Converts any DMM to a current clamp. Measures current without disconnecting circuit under test and up to 400A DC/AC.
Converts any DMM to a current clamp. Measures current without disconnecting circuit under test and up to 400A DC/AC.
| Current | 2 to 400 A AC/DC |
| Accuracy | ±(2% reading + 2 A) AC/DC Accuracy specified at 18 to 20° |
| AC Frequency Response | 50 to 400 Hz |
| Output | 1 mV per Amp |
| Input Impedance (of DDM) | 10 kΩ minimum |
| Output Cable | Coiled cord stretches to over 6' (1.83 m) Connects to multimeter voltage jacks |
| Maximum Conductor Size | 1.1" (3.3 mm) |
| Temperature | Operating: 32 to 104°F (0 to 40°C), <70% R.H Storage: -4 to 158°F (-20 to 70°C), <80% R.H |
| Power | Requirement: 9 V battery (NEDA 1604) Battery life: 100 hours typical Low battery indication: Red LED |
| Dimensions | 1.3 x 2.75 x 7" (33 x 70 x 178 mm) |
| Weight | 11 oz (290 g) |
