Measures resistance between 0.1 µohms and 999.9 mO, at high currents. Can provide test currents from 10 amps up to 600 amps subject to the load resistance and supply voltage. A large liquid crystal display provides all the information needed to perform a test; all test parameters and measurement results are displayed.
Measures resistance between 0.1 µohms and 999.9 mO, at high currents. Can provide test currents from 10 amps up to 600 amps subject to the load resistance and supply voltage. A large liquid crystal display provides all the information needed to perform a test; all test parameters and measurement results are displayed.
Discontinued!
This product has been discontinued and is no longer available. There are no replacement options.
We can help you find what you need:
Features
Applications
Operates in One of Three Modes
Continuous mode is provided for users who wish to monitor a resistance over a period of time. Connect the test leads, select the test current and press the TEST button. The DLR600 will pass a current continuously, and measure the resulting voltage at 2-second intervals, until the test button is pressed to stop the test or the test circuit is interrupted.
In Normal mode you connect the leads, select the test current and press the TEST button. The test current will ramp up to the desired level, hold for 2 seconds and then ramp down. The whole process takes approximately 7 seconds.
In Auto mode select the desired current, connect the current leads and press the TEST button. The TEST lamp will flash to show that the DLRO600 is ready to carry out a test. As soon as the potential leads are connected, a test will start. To repeat a test, simply break contact with the voltage probes and remake contact.
| Measurement range | 0.1 µΩ to 999.9 mΩ |
| Accuracy | Voltage: ±0.5% ± 0.1 mV, Current: ±0.5% ± 0.1 A, Resistance: Better than 1% from 100 µΩ to 100 mΩ |
| Maximum continuous test time | More than 60 seconds at 600 A @ 20℃ ambient |
| Full output | 207 to 265 V 50/60 Hz with a load less than 7 mΩ including current leads |
| Reduced output | : Down to 100 V 50/60 Hz |
| Test modes | Manual, Auto, Continuous |
| Test time | 7 seconds Normal / Auto mode |
| Display | Large, high resolution backlit liquid crystal display |
| Warnings | Current flowing: - LED. Other warnings are shown on the lcd display |
| Data Transfer | Real time or batch download via RS232 using Download Manager |
| Storage Capacity | 300 result sets and memo, battery backed for 10 years |
| Memo field | 200 characters max. |
| Test current range | 10 A to 600 A d.c. in 1 A steps |
| Accuracy | ±2% ±2 A |
| Voltmeter input impedance | >200 kΩ |
| Hum rejections | 5 V rms 50 Hz/60 Hz |
| Temperature operation | -10 to +50ºC |
| Safety | IEC61010-1 |
| Dimensions | 410 x 250 x 270 mm |
| Weight | 14.5 kg (excluding test leads) |
Click on a category to view a selection of compatible accessories with the Megger DLRO600-NLS High Current Digital Low Resistance Ohmmeter, No Test Leads.
| Measurement range | 0.1 µΩ to 999.9 mΩ |
| Accuracy | Voltage: ±0.5% ± 0.1 mV, Current: ±0.5% ± 0.1 A, Resistance: Better than 1% from 100 µΩ to 100 mΩ |
| Maximum continuous test time | More than 60 seconds at 600 A @ 20℃ ambient |
| Full output | 207 to 265 V 50/60 Hz with a load less than 7 mΩ including current leads |
| Reduced output | : Down to 100 V 50/60 Hz |
| Test modes | Manual, Auto, Continuous |
| Test time | 7 seconds Normal / Auto mode |
| Display | Large, high resolution backlit liquid crystal display |
| Warnings | Current flowing: - LED. Other warnings are shown on the lcd display |
| Data Transfer | Real time or batch download via RS232 using Download Manager |
| Storage Capacity | 300 result sets and memo, battery backed for 10 years |
| Memo field | 200 characters max. |
| Test current range | 10 A to 600 A d.c. in 1 A steps |
| Accuracy | ±2% ±2 A |
| Voltmeter input impedance | >200 kΩ |
| Hum rejections | 5 V rms 50 Hz/60 Hz |
| Temperature operation | -10 to +50ºC |
| Safety | IEC61010-1 |
| Dimensions | 410 x 250 x 270 mm |
| Weight | 14.5 kg (excluding test leads) |
Click on a category to view a selection of compatible accessories with the Megger DLRO600-NLS High Current Digital Low Resistance Ohmmeter, No Test Leads.
