Compatible with the Skydrol, this CPF hose is rated to MAWP 10,000 psi / 700 bar / 70 MPa. Measuring 1.5 meters in length, this hose is not compatible with dioctyl sebacate fluid.
Compatible with the Skydrol, this CPF hose is rated to MAWP 10,000 psi / 700 bar / 70 MPa. Measuring 1.5 meters in length, this hose is not compatible with dioctyl sebacate fluid.
CPF is an improved cone type fitting system that adds a unique o-ring sealing system which permits leak free connections without tools. CPF fittings can be directly connected to 1/4" medium pressure cone type fittings from other manufacturers*, provided that wrenches are used to complete the connection. The fittings of the CPF system have been designed and tested to comply with ASME B31.3-2008, Chapter IX: High Pressure Piping.
* HiP: 1/4" Female and Male Medium Pressure (LF4 & LM4 series)
Autoclave Engineers: 1/4" Female and Male Medium Pressure (SF250CX series)
Notes:
Non-Crystal MP adapters require wrench tightening
Hose is not compatible with dioctyl sebacate fluid
CAUTION: To achieve CPF maximum allowable working pressures no o-ring substitutions are allowed.
If a torque wrench isn't practical to use, hand tighten then tighten an additional 20 degrees using a wrench.
| Maximum Allowable Working Pressure | 10,000 psi/700 bar/70 MPa |
| Temperature Range | Finger-tight: -4 to 122°F (-20 to 50°C) Wrench-tight: -40 to 302°F (-40 to 150°C) |
| Minimum Hose Bend Radius | 1.0" (25 mm) |
| Thread Type | 7/16-20 UNF 2B |
| Cone Angle | 60°, nominal |
| Fittings | High Strength 316 Stainless Steel |
| Construction | Polyamide core with urethane jacket |
| Dimensions |
Hose Length: 5' (1.5 m) Hex Width: 0.63" (16 mm) Fitting Length: 1.29" (33 mm) Thread Diameter: 0.72" (18 mm) External Hose Diameter: 0.235" (6 mm) Internal Hose Diameter: 0.08" (2 mm) |
| Hose Weight | 0.0179 lbs/ft (26.6 g/m) |
| Maximum Allowable Working Pressure | 10,000 psi/700 bar/70 MPa |
| Temperature Range | Finger-tight: -4 to 122°F (-20 to 50°C) Wrench-tight: -40 to 302°F (-40 to 150°C) |
| Minimum Hose Bend Radius | 1.0" (25 mm) |
| Thread Type | 7/16-20 UNF 2B |
| Cone Angle | 60°, nominal |
| Fittings | High Strength 316 Stainless Steel |
| Construction | Polyamide core with urethane jacket |
| Dimensions |
Hose Length: 5' (1.5 m) Hex Width: 0.63" (16 mm) Fitting Length: 1.29" (33 mm) Thread Diameter: 0.72" (18 mm) External Hose Diameter: 0.235" (6 mm) Internal Hose Diameter: 0.08" (2 mm) |
| Hose Weight | 0.0179 lbs/ft (26.6 g/m) |
