX6000 Handheld TDR Cable Fault Tester is an excellent meter to troubleshoot communication and power cables up to 19,000 ft. or 6000 m. Just like other graphical TDRs from BI Communications TX6000 detects cable faults and displays them, as graphs of various cable faults such as opens, shorts, splices, taps, or even water ingress into a cable, and the construction of TX6000 handheld TDR is ruggedized and dustproof to IP54 standard. This TDR cable fault locator also comes with an automatic fault location and variable gain control for fine-tuning fault location. The very important upgrades are memory to store up to 50 test results and software for data transfer and analysis.
TX6000 Handheld TDR Cable Fault Tester is an excellent meter to troubleshoot communication and power cables up to 19,000 ft. or 6000 m. Just like other graphical TDRs from BI Communications TX6000 detects cable faults and displays them, as graphs of various cable faults such as opens, shorts, splices, taps, or even water ingress into a cable, and the construction of TX6000 handheld TDR is ruggedized and dustproof to IP54 standard. This TDR cable fault locator also comes with an automatic fault location and variable gain control for fine-tuning fault location. The very important upgrades are memory to store up to 50 test results and software for data transfer and analysis.
Features
| Ranges | Meters 7, 15, 30, 60, 120, 250, 500, 1km, 2km, 3km, 6km feet 23, 49, 98, 197, 394, 820, 1640, 3280, 6560, 9850, 19000 |
| Range Selection | Manual range control |
| Accuracy | 1% of selected range |
| Resolution | Approx 1% of range |
| Sensitivity | Min 3 pixel return at 4km on 0,6mm , PE , TP |
| Velocity Factor | Adjustable from 1% to 99% |
| Output Pulse | 5 volts peak to peak. Into open circuit |
| Output Impedance | Selectable 25, 50, 75 and 100 ohms |
| Output Pulse Width | 3 ns to 3 ms, Automatic with range |
| Scan Rate | 2 scans / second or scan held (not on 3km/6km range) |
| Tone Generator | 810 to 1100 Hz |
| Battery Life | 60 hours continuous scanning |
| Power Supply | 6 volts 4 x 1.5 AA Alkaline cells |
| Power Down | Selectable 1, 2, 3, 5 minutes or disabled |
| Back Lit Display | 128 x 64 pixel |
| Voltage Detection | 250 volts AC |
| Operating Temp | -10 to 50°C |
| Storage Temp | -20 to 70°C |
| Safety | IEC 61010-1, EN 60950, EMC BS/EN 61326-1, IP54 |
| Dimensions | 165 x 90 x 37mm (6.5 x 3.5 x 1.5 ins) |
| Weight | 350 g (12 oz) |
| Ranges | Meters 7, 15, 30, 60, 120, 250, 500, 1km, 2km, 3km, 6km feet 23, 49, 98, 197, 394, 820, 1640, 3280, 6560, 9850, 19000 |
| Range Selection | Manual range control |
| Accuracy | 1% of selected range |
| Resolution | Approx 1% of range |
| Sensitivity | Min 3 pixel return at 4km on 0,6mm , PE , TP |
| Velocity Factor | Adjustable from 1% to 99% |
| Output Pulse | 5 volts peak to peak. Into open circuit |
| Output Impedance | Selectable 25, 50, 75 and 100 ohms |
| Output Pulse Width | 3 ns to 3 ms, Automatic with range |
| Scan Rate | 2 scans / second or scan held (not on 3km/6km range) |
| Tone Generator | 810 to 1100 Hz |
| Battery Life | 60 hours continuous scanning |
| Power Supply | 6 volts 4 x 1.5 AA Alkaline cells |
| Power Down | Selectable 1, 2, 3, 5 minutes or disabled |
| Back Lit Display | 128 x 64 pixel |
| Voltage Detection | 250 volts AC |
| Operating Temp | -10 to 50°C |
| Storage Temp | -20 to 70°C |
| Safety | IEC 61010-1, EN 60950, EMC BS/EN 61326-1, IP54 |
| Dimensions | 165 x 90 x 37mm (6.5 x 3.5 x 1.5 ins) |
| Weight | 350 g (12 oz) |
