SC680 is a top-of-the-line True RMS Wireless Power Clamp Meter packed with all the essential features service technicians need to install, service, and troubleshoot any HVAC/R system. The SC680 meter also includes direct integration with the Job Link System App. It is ideal for obtaining electrical measurements on mini splits and includes Molex tips for hard-to-read circuitry. The low pass filter removes noise to get true voltage readings on variable frequency drives (VFDs) as well as tests three-phase power lines with two leads, and maintains a wireless connection directly to a mobile device at 1000 feet (305 meters). The clamp meter has a safety rating of CAT IV at 600 V and CAT III at 1000 V.
SC680 is a top-of-the-line True RMS Wireless Power Clamp Meter packed with all the essential features service technicians need to install, service, and troubleshoot any HVAC/R system. The SC680 meter also includes direct integration with the Job Link System App. It is ideal for obtaining electrical measurements on mini splits and includes Molex tips for hard-to-read circuitry. The low pass filter removes noise to get true voltage readings on variable frequency drives (VFDs) as well as tests three-phase power lines with two leads, and maintains a wireless connection directly to a mobile device at 1000 feet (305 meters). The clamp meter has a safety rating of CAT IV at 600 V and CAT III at 1000 V.
Fieldpiece SC680 Wireless AC DC Power Clamp Meter for HVAC/R Direct integration with Job Link System App The Fieldpiece SC680 is a top of the line TRMS Wireless Power Clamp Meter packed with all the essential features service technician need to install, service, and troubleshoot any HVAC/R system The SC680 meter also includes direct integration with the Job Link System App. The SC680 Fieldpiece is ideal for obtaining electrical measurements on mini splits and includes Molex tips for hard-to-read circuitry. The low pass filter removes noise to get true voltage readings on variable frequency drives (VFDs) as well as tests three-phase power lines with two leads, and maintains wireless connection directly to a mobile device at 1000 feet (305 meters). The clamp meter has a safety rating of CAT IV at 600 V and CAT III for 1000V. The Fieldpiece SC680 Wireless Power Clamp Meter is great for troubleshooting mini-split systems. It includes dual Type K temperature ports to measure entering/exiting air temperatures as well as measure frequency (Hz) directly with the clamp jaw. The included Molex tips are super thin to get readings on hard to reach circuitry to measure voltage and resistance. In addition, the SC680 measures DC Amps and Diode for mini-split inverts with a swivel clamp to view readings at any angle. The Fieldpiece SC680 is the essential clamp meter with wireless functionality for HVAC/R professionals. The clamp meter will help determine system efficiency by directly measuring power consumption (kW) of a system. A technician can then recommend cost saving actions to a customer once the information has been documented. You can take more accurate VAC and AAC readings on variable frequency drives with the True RMS sensing technology and measure the starting amp draw of a compressor with Inrush current mode. One of the most failure prone components in an HVAC/R system is the capacitor. The capacitance test allows a service technician to test questionable motor start and run capacitors to determine when a capacitor needs to be replaced. Hang your SC680 clamp meter to any metallic surface with the heavy-duty magnet and when the job is done the test leads are easily stored by twisting them around the clamp and snapping the probes in the back for convenient and tidy storage. You also have the ability to take measurements more safely with one hand using the single test lead holder. The SC680 600 AC DC swivel clamp meter provides additional lighting with its powerful LED built into the clamp jaw, a bright blue backlight on the display to easily see your measurements as well as a dial backlight to clearly view the dial in low light situations. The big dual backlit display makes it easy to see both voltage and amperage readings at the same time. One of the safety features on the Fieldpiece meter SC680 is the high voltage warning which includes a warning symbol on the display, an audible beep, and a red LED that lights up. A service technician can connect directly with the Job Link app to document all electrical measurements. The Fieldpiece multimeter SC680 can also be paired with the SM380V or SM480V manifolds, SRS3 wireless scale, and other Job Link Probes and accessory heads to receive and document a complete system snapshot in the app. What is
Features
The Fieldpiece SC680 Wireless Power Clamp Meter is great for troubleshooting mini-split systems. It includes dual Type K temperature ports to measure entering/exiting air temperatures as well as measure frequency (Hz) directly with the clamp jaw. The included Molex tips are super thin to get readings on hard to reach circuitry to measure voltage and resistance. In addition, the SC680 measures DC Amps and Diode for mini-split inverts with a swivel clamp to view readings at any angle.
The Fieldpiece SC680 is the essential clamp meter with wireless functionality for HVAC professionals. The clamp meter will help determine system efficiency by directly measuring power consumption (kW) of a system. A technician can then recommend cost saving actions to a customer once the information has been documented.
You can take more accurate VAC and AAC readings on variable frequency drives with the True RMS sensing technology and measure the starting amp draw of a compressor with Inrush current mode. One of the most failure prone components in an HVACR system is the capacitor. The capacitance test allows a service technician to test questionable motor start and run capacitors to determine when a capacitor needs to be replaced.
Hang your SC680 clamp meter to any metallic surface with the heavy-duty magnet and when the job is done the test leads are easily stored by twisting them around the clamp and snapping the probes in the back for convenient and tidy storage. You also have the ability to take measurements more safely with one hand using the single test lead holder.
The SC680 600 AC DC swivel clamp meter provides additional lighting with its powerful LED built into the clamp jaw, a bright blue backlight on the display to easily see your measurements as well as a dial backlight to clearly view the dial in low light situations. The big dual backlit display makes it easy to see both voltage and amperage readings at the same time.
One of the safety features on the Fieldpiece meter SC680 is the high voltage warning which includes a warning symbol on the display, an audible beep, and a red LED that lights up.
A service technician can connect directly with the Job Link app to document all electrical measurements. The Fieldpiece multimeter SC680 can also be paired with the SM380V or SM480V manifolds, SRS3 wireless scale, and other Job Link Probes and accessory heads to receive and document a complete system snapshot in the app.
Applications
| Display | 10000 count dual display |
| Backlight | 5 minute duration with auto-off, blue color |
| Overrange | “OL” or “-OL” is displayed |
| Measurement rate | 3.3 times per second, nominal |
| Zero | Automatic |
| Operating environment | 32 to 122°F (0 to 50°C) at <70%RH |
| Storage temperature | -4 to 140°F (-20 to 60°C), 0 to 80%RH (with battery removed) |
| Accuracy | Stated accuracy at 73°F ±9°F (23°C ±5°C), <75%RH |
| Temperature coefficient | 0.1 x (specified accuracy) per °C: 0 to 19°C (32 to 66°F), 28 to 50°C (82 to 122°F) |
| APO (Auto Power Off) | Approx. 30 minutes |
| Power | Single standard 9-volt battery, NEDA 1604, JIS 006P, IEC 6F22 |
| Battery life | 100 hours typical alkaline (No wireless, no backlight) |
| Low battery indication | Battery icon blinks and “batt” is displayed when the battery voltage drops below the operating level |
| Altitude | Up to 6562 ft (2000 m) |
| Overload protection | 1000VDC or 750VAC rms unless otherwise stated |
| Test leads | Use UL listed test leads that comply to UL61010-031 rated CATIV 600V, CATIII 1000V or above. Included test leads are gold-plated and have removable safety caps. |
| Dimensions | 11.87 x 3.13 x 1.97" (301.5 x 79.5 x 50.0 mm) |
| Weight | Approx. 480 g including battery |
Click on a category to view a selection of compatible accessories with the Fieldpiece SC680 Wireless AC DC Power Clamp Meter CAT IV 600V - CAT III 1000V for Mini-Split Systems.
| Display | 10000 count dual display |
| Backlight | 5 minute duration with auto-off, blue color |
| Overrange | “OL” or “-OL” is displayed |
| Measurement rate | 3.3 times per second, nominal |
| Zero | Automatic |
| Operating environment | 32 to 122°F (0 to 50°C) at <70%RH |
| Storage temperature | -4 to 140°F (-20 to 60°C), 0 to 80%RH (with battery removed) |
| Accuracy | Stated accuracy at 73°F ±9°F (23°C ±5°C), <75%RH |
| Temperature coefficient | 0.1 x (specified accuracy) per °C: 0 to 19°C (32 to 66°F), 28 to 50°C (82 to 122°F) |
| APO (Auto Power Off) | Approx. 30 minutes |
| Power | Single standard 9-volt battery, NEDA 1604, JIS 006P, IEC 6F22 |
| Battery life | 100 hours typical alkaline (No wireless, no backlight) |
| Low battery indication | Battery icon blinks and “batt” is displayed when the battery voltage drops below the operating level |
| Altitude | Up to 6562 ft (2000 m) |
| Overload protection | 1000VDC or 750VAC rms unless otherwise stated |
| Test leads | Use UL listed test leads that comply to UL61010-031 rated CATIV 600V, CATIII 1000V or above. Included test leads are gold-plated and have removable safety caps. |
| Dimensions | 11.87 x 3.13 x 1.97" (301.5 x 79.5 x 50.0 mm) |
| Weight | Approx. 480 g including battery |
Click on a category to view a selection of compatible accessories with the Fieldpiece SC680 Wireless AC DC Power Clamp Meter CAT IV 600V - CAT III 1000V for Mini-Split Systems.
