Designed to meet schedule 80 PVC specifications, this PVC water flow meter is a pulse out conditioned signal module with a cable. In addition, this meter features a 1/2" (12.7 mm) turbine, a spigot fitting type, and is factory calibrated for water like fluids.
Designed to meet schedule 80 PVC specifications, this PVC water flow meter is a pulse out conditioned signal module with a cable. In addition, this meter features a 1/2" (12.7 mm) turbine, a spigot fitting type, and is factory calibrated for water like fluids.
Features
Applications
| Fitting Type | Schedule 80 spigot (pipe) end |
| Turbine Size | ½" (12.7 mm) |
| Flow Range | 1 to 10 GPM (3.8 to 38 L/min) |
| Electronic Choice | Pulse out conditioned signal module with cable |
| Frequency Range | 0.25 Hz to 3 kHz |
| Calibration of Computer/Display | Gallons per minute (for use with Q9, P9, 42, X9, R9 electronics only) |
| Accuracy (% of Reading) | ±3% (accuracy can be improved with field calibration) |
| Pressure Rating | 225 psi (15.3 bar) at 73°F (23°C) |
| For CE Applications | 135 psi (9.1 bar) at 73°F (23°C) |
| Temperature Range | Operating: 32 to 140°F (0 to 60°C)- do not allow fluid to freeze inside meter* Storage: -40 to 140°F (-40 to 60°C) **PVC pressure rating will incrementally decrease above 73°F (23°C) |
| Typical K-Factor | 2500 PPG (660 pulses/L) |
| Sensor (Pickup) | Magnetic |
| External Power | Requires 5 to 26 VDC |
| Wetted Materials | Housing: PVC Bearings: 96% alumina ceramic Shaft: Tungsten carbide Rotor: PVDF Rings: 316 stainless steel |
| Recommended Strainer Size | ~120 mesh (125 microns) |
| Packaging | 05 thru 20 turbine with P9, 42, PO electronics |
| Dimensions | 4.3 x 2.5 x 2.1" (109 x 63 x 53 mm) |
| Weight | Approximately 0.9 lbs (0.4 kg) |
Click on a category to view a selection of compatible accessories with the FLOMEC TM Series PVC Water Flow Meter with ½" turbine, spigot, pulse out conditioned signal module with cable.
| Fitting Type | Schedule 80 spigot (pipe) end |
| Turbine Size | ½" (12.7 mm) |
| Flow Range | 1 to 10 GPM (3.8 to 38 L/min) |
| Electronic Choice | Pulse out conditioned signal module with cable |
| Frequency Range | 0.25 Hz to 3 kHz |
| Calibration of Computer/Display | Gallons per minute (for use with Q9, P9, 42, X9, R9 electronics only) |
| Accuracy (% of Reading) | ±3% (accuracy can be improved with field calibration) |
| Pressure Rating | 225 psi (15.3 bar) at 73°F (23°C) |
| For CE Applications | 135 psi (9.1 bar) at 73°F (23°C) |
| Temperature Range | Operating: 32 to 140°F (0 to 60°C)- do not allow fluid to freeze inside meter* Storage: -40 to 140°F (-40 to 60°C) **PVC pressure rating will incrementally decrease above 73°F (23°C) |
| Typical K-Factor | 2500 PPG (660 pulses/L) |
| Sensor (Pickup) | Magnetic |
| External Power | Requires 5 to 26 VDC |
| Wetted Materials | Housing: PVC Bearings: 96% alumina ceramic Shaft: Tungsten carbide Rotor: PVDF Rings: 316 stainless steel |
| Recommended Strainer Size | ~120 mesh (125 microns) |
| Packaging | 05 thru 20 turbine with P9, 42, PO electronics |
| Dimensions | 4.3 x 2.5 x 2.1" (109 x 63 x 53 mm) |
| Weight | Approximately 0.9 lbs (0.4 kg) |
Click on a category to view a selection of compatible accessories with the FLOMEC TM Series PVC Water Flow Meter with ½" turbine, spigot, pulse out conditioned signal module with cable.
