The stabilized insulation test voltage is accurate to +2% -0%. This compares to the industry standard +20%, providing a more accurate test voltage without risking over-voltage damage to circuits or components. The output voltage is consistant between 0 and 2% throughout the test range.
The stabilized insulation test voltage is accurate to +2% -0%. This compares to the industry standard +20%, providing a more accurate test voltage without risking over-voltage damage to circuits or components. The output voltage is consistant between 0 and 2% throughout the test range.
Where a non-standard test voltage is required, a variable range allows the exact test voltage to be selected from 10 up to 1000 V. and is subject to the same stabilized output control.
Features
Applications
| Insulation | |
| Test voltage | 250 V, 500 V, 1000 V |
| Display range | Analogue: 1 GΩ full scale |
| Resolution | 0.1 kΩ |
| Short Circuit/Charge Current | 2 mA +0% -50% to EN 61557-2 (2007) |
| Open Circuit Voltage Insulation | -0% +2% ±2 V |
| Test Current | 1 mA at minimum pass value of insulation to a maximum of 2 mA maximum |
| Leakage | 10% ±3 digits |
| Voltage | 3% ±3 digits ±0.5% of rated voltage |
| Timer Control | 60 seconds countdown timer |
| Continuity | |
| Continuity Measurement | 0.01 Ω to 999 kΩ (0 to 1000 kΩ on analogue scale) |
| Open Circuit Voltage | 5 V ± 1 V |
| Test Current | 200 mA (–0 mA +20 mA), (0.01 to 4 Ω) |
| Polarity | Single polarity (Default)/Dual polarity (configurable on setup) |
| Lead Resistance | Null up to 9.00 Ω |
| Voltage | |
| Voltage Range | AC: 10 mV to 600 V TRMS sinusoidal (15 Hz to 400 Hz) DC: 0 to 600 V |
| Frequency | |
| Frequency Measurement Range | 15 to 400 Hz |
| Frequency Measurement Accuracy | ±0.5% ± 1 digit (100 to 400 Hz unspecified) |
| General Specifications | |
| Data Download | Bluetooth wireless, Bluetooth Class II |
| Power Supply | 6 x 1.5 V cells type IEC LR6 (AA, MN1500, HP7, AM3 R6HP) Alkaline 6 x 1.2 V NiMH rechargeable cells may be used |
| Battery Life | 3000 insulation tests with duty cycle of 5 seconds ON/55 seconds OFF at 1000 V into 1 MΩ |
| Dimensions | 9 x 4.25 x 2.32" (228 x 108 x 63 mm) |
| Weight | 1.32 lbs (600 g) |
Click on a category to view a selection of compatible accessories with the Megger MIT400/2 CAT IV Insulation Tester, 250/500/1000 V.
| Insulation | |
| Test voltage | 250 V, 500 V, 1000 V |
| Display range | Analogue: 1 GΩ full scale |
| Resolution | 0.1 kΩ |
| Short Circuit/Charge Current | 2 mA +0% -50% to EN 61557-2 (2007) |
| Open Circuit Voltage Insulation | -0% +2% ±2 V |
| Test Current | 1 mA at minimum pass value of insulation to a maximum of 2 mA maximum |
| Leakage | 10% ±3 digits |
| Voltage | 3% ±3 digits ±0.5% of rated voltage |
| Timer Control | 60 seconds countdown timer |
| Continuity | |
| Continuity Measurement | 0.01 Ω to 999 kΩ (0 to 1000 kΩ on analogue scale) |
| Open Circuit Voltage | 5 V ± 1 V |
| Test Current | 200 mA (–0 mA +20 mA), (0.01 to 4 Ω) |
| Polarity | Single polarity (Default)/Dual polarity (configurable on setup) |
| Lead Resistance | Null up to 9.00 Ω |
| Voltage | |
| Voltage Range | AC: 10 mV to 600 V TRMS sinusoidal (15 Hz to 400 Hz) DC: 0 to 600 V |
| Frequency | |
| Frequency Measurement Range | 15 to 400 Hz |
| Frequency Measurement Accuracy | ±0.5% ± 1 digit (100 to 400 Hz unspecified) |
| General Specifications | |
| Data Download | Bluetooth wireless, Bluetooth Class II |
| Power Supply | 6 x 1.5 V cells type IEC LR6 (AA, MN1500, HP7, AM3 R6HP) Alkaline 6 x 1.2 V NiMH rechargeable cells may be used |
| Battery Life | 3000 insulation tests with duty cycle of 5 seconds ON/55 seconds OFF at 1000 V into 1 MΩ |
| Dimensions | 9 x 4.25 x 2.32" (228 x 108 x 63 mm) |
| Weight | 1.32 lbs (600 g) |
Click on a category to view a selection of compatible accessories with the Megger MIT400/2 CAT IV Insulation Tester, 250/500/1000 V.
