FREE SHIPPING ON ONLINE ORDERS OVER $199*

Extech EC410 ExStik Conductivity/TDS/Salinity Kit

Model: EC410 | UPC: 0793950054109

Extech EC410 ExStik Conductivity/TDS/Salinity Kit-

Downloads:

More Extech Products

Ask an Expert

Extech EC410 ExStik Conductivity/TDS/Salinity Kit

Model: EC410 | UPC: 0793950054109

Waterproof meter with high accuracy multi-range sensor that measures four parameters.

Waterproof meter with high accuracy multi-range sensor that measures four parameters.

Discontinued!

This product has been discontinued and is no longer available.
This is the direct replacement:

Extech EC510 Waterproof ExStik II pH/Conductivity Meter Kit-

Extech EC510 Waterproof ExStik II pH/Conductivity Meter Kit

Model: EC510

Combination flat surface pH electrode with autoranging high accuracy Conductivity cell.

Learn More

Recommended Accessories

Extech EC505 Replacement pH Electrode/Conductivity Cell Module for ExStik Conductivity meters-

Extech EC505 Replacement pH Electrode/Conductivity Cell Module for ExStik Conductivity meters

EC505

Extech EC410 Offers

Features

  • Kit includes EC400 Conductivity/TDS/Salinity/Temperature Meter, with sensor, protective cap, three calibration standards (30mL bottle each), weighted base, sample plastic cups with caps, batteries, neck strap, and carrying case
  • Patented sensor technology enables simultaneous measurement of conductivity, TDS, salinity, and temperature
  • Simultaneous display of conductivity, TDS, or salinity plus temperature
  • Units of measure include µS/cm, mS/cm, ppm, ppt, mg/L, g/L, °F, and °C
  • Adjustable conductivity to TDS ratio factor from 0.4 to 1.0 — conveniently calculates the TDS value
  • Automatic Temperature Compensation of 2% per °C
  • Internal memory stores up to 25 labeled readings for easy recall
  • Large 3-1/2 digit (2000 count) LCD display with analog bargraph to indicate sample trends
  • Data hold
  • Auto power off and low battery indication
  • Easy to replace conductivity cell module
  • Plastic sample cup and iron cast weighted base allows for hands-free operation while holding up the meter during measurement stage
  • Waterproof design to withstand wet environments, meets IP57 standard

Extech EC410 Specifications

Conductivity Range 0 to 1999µS/cm; 2.00 to 19.99mS/cm
TDS Range 0 to 999 ppm (mg/L); 1.00 to 9.99 ppt (g/L)
Accuracy ±2% FS
Salinity Range 0 to 999 ppm (mg/L); 1.00 to 9.99 ppt (g/L)
Accuracy ±2% FS
Temperature Range 32 to 149°F (0 to 65°C)
Accuracy ±1.8°F/1°C
Dimensions 9.5 x 6.8 x 2.8" (241 x 173 x 71mm)
Weight 1.56 lb (708g)
Click here for complete specifications on the Extech EC410

What's included with the Extech EC410

  • Conductivity/TDS/Salinity/Temperature Meter
  • Conductivity Cell
  • Protective Sensor Cap
  • 84µS/cm, 1413µS/cm and 12880µS/cm Calibration Standards (30mL bottle each)
  • Weighted Base
  • 3 x Sample Cups with Caps
  • 48" (1.2m) Neck Strap
  • Hard Carrying Case
  • 4 x 3V CR2032 Button Batteries

Click on a category to view a selection of compatible accessories with the Extech EC410 ExStik Conductivity/TDS/Salinity Kit.

Extech EC505 Replacement pH Electrode/Conductivity Cell Module for ExStik Conductivity meters EC505
Combination flat surface pH electrode/conductivity cell for ExStik Conductivity meters.



Ask a question about Extech EC410 ExStik Conductivity/TDS/Salinity Kit

Customer Reviews for the Extech EC410

Extech EC410 Offers

Features

  • Kit includes EC400 Conductivity/TDS/Salinity/Temperature Meter, with sensor, protective cap, three calibration standards (30mL bottle each), weighted base, sample plastic cups with caps, batteries, neck strap, and carrying case
  • Patented sensor technology enables simultaneous measurement of conductivity, TDS, salinity, and temperature
  • Simultaneous display of conductivity, TDS, or salinity plus temperature
  • Units of measure include µS/cm, mS/cm, ppm, ppt, mg/L, g/L, °F, and °C
  • Adjustable conductivity to TDS ratio factor from 0.4 to 1.0 — conveniently calculates the TDS value
  • Automatic Temperature Compensation of 2% per °C
  • Internal memory stores up to 25 labeled readings for easy recall
  • Large 3-1/2 digit (2000 count) LCD display with analog bargraph to indicate sample trends
  • Data hold
  • Auto power off and low battery indication
  • Easy to replace conductivity cell module
  • Plastic sample cup and iron cast weighted base allows for hands-free operation while holding up the meter during measurement stage
  • Waterproof design to withstand wet environments, meets IP57 standard
Show More...

Extech EC410 Specifications

Conductivity Range 0 to 1999µS/cm; 2.00 to 19.99mS/cm
TDS Range 0 to 999 ppm (mg/L); 1.00 to 9.99 ppt (g/L)
Accuracy ±2% FS
Salinity Range 0 to 999 ppm (mg/L); 1.00 to 9.99 ppt (g/L)
Accuracy ±2% FS
Temperature Range 32 to 149°F (0 to 65°C)
Accuracy ±1.8°F/1°C
Dimensions 9.5 x 6.8 x 2.8" (241 x 173 x 71mm)
Weight 1.56 lb (708g)
Click here for complete specifications on the Extech EC410

What's included with the Extech EC410

  • Conductivity/TDS/Salinity/Temperature Meter
  • Conductivity Cell
  • Protective Sensor Cap
  • 84µS/cm, 1413µS/cm and 12880µS/cm Calibration Standards (30mL bottle each)
  • Weighted Base
  • 3 x Sample Cups with Caps
  • 48" (1.2m) Neck Strap
  • Hard Carrying Case
  • 4 x 3V CR2032 Button Batteries

Click on a category to view a selection of compatible accessories with the Extech EC410 ExStik Conductivity/TDS/Salinity Kit.

Extech EC505 Replacement pH Electrode/Conductivity Cell Module for ExStik Conductivity meters EC505
Combination flat surface pH electrode/conductivity cell for ExStik Conductivity meters.



Ask a question about Extech EC410 ExStik Conductivity/TDS/Salinity Kit

Customer Reviews for the Extech EC410

More Extech Products


  • We accept these payment methods:
  • Visa, Master Card, Discover, American Express & PayPal