This 1" mechanical oval gear flowmeter features a durable aluminum body, a PPS rotor, an FKM viton o-ring, a 176°F (80°C) maximum temperature limit, a 150 ANSI flanged process connection, and a 4-digit mechanical totaliser, offering the ability to handle a wide range of fluid consistency. Pre-configured to display in litres.
This 1" mechanical oval gear flowmeter features a durable aluminum body, a PPS rotor, an FKM viton o-ring, a 176°F (80°C) maximum temperature limit, a 150 ANSI flanged process connection, and a 4-digit mechanical totaliser, offering the ability to handle a wide range of fluid consistency. Pre-configured to display in litres.
Volumetric flow measurement of clean liquids. Suitable for applications for safe area metering of fuel oils, lubricants, and other nonflammable viscous chemicals.
Features
Applications
| Nominal Size | 1" (25 mm) |
| Flow Range | 2.6-40 GPM (10-150 L/min) |
| Accuracy at 3cp | ±1% of reading for M registers |
| Repeatability | Typically ± 0.03% of reading |
| Ambient Temperature Range | 5°F to 176°F (-15°C to 80°C) |
| Maximum Pressure (Threaded) | 580 psi (40 bar) |
| M Register | 4 digit resettable & NEMA 4 (IP65) |
| V Register | n/a |
| Recommended Filtration | 100 mesh (150 μm) |
| Face-to-Face Dimension A - Threaded | 5.39" (137 mm) AL | 6.93" (176 mm) SS |
| Face-to-Face Dimension A - Flanged | 7.8" (198 mm) AL | 9.33" (237 mm) SS |
| Meter Base-to-Register Top - Dimension B | 7.4" (188 mm) AL | 8.43" (214 mm) SS |
| Meter Cap Width | 4.72" (120 mm) |
Click on a category to view a selection of compatible accessories with the FLOMEC OMA-025-F-M OM Mechanical Oval Gear Flowmeter with aluminum body, 1", 150 ANSI flange.
| Nominal Size | 1" (25 mm) |
| Flow Range | 2.6-40 GPM (10-150 L/min) |
| Accuracy at 3cp | ±1% of reading for M registers |
| Repeatability | Typically ± 0.03% of reading |
| Ambient Temperature Range | 5°F to 176°F (-15°C to 80°C) |
| Maximum Pressure (Threaded) | 580 psi (40 bar) |
| M Register | 4 digit resettable & NEMA 4 (IP65) |
| V Register | n/a |
| Recommended Filtration | 100 mesh (150 μm) |
| Face-to-Face Dimension A - Threaded | 5.39" (137 mm) AL | 6.93" (176 mm) SS |
| Face-to-Face Dimension A - Flanged | 7.8" (198 mm) AL | 9.33" (237 mm) SS |
| Meter Base-to-Register Top - Dimension B | 7.4" (188 mm) AL | 8.43" (214 mm) SS |
| Meter Cap Width | 4.72" (120 mm) |
Click on a category to view a selection of compatible accessories with the FLOMEC OMA-025-F-M OM Mechanical Oval Gear Flowmeter with aluminum body, 1", 150 ANSI flange.
