Ideal for general purpose melt-pressure measurements requiring simple installation, repeatability, and reliability and has a single J thermocouple with 3" flex. The melt pressure transducer is a +/- 1.0% sensor that provides the industry-standard 3.33 mV/V signal designed to work with most pressure indicators. Features a ½ to 20 UNF thread for installation in standard transducer mounting holes and can be supplied with a variety of electrical connections.
Ideal for general purpose melt-pressure measurements requiring simple installation, repeatability, and reliability and has a single J thermocouple with 3" flex. The melt pressure transducer is a +/- 1.0% sensor that provides the industry-standard 3.33 mV/V signal designed to work with most pressure indicators. Features a ½ to 20 UNF thread for installation in standard transducer mounting holes and can be supplied with a variety of electrical connections.
The melt pressure transducer is easy to calibrate and has superior abrasion resistance.
Features
Applications
| Pressure Range | 1,000 to 10,000 psi |
| Snout Length | 6" (15 cm) |
| Stem Length | 18" (46 cm) Flex |
| Thermocouple | Single J TC with 3" Flex |
| Output | 3.33 mV/V +/- 2.0% |
| Input Voltage | 10 Vdc recommended, 12 Vdc maximum |
| Combined Error | +/- 1.0% FSO, (Including Linearity, Repeatability & Hysteresis) |
| Repeatability | +/- 0.2%FSO |
| Configuration | Four-arm bonded foil Wheatstone bridge strain gage |
| Bridge Resistance | Input & Output: 345 Ohms minimum |
| Over Pressure | 2 X FSO |
| Zero Balance | +/- 10% FSO |
| Internal Shunt Calibration (R-Cal) | 80% FSO +/- 1% |
| Insulation Resistance | 1000 megohms @ 50 Vdc |
| Max Diaphragm Temperature | 750°F (400°C) |
| Electronics Operating Temperature | 250°F (121°C) |
| Pressure Range | 1,000 to 10,000 psi |
| Snout Length | 6" (15 cm) |
| Stem Length | 18" (46 cm) Flex |
| Thermocouple | Single J TC with 3" Flex |
| Output | 3.33 mV/V +/- 2.0% |
| Input Voltage | 10 Vdc recommended, 12 Vdc maximum |
| Combined Error | +/- 1.0% FSO, (Including Linearity, Repeatability & Hysteresis) |
| Repeatability | +/- 0.2%FSO |
| Configuration | Four-arm bonded foil Wheatstone bridge strain gage |
| Bridge Resistance | Input & Output: 345 Ohms minimum |
| Over Pressure | 2 X FSO |
| Zero Balance | +/- 10% FSO |
| Internal Shunt Calibration (R-Cal) | 80% FSO +/- 1% |
| Insulation Resistance | 1000 megohms @ 50 Vdc |
| Max Diaphragm Temperature | 750°F (400°C) |
| Electronics Operating Temperature | 250°F (121°C) |
