Extech MN25 MiniTec Digital MultiMeter

Model: MN25 | UPC: 793950380253

Extech MN25 MiniTec Digital MultiMeter

Model: MN25 | UPC: 793950380253

Compact size manual ranging multimeter with 8 functions.

Compact size manual ranging multimeter with 8 functions.

Discontinued!

This product has been discontinued and is no longer available.

There is no direct replacement, however we recommend the:

REED R5099 Compact Multimeter with NCV-

REED R5099 Compact Multimeter with NCV

Model: R5099

Autoranging digital multimeter with built-in non-contact voltage (NCV) detector and 4,000 count backlight LCD display.


Not what you're looking for? Let’s do a search and help you find what you need.


Extech MN25 Offers

Extech MN25 - MiniTec® Digital MultiMeters

MiniTec® Digital MultiMeters

Rugged pocket design with 8 to 11 Functions

Includes Relative zero, Data Hold and Range Hold

Features

  • 4000 counts on large LCD with full function indication
  • Measures AC/DC Voltage and Current, Resistance, Capacitance, Frequency and Temperature
  • Temperature measurements to 1400°F (760°C)
  • Duty Cycle, Continuity and Diode test
  • Autoranging with manual range override
  • 10A fuse protection
  • Overload protection and indication
  • Auto power off saves battery life
  • Includes protective rubber holster, general purpose bead wire Type K temperature probe (Model MN26T), two 1.5V AAA batteries and test leads

Extech MN25 Specifications

V DC V AC 600V DC/AC 200Vrms on 200mV range
Storage Humidity < 80%
mA DC 200mA 250V fast acting fuse
A DC A AC 10A 250V fast acting fuse(30 seconds max every 15 minutes)
Resistance Continuity 250Vrms for 15sec max
Display 3 1/2 digit 2000 count LCD 0.5" digits
Overrange indication "1" is displayed
Diode Test Test current of 1mA maximum open circuit voltage 2.8V DC typical
Continuity Check Audible signal will sound if the resistance is less than approximately 30 Ω
Battery Test current 9V (6mA); 1.5V (100mA)
Input Impedance >1M Ω
ACV Bandwidth 45Hz to 450Hz
DCA voltage drop 200mV
Polarity Automatic (no indication for positive polarity); Minus (-) sign for negative polarity.
Measurement Rate 2 times per second nominal
Low Battery Indication "BAT" is displayed if battery voltage drops below operating voltage
Battery 9 Volt Battery
Fuses mA μ A ranges; 0.2A/250V fast blow A range; 10A/250V fast blow
Operating Temperature 41°F to 104°F (5°C to 40°C)
Storage Temperature -4°F to 140°F (-20°C to 60°C)
Operating Humidity Max 80% up to 87°F (31°C) decreasing linearly to 50% at 104°F (40°C)
Operating Altitude 7000ft. (2000) meters maximum.
Weight 9.17 oz. (260g).
Size 4.78 x 2.38 x 1.57" (121.5 x 60.6 x 40mm)
Safety For indoor use and in accordance with Overvoltage Category II Pollution Degree 2. Category II includes local level appliance portable equipment etc. with transient overvoltages less than Overvoltage Category III.
Click here for complete specifications on the Extech MN25

What's included with the Extech MN25

  • Extech MN25 MiniTec Digital MultiMeter

Ask a question about Extech MN25 MiniTec Digital MultiMeter

Customer Reviews for the Extech MN25

Extech MN25 Offers

Extech MN25 - MiniTec® Digital MultiMeters

MiniTec® Digital MultiMeters

Rugged pocket design with 8 to 11 Functions

Includes Relative zero, Data Hold and Range Hold

Features

  • 4000 counts on large LCD with full function indication
  • Measures AC/DC Voltage and Current, Resistance, Capacitance, Frequency and Temperature
  • Temperature measurements to 1400°F (760°C)
  • Duty Cycle, Continuity and Diode test
  • Autoranging with manual range override
  • 10A fuse protection
  • Overload protection and indication
  • Auto power off saves battery life
  • Includes protective rubber holster, general purpose bead wire Type K temperature probe (Model MN26T), two 1.5V AAA batteries and test leads

Extech MN25 Specifications

V DC V AC 600V DC/AC 200Vrms on 200mV range
Storage Humidity < 80%
mA DC 200mA 250V fast acting fuse
A DC A AC 10A 250V fast acting fuse(30 seconds max every 15 minutes)
Resistance Continuity 250Vrms for 15sec max
Display 3 1/2 digit 2000 count LCD 0.5" digits
Overrange indication "1" is displayed
Diode Test Test current of 1mA maximum open circuit voltage 2.8V DC typical
Continuity Check Audible signal will sound if the resistance is less than approximately 30 Ω
Battery Test current 9V (6mA); 1.5V (100mA)
Input Impedance >1M Ω
ACV Bandwidth 45Hz to 450Hz
DCA voltage drop 200mV
Polarity Automatic (no indication for positive polarity); Minus (-) sign for negative polarity.
Measurement Rate 2 times per second nominal
Low Battery Indication "BAT" is displayed if battery voltage drops below operating voltage
Battery 9 Volt Battery
Fuses mA μ A ranges; 0.2A/250V fast blow A range; 10A/250V fast blow
Operating Temperature 41°F to 104°F (5°C to 40°C)
Storage Temperature -4°F to 140°F (-20°C to 60°C)
Operating Humidity Max 80% up to 87°F (31°C) decreasing linearly to 50% at 104°F (40°C)
Operating Altitude 7000ft. (2000) meters maximum.
Weight 9.17 oz. (260g).
Size 4.78 x 2.38 x 1.57" (121.5 x 60.6 x 40mm)
Safety For indoor use and in accordance with Overvoltage Category II Pollution Degree 2. Category II includes local level appliance portable equipment etc. with transient overvoltages less than Overvoltage Category III.
Click here for complete specifications on the Extech MN25

What's included with the Extech MN25

  • Extech MN25 MiniTec Digital MultiMeter

Ask a question about Extech MN25 MiniTec Digital MultiMeter

Customer Reviews for the Extech MN25

More Extech Products