BW MC2-00HM-Y-NA GasAlertMicroClip XT

Model: MC2-00HM-Y-NA

Downloads:

More BW Products

Ask an Expert

BW MC2-00HM-Y-NA GasAlertMicroClip XT

Model: MC2-00HM-Y-NA

GasAlertMicroClip XT Hydrogen Sulfide (H₂S), Carbon Monoxide (CO). Yellow housing.

Discontinued!

This product has been discontinued and is no longer available.
This is the direct replacement:

Honeywell BW MicroClip XL Series Multi-Gas Detector, H₂S, CO, yellow

Model: MCXL-00HM-Y-NA

Compact and easy-to-use, this multi-gas detector is ideally used in confined hazardous environments and can easily detect the presence of carbon monoxide (CO) and hydrogen sulfide (H₂S). With an 18-hour battery run-time, this detector also features a one-button operation as well as a flashing green IntelliFlash light for compliance at a glance.

Learn More

BW Technologies mc2-00HM-y-na GAS DETECTOR, H2S/CO

Gas Monitored H2S/ CO: Range: 0 to 100 ppm/ 0 to 500 ppm, Resolution: 0 to 500 ppm/ 1 ppm
Provides 95 dB alarm tone (typical) and bright wide-angled alarm bars
Simultaneous monitoring of up to four gases
Continuous LCD shows simultaneous gas concentrations
Four alarm levels: instant Low and High alarm for all gases; TWA (time weighted average) and STEL (Short term exposure limit) for H2S, CO, OL (over limit alarm)
Equipped with internal vibrating alarm for high noise areas
Records TWA, STEL and maximum exposures to gas and displays readings on command
Fully compatible with MicroDock II automatic test and calibration system
Compatible with motorized remote sampling pump
Full-function self-test of audible/visual/vibration alarms, plus integrity of sensor, battery and circuitry
IntelliFlash provides continuous visual confirmation of detector operation and compliance
Tamper-proof, one button operation
Powered by a lithium polymer battery (run time typically 10 hours; recharges in less than 4 hours)
Built-in concussion-proof boot
IP66/67 dust and water protection rating
User selectable options include: confidence beep, set STEL interval, latching alarms, safe display mode, stealth mode, calibration lock, auto zero on start up, O2 auto calibration on start up, set bump test interval, IntelliFlash interval, combustible sensor measurement selection (0-100% LEL or 5-5.0% v/v meth-ane), user setable calibration gas level, force bump test when overdue, force calibration when overdue, low alarm acknowledge, language choice (five), set custom start up message
Conforms to CSA Class I, Div. 1, Gr. A, B, C, D; ATEX Ex ia IIC T4 Ga, CE EX II 1 G
Includes charger wall plug, calibration cap and tubing, manual and technical reference guide

Specification:

Alarms: Visual, vibrating, audible (95 dB); Low, High, STEL, TWA, OL (over limit)
Tests: Audible/visual alarms on activation, sensors, battery, and circuitry (continuous)
GENERAL
Power Supply: Lithium polymer battery
Battery Life: 10 hrs typical
Dimensions: 4.4 x 2.4 x 1.1" (113 x 60 x 29mm)
Weight: 6 oz (171 g)

What's included with the BW MC2-00HM-Y-NA

BW MC2-00HM-Y-NA GasAlertMicroClip XT

Brochure: Gas Detection - Gas Book

Brochure: Gas Detection - Gas Book 2

Brochure: Gas Detection - Gas Book 3

Ask a question about BW MC2-00HM-Y-NA GasAlertMicroClip XT

Customer Reviews for the BW MC2-00HM-Y-NA

Description ➕➖

BW Technologies mc2-00HM-y-na GAS DETECTOR, H2S/CO

Gas Monitored H2S/ CO: Range: 0 to 100 ppm/ 0 to 500 ppm, Resolution: 0 to 500 ppm/ 1 ppm
Provides 95 dB alarm tone (typical) and bright wide-angled alarm bars
Simultaneous monitoring of up to four gases
Continuous LCD shows simultaneous gas concentrations
Four alarm levels: instant Low and High alarm for all gases; TWA (time weighted average) and STEL (Short term exposure limit) for H2S, CO, OL (over limit alarm)
Equipped with internal vibrating alarm for high noise areas
Records TWA, STEL and maximum exposures to gas and displays readings on command
Fully compatible with MicroDock II automatic test and calibration system
Compatible with motorized remote sampling pump
Full-function self-test of audible/visual/vibration alarms, plus integrity of sensor, battery and circuitry
IntelliFlash provides continuous visual confirmation of detector operation and compliance
Tamper-proof, one button operation
Powered by a lithium polymer battery (run time typically 10 hours; recharges in less than 4 hours)
Built-in concussion-proof boot
IP66/67 dust and water protection rating
User selectable options include: confidence beep, set STEL interval, latching alarms, safe display mode, stealth mode, calibration lock, auto zero on start up, O2 auto calibration on start up, set bump test interval, IntelliFlash interval, combustible sensor measurement selection (0-100% LEL or 5-5.0% v/v meth-ane), user setable calibration gas level, force bump test when overdue, force calibration when overdue, low alarm acknowledge, language choice (five), set custom start up message
Conforms to CSA Class I, Div. 1, Gr. A, B, C, D; ATEX Ex ia IIC T4 Ga, CE EX II 1 G
Includes charger wall plug, calibration cap and tubing, manual and technical reference guide

Specification:

Alarms: Visual, vibrating, audible (95 dB); Low, High, STEL, TWA, OL (over limit)
Tests: Audible/visual alarms on activation, sensors, battery, and circuitry (continuous)
GENERAL
Power Supply: Lithium polymer battery
Battery Life: 10 hrs typical
Dimensions: 4.4 x 2.4 x 1.1" (113 x 60 x 29mm)
Weight: 6 oz (171 g)