The benchtop tester supports simultaneous high-speed measurement (10 seconds per cell). The meter measures the impedance of lithium-ion batteries using the low-frequency AX-IR measurement method without charging and discharging the battery. Software is included for viewing measurement data and trending analysis.
The benchtop tester supports simultaneous high-speed measurement (10 seconds per cell). The meter measures the impedance of lithium-ion batteries using the low-frequency AX-IR measurement method without charging and discharging the battery. Software is included for viewing measurement data and trending analysis.
Discontinued!
This product has been discontinued and is no longer available. There are no replacement options.
We can help you find what you need:
Features
Correct any offset voltage and gain drift that may be present in the circuit to improve the accuracy of voltage measurement.
Specify a delay between AC voltage being applied and sampling being started so that measurement can start after the response stabilizes.
To prevent the battery that is being measured from charging or discharging, the battery impedance meter terminates the applied measurement signal when zero is crossed.
If measurement signals drift due to the battery characteristics or the input impedance of measurement instrument, the tester applies correction to the linear drift.
Reaction resistance measured at low frequency is sensitive to temperature. An optional temperature sensor measures the temperature around the battery and associates the results with data, thereby improving the reliability of the measurements.
Advantages
Applications
| Parameters measured | Impedance, Voltage, Temperature |
| Allowable Input Voltage | Up to 5 V |
| Impedance Measurement | Parameters: R, X, Z, θ Frequency: 0.1 – 1050 Hz Measurement ranges: 3.0000 mΩ, 10.0000 mΩ, 100.000 mΩ Testing current: 3 mΩ range: 1.5 Arms, 10 mΩ range: 500 mArms, 100 mΩ range: 50 mArms |
| Voltage Measurement | Measurement range: 5.00000 V (single range) Measurement time: 0.1 s (Fast) to 1.0 s (Slow) |
| Temperature Measurement | Range: -10 – 60°C (14 – 140ºF) Measurement time: 2.3 |
| Basin Accuracy | Z: ±0.4% rdg. θ: ±0.1° V: ±0.0035% rdg. ±5 dgt. Temperature: ±0.5 °C at 10 – 40°C (50 – 104ºF) |
| Functions | Functions: Comparator, self-calibration, sample delay, average, contact check, measurement current error, and other |
| Interfaces | RS-232C/USB (virtual COM port) * Cannot be used simultaneously EXT. I/O (NPN/PNP can be switched) |
| Power Supply | 100 to 240 V AC, 50/60 Hz, 80 VA max |
| Dimensions WxHxD | 192 x 121 x 55 mm (7.56 x 4.76 x 2.17 in.) |
| Weight | 800 g (1.76 lbs.) with batteries |
| Parameters measured | Impedance, Voltage, Temperature |
| Allowable Input Voltage | Up to 5 V |
| Impedance Measurement | Parameters: R, X, Z, θ Frequency: 0.1 – 1050 Hz Measurement ranges: 3.0000 mΩ, 10.0000 mΩ, 100.000 mΩ Testing current: 3 mΩ range: 1.5 Arms, 10 mΩ range: 500 mArms, 100 mΩ range: 50 mArms |
| Voltage Measurement | Measurement range: 5.00000 V (single range) Measurement time: 0.1 s (Fast) to 1.0 s (Slow) |
| Temperature Measurement | Range: -10 – 60°C (14 – 140ºF) Measurement time: 2.3 |
| Basin Accuracy | Z: ±0.4% rdg. θ: ±0.1° V: ±0.0035% rdg. ±5 dgt. Temperature: ±0.5 °C at 10 – 40°C (50 – 104ºF) |
| Functions | Functions: Comparator, self-calibration, sample delay, average, contact check, measurement current error, and other |
| Interfaces | RS-232C/USB (virtual COM port) * Cannot be used simultaneously EXT. I/O (NPN/PNP can be switched) |
| Power Supply | 100 to 240 V AC, 50/60 Hz, 80 VA max |
| Dimensions WxHxD | 192 x 121 x 55 mm (7.56 x 4.76 x 2.17 in.) |
| Weight | 800 g (1.76 lbs.) with batteries |
