Configurable for virtually any frequency input to DC signal output within a 0 to 1000 Hz range, this frequency input field configurable isolator provides an isolated DC output in proportion to a frequency input. In addition, this isolator features an ultra-slim housing and a flexible power supply.
Configurable for virtually any frequency input to DC signal output within a 0 to 1000 Hz range, this frequency input field configurable isolator provides an isolated DC output in proportion to a frequency input. In addition, this isolator features an ultra-slim housing and a flexible power supply.
Discontinued!
This product has been discontinued and is no longer available. There are no replacement options.
We can help you find what you need:
Ideal for high-density installations, this frequency input field configurable isolator features a wide ranging zero and span adjustability.
Features
Touch-CAL™ Technology
This unit utilizes 'Touch-Cal' technology to greatly simplify configuration. To set the input frequency range, simply apply the high input frequency and push the CAL button while the INPUT LED is lit. The low input frequency is then applied and pushing the CAL button once again stores the low frequency input. The high and low ranges are stored in non-volatile memory and correspond to the high and low output range which is selected via DIP switches. To precisely adjust the output, the user adjusts the input frequency while the OUTPUT LED is lit until the desired output level is achieved. The output levels are locked-in by pushing the CAL button. Status LEDs show the operation mode of the device.
Status LEDs
This unit utilizes three status LEDs. The green LED varies intensity as the frequency changes from 0 to 100% of full scale range (e.g., for a configuration of 0 to 1000 Hz, the LED will be off with an input of 0 Hz and fully illuminated at 1000 Hz. With an input of 500 Hz, the LED will be dim). If the input signal is 10% more than full scale range (over-ranged), the LED will flash at 8 Hz. The yellow INPUT LED denotes input programming modes. The red OUTPUT LED denotes output programming modes.
Applications
| Input | Frequency input: Full scale range: 0 to 1000 Hz Amplitude range: 150 mVp to 150 Vrms Impedance: >10 KΩ Over-voltage: 180 Vrms, maximum Over-range: 20 KHz, maximum Common mode (input to gnd): 1800 V DC, maximum Zero turn-up: 99% of full scale range (9998 Hz) Span turn-down: 99% of full scale range (2 Hz) |
| Output | Voltage: Output: 0 to 5 V, 0 to 10 V Source impedance: <100 Ω Drive: 10 mA, maximum (1 KΩ, minimum at 10 V) Current: Output: 4 to 20 mA Source impedance: >100 KΩ Compliance: 12 V, maximum (600 Ω, maximum) |
| Accuracy (Including Linearity, Hysteresis) | ±0.1% of selected range at 77°F (25°C) |
| Stability | ±0.025%/°C maximum of selected range |
| Response Time (10 to 90%) | 3 input cycles + 250 ms |
| Common Mode Rejection | DC: 100 dB >60 Hz: 80 dB |
| Isolation | 1800 V DC between input, output and power |
| LED Indication (Green) | LEVEL (green): Lit when power is on, input >110% then 8 Hz flash, input <-10% then 4 Hz flash INPUT (yellow): Input range programming status OUTPUT (red): Output range programming status |
| Humidity (Non-Condensing) | Operating: 15 to 95% at 113°F (45°C) Soak: 90% for 24 hours at 149°F (65°C) |
| Temperature Range | Operating: 32 to 131°F (0 to 55°C) Storage: -13 to 158°F (-25 to 70°C) |
| Wire Terminations | Screw terminals for 12 to 22 AWG |
| EMC Compliance (CE Mark) | EMC: EN61326-1:2013 Safety: EN61010-2:2013 |
| Agency Approvals | CSA certified per standard C22.2, No. 0-M91 and 142-M1987 (File No. LR42272) UL recognized per standard UL508 (File No.E99775) CE conformance per EMC directive 2004/108/EC and low voltage directive 2006/95/EC RoHS Compliant |
| Power | Consumption: 1.5 W typical, 2.5 W maximum Range: 9 to 30 V DC |
| Dimensions | 3.54 x 4.34 x 0.5" (90 x 110.2 x 12.6 mm) |
| Weight | 0.5 lbs (226.79 g) |
| Input | Frequency input: Full scale range: 0 to 1000 Hz Amplitude range: 150 mVp to 150 Vrms Impedance: >10 KΩ Over-voltage: 180 Vrms, maximum Over-range: 20 KHz, maximum Common mode (input to gnd): 1800 V DC, maximum Zero turn-up: 99% of full scale range (9998 Hz) Span turn-down: 99% of full scale range (2 Hz) |
| Output | Voltage: Output: 0 to 5 V, 0 to 10 V Source impedance: <100 Ω Drive: 10 mA, maximum (1 KΩ, minimum at 10 V) Current: Output: 4 to 20 mA Source impedance: >100 KΩ Compliance: 12 V, maximum (600 Ω, maximum) |
| Accuracy (Including Linearity, Hysteresis) | ±0.1% of selected range at 77°F (25°C) |
| Stability | ±0.025%/°C maximum of selected range |
| Response Time (10 to 90%) | 3 input cycles + 250 ms |
| Common Mode Rejection | DC: 100 dB >60 Hz: 80 dB |
| Isolation | 1800 V DC between input, output and power |
| LED Indication (Green) | LEVEL (green): Lit when power is on, input >110% then 8 Hz flash, input <-10% then 4 Hz flash INPUT (yellow): Input range programming status OUTPUT (red): Output range programming status |
| Humidity (Non-Condensing) | Operating: 15 to 95% at 113°F (45°C) Soak: 90% for 24 hours at 149°F (65°C) |
| Temperature Range | Operating: 32 to 131°F (0 to 55°C) Storage: -13 to 158°F (-25 to 70°C) |
| Wire Terminations | Screw terminals for 12 to 22 AWG |
| EMC Compliance (CE Mark) | EMC: EN61326-1:2013 Safety: EN61010-2:2013 |
| Agency Approvals | CSA certified per standard C22.2, No. 0-M91 and 142-M1987 (File No. LR42272) UL recognized per standard UL508 (File No.E99775) CE conformance per EMC directive 2004/108/EC and low voltage directive 2006/95/EC RoHS Compliant |
| Power | Consumption: 1.5 W typical, 2.5 W maximum Range: 9 to 30 V DC |
| Dimensions | 3.54 x 4.34 x 0.5" (90 x 110.2 x 12.6 mm) |
| Weight | 0.5 lbs (226.79 g) |
