Leaders in Metrology

FREE SHIPPING ON ONLINE ORDERS OVER $99*

Leaders in Metrology

Mitutoyo 519-522 MLH-522 Mu-Checker Pivot Bearing Lever Head Probe, 0.02N Force

Model: MLH-522 | Order No: 519-522

Mitutoyo 519-522 MLH-522 Mu-Checker Pivot Bearing Lever Head Probe, 0.02N Force-

Downloads:

More Mitutoyo Products

Ask an Expert

Mitutoyo 519-522 MLH-522 Mu-Checker Pivot Bearing Lever Head Probe, 0.02N Force

Model: MLH-522 | Order No: 519-522

Lever head probe for the Mitutoyo MU-Checker with a low measuring force. This probe type allows for multipoint measurements of small parts, flatness, and straightness measurements on an X/Y table, etc. and runout measurement of shafts.

Lever head probe for the Mitutoyo MU-Checker with a low measuring force. This probe type allows for multipoint measurements of small parts, flatness, and straightness measurements on an X/Y table, etc. and runout measurement of shafts.

Your Price $1790.00 USD
Availability 1 in Stock
Quantity

Recommended Accessories

Mitutoyo 519-109-10 Transfer Stand with Hardened Steel Serrated Anvil-

Mitutoyo 519-109-10 Transfer Stand with Hardened Steel Serrated Anvil

519-109-10

Mitutoyo 900211 Holder Arm B, Round, Ø8 x 115mm-

Mitutoyo 900211 Holder Arm B, Round, Ø8 x 115mm

900211

Mitutoyo 902053 Swivel Clamp for Holding Bar (Metric), Ø6mm stem, Ø8mm stem, and dovetail-

Mitutoyo 902053 Swivel Clamp for Holding Bar (Metric), Ø6mm stem, Ø8mm stem, and dovetail

902053

Mitutoyo 21CZB128 Lever Head Mounting Bracket with Ø6 Dovetail-Grooved Stem-

Mitutoyo 21CZB128 Lever Head Mounting Bracket with Ø6 Dovetail-Grooved Stem

21CZB128

Mitutoyo 21CZB131 Lever Head Mounting Bracket with ø4 Dovetail-Grooved Stem-

Mitutoyo 21CZB131 Lever Head Mounting Bracket with ø4 Dovetail-Grooved Stem

21CZB131

Mitutoyo 900306 Holder Arm, 6.25 x 12.7 x 100mm-

Mitutoyo 900306 Holder Arm, 6.25 x 12.7 x 100mm

900306

Mitutoyo MLH-522 Offers

A low-measuring-force sensor enables even a soft workpiece to be measured without significant deformation.

Features

  • Bearing unit structure: Pivot bearing type
  • Measuring Force: Approx. 0.02N

Mitutoyo MLH-522 Specifications

Range ±0.5
Stroke ±0.6mm
Remarks Pivot bearing low measuring force type
Linearity ±0.3%
Measuring Force 0.02N
Mass 112g
Scale Linear Voltage differential transformer (half bridge)
Calibration Frequency 5 kHz
Calibration Voltage 3 V rms (sine wave)
Connector DIN 5pin
Functions Type
Click here for complete specifications on the Mitutoyo MLH-522

What's included with the Mitutoyo MLH-522

  • 2m Cable
  • carbide-tipped stylus ⌀ 1 mm (520940), stylus ⌀ 2 mm (520939), stylus ⌀ 3 mm (520938)

Click on a category to view a selection of compatible accessories with the Mitutoyo 519-522 MLH-522 Mu-Checker Pivot Bearing Lever Head Probe, 0.02N Force.

Mitutoyo 519-109-10 Transfer Stand with Hardened Steel Serrated Anvil 519-109-10
Designed for comparison measurements of height using a dial indicator or Digimatic Indicator. Fine-adjustment of 1mm is provided for zero-setting of the indicator.



Mitutoyo 953639 Holder Arm, 6.25 x 12.7 x 50mm 953639
This holding bar for swivel clamps has a length of 50mm. For use with Mitutoyo 519-327, 519-521, 519-522, and 519-326 Lever Head Probes.



Mitutoyo 900211 Holder Arm B, Round, Ø8 x 115mm 900211
This holding bar for swivel clamps has a length of 115mm. For use with Mitutoyo 519-327, 519-521, 519-522, and 519-326 Lever Head Probes.



Mitutoyo 900209 Holder Arm A, Square, 9 x 9 x 100mm 900209
This holding bar for swivel clamps has a length of 100mm. For use with Mitutoyo 519-327, 519-521, 519-522, and 519-326 Lever Head Probes.



Mitutoyo 900320 Clamp for Ø6/Ø9.5 Dovetail-Grooved Stems 900320
This swivel clamp is for use with a holding bar. For use with Mitutoyo 519-327, 519-521, 519-522, and 519-326 Lever Head Probes.



Mitutoyo 902053 Swivel Clamp for Holding Bar (Metric), Ø6mm stem, Ø8mm stem, and dovetail 902053
This swivel clamp is for use with a holding bar. For Ø6mm stem, Ø8mm stem, and dovetail.



Mitutoyo 21CZB128 Lever Head Mounting Bracket with Ø6 Dovetail-Grooved Stem 21CZB128
For use with Mitutoyo 519-327, 519-521, 519-522, and 519-326 Lever Head Probes.



Mitutoyo 21CZB131 Lever Head Mounting Bracket with ø4 Dovetail-Grooved Stem 21CZB131
For use with Mitutoyo 519-327, 519-521, 519-522, and 519-326 Lever Head Probes.



Mitutoyo 900306 Holder Arm, 6.25 x 12.7 x 100mm 900306
This holding bar for swivel clamps has a length of 100mm. For use with Mitutoyo 519-327, 519-521, 519-522, and 519-326 Lever Head Probes.



Ask a question about Mitutoyo 519-522 MLH-522 Mu-Checker Pivot Bearing Lever Head Probe, 0.02N Force

Customer Reviews for the Mitutoyo MLH-522

Mitutoyo MLH-522 Offers

A low-measuring-force sensor enables even a soft workpiece to be measured without significant deformation.

Features

  • Bearing unit structure: Pivot bearing type
  • Measuring Force: Approx. 0.02N
Show More...

Mitutoyo MLH-522 Specifications

Range ±0.5
Stroke ±0.6mm
Remarks Pivot bearing low measuring force type
Linearity ±0.3%
Measuring Force 0.02N
Mass 112g
Scale Linear Voltage differential transformer (half bridge)
Calibration Frequency 5 kHz
Calibration Voltage 3 V rms (sine wave)
Connector DIN 5pin
Functions Type
Click here for complete specifications on the Mitutoyo MLH-522

What's included with the Mitutoyo MLH-522

  • 2m Cable
  • carbide-tipped stylus ⌀ 1 mm (520940), stylus ⌀ 2 mm (520939), stylus ⌀ 3 mm (520938)

Click on a category to view a selection of compatible accessories with the Mitutoyo 519-522 MLH-522 Mu-Checker Pivot Bearing Lever Head Probe, 0.02N Force.

Mitutoyo 519-109-10 Transfer Stand with Hardened Steel Serrated Anvil 519-109-10
Designed for comparison measurements of height using a dial indicator or Digimatic Indicator. Fine-adjustment of 1mm is provided for zero-setting of the indicator.



Mitutoyo 953639 Holder Arm, 6.25 x 12.7 x 50mm 953639
This holding bar for swivel clamps has a length of 50mm. For use with Mitutoyo 519-327, 519-521, 519-522, and 519-326 Lever Head Probes.



Mitutoyo 900211 Holder Arm B, Round, Ø8 x 115mm 900211
This holding bar for swivel clamps has a length of 115mm. For use with Mitutoyo 519-327, 519-521, 519-522, and 519-326 Lever Head Probes.



Mitutoyo 900209 Holder Arm A, Square, 9 x 9 x 100mm 900209
This holding bar for swivel clamps has a length of 100mm. For use with Mitutoyo 519-327, 519-521, 519-522, and 519-326 Lever Head Probes.



Mitutoyo 900320 Clamp for Ø6/Ø9.5 Dovetail-Grooved Stems 900320
This swivel clamp is for use with a holding bar. For use with Mitutoyo 519-327, 519-521, 519-522, and 519-326 Lever Head Probes.



Mitutoyo 902053 Swivel Clamp for Holding Bar (Metric), Ø6mm stem, Ø8mm stem, and dovetail 902053
This swivel clamp is for use with a holding bar. For Ø6mm stem, Ø8mm stem, and dovetail.



Mitutoyo 21CZB128 Lever Head Mounting Bracket with Ø6 Dovetail-Grooved Stem 21CZB128
For use with Mitutoyo 519-327, 519-521, 519-522, and 519-326 Lever Head Probes.



Mitutoyo 21CZB131 Lever Head Mounting Bracket with ø4 Dovetail-Grooved Stem 21CZB131
For use with Mitutoyo 519-327, 519-521, 519-522, and 519-326 Lever Head Probes.



Mitutoyo 900306 Holder Arm, 6.25 x 12.7 x 100mm 900306
This holding bar for swivel clamps has a length of 100mm. For use with Mitutoyo 519-327, 519-521, 519-522, and 519-326 Lever Head Probes.



Ask a question about Mitutoyo 519-522 MLH-522 Mu-Checker Pivot Bearing Lever Head Probe, 0.02N Force

Customer Reviews for the Mitutoyo MLH-522

More Mitutoyo Products


  • We accept these payment methods:
  • Visa, Master Card, Discover, American Express & PayPal