Dwyer 634ES-1 Offers

• Sense a single pressure for air, compatible gas or liquid and provide 4-20 mA output signal
• Positive pressure can be measured within an accuracy of ±0.5% of span.
• Uses an isolated piezoresistive pressure sensor to produce a resistance change across a wheatstone bridge.
• 2-wire operation simplifies installation.
• Zero and span adjustments are fully protected inside a rugged die cast aluminum housing with durable gray polyurethane finish.
• Enclosure is designed to meet NEMA 4X requirements.

Specifications

Service: Compatible, gases & liquids.
Wetted Materials: Types 316, 316L SS.
Accuracy: ±0.5% F.S.
Stability: ±1% F.S./yr.
Temperature Limits: 20 to 120°F (-6.67 to 48.9°C).
Compensated Temperature Limits: 20 to 120°F (-6.67 to 48.9°C).
Pressure Limit: 1.5x maximum pressure range.
Thermal Effect: ±0.025% F.S./°F (0.045% F.S./°C).
Power Requirements: 10 to 35 VDC (2-wire).
Output Signal: 4 to 20 mA.
Zero and Span Adjustments: Protected potentiometers located in auxiliary housing.
Loop Resistance: 1250 ohms DC max.
Current Consumption: 38 mA DC max.
Electrical Connections: Terminal block.
Process Connection: 1/4" (6.35 mm) female NPT x 1/2" (12.7 mm) male NPT.
Enclosure Rating: Designed to meet NEMA 4X.
Mounting Orientation: Not position sensitive.
Weight: 1 lb 10.6 oz (754 g).
Agency Approvals: CE.

Features

• Self-leveling verticals plus 90° beam for laying out square
• Rotation stops and laser flashes when out of level
• Adjustable for uneven surfaces
• Scan/line function in horizontal or vertical setting
• Plumb-up from floor to ceiling
• Pendulum lock protects the laser when turned off
• Point/dot function
• Outside handles protect laser
• Dust and water protected
• Elevate the laser 4.5"/12 cm
• Manual pre-adjusting required
• Height of laser from the floor: 8" in the horizontal position
• Includes: Laser, indoor/outdoor laser receiver with clamp, batteries (3x AA) and hard shell carrying case