Test the impedance of electronic components with this analyzer. The meter is designed to detect impedance from 1 MHz to 1.3 GHz.
Test the impedance of electronic components with this analyzer. The meter is designed to detect impedance from 1 MHz to 1.3 GHz.
Whether you're testing electronic components, conducting R&D or producing ferrite chip beads and chip inductors, this Hioki IM7585-01 Impedance Analyzer is an ideal tool to have. The meter is built to measure an impedance range from 1 MHz to 1.3 GHz with a speed of 0.5 ms.
Features
| Measurement | |
| Range | 100 mΩ to 5 kΩ |
| Modes | LCR, Analyzer, Continuous measurement |
| Parameters | Z, Y, θ, Rs (ESR), Rp, X, G, B, Cs, Cp, Ls, Lp, D (tanδ), Q |
| Frequency | 1 MHz to 1.3 GHz (100 kHz setting resolution) |
| Signal Level | Power: -40 to 1 dBm Voltage: 4 to 502 mV RMS Current: 0.09 to 10.04 mA RMS |
| Speeds | 0.5 ms |
| General Specifications | |
| Output Impedance | 50 Ω (at 10 MHz) |
| Display | 8.4" (21.34 cm) TFT touch screen |
| Interfaces | EXT I/O (handler), USB communication, USB memory, LAN |
| Power Supply | 100 to 240 VAC, 50/60 Hz, 70 VA maximum |
| Dimensions | Main Unit: 13.7 x 8.46 x 7.87" (348 x 215 x 200 mm) Test Head: 0.94 x 3.54 x 2.52" (24 x 90 x 64 mm) |
| Weight | Main Unit: 282.2 oz (8 kg) Test Head: 10.58 oz (300 g) |
| Manufacturer Warranty | 3 years |
| Measurement | |
| Range | 100 mΩ to 5 kΩ |
| Modes | LCR, Analyzer, Continuous measurement |
| Parameters | Z, Y, θ, Rs (ESR), Rp, X, G, B, Cs, Cp, Ls, Lp, D (tanδ), Q |
| Frequency | 1 MHz to 1.3 GHz (100 kHz setting resolution) |
| Signal Level | Power: -40 to 1 dBm Voltage: 4 to 502 mV RMS Current: 0.09 to 10.04 mA RMS |
| Speeds | 0.5 ms |
| General Specifications | |
| Output Impedance | 50 Ω (at 10 MHz) |
| Display | 8.4" (21.34 cm) TFT touch screen |
| Interfaces | EXT I/O (handler), USB communication, USB memory, LAN |
| Power Supply | 100 to 240 VAC, 50/60 Hz, 70 VA maximum |
| Dimensions | Main Unit: 13.7 x 8.46 x 7.87" (348 x 215 x 200 mm) Test Head: 0.94 x 3.54 x 2.52" (24 x 90 x 64 mm) |
| Weight | Main Unit: 282.2 oz (8 kg) Test Head: 10.58 oz (300 g) |
| Manufacturer Warranty | 3 years |
