Features a small external diameter with 0.63", the hydrostatic level transmitter is made of 316L stainless steel. It is designed for measuring levels in and down water wells. It is an accurate 2-wire transmitter with a piezoresistive measuring system with direct air pressure and temperature compensation and built-in surge protection.
Features a small external diameter with 0.63", the hydrostatic level transmitter is made of 316L stainless steel. It is designed for measuring levels in and down water wells. It is an accurate 2-wire transmitter with a piezoresistive measuring system with direct air pressure and temperature compensation and built-in surge protection.
| Nominal Measuring Range (ft. WG) | 0 to 100' |
| Measuring Principle | Piezo-resistive (relative pressure) |
| Min. Programmable Range | 30' |
| Max. Programmable Range | 100' |
| Non-Standard Range | Min. 0 to 30'/Max. 0 to 900' |
| Max. Overpressure | 4.8 bar/70 psi |
| Temperature Range | -5 to 175°F |
| Temperature Deviation, Zero Point | Better than ± 0.01 %/°F |
| Temperature Deviation, Full Range | Better than ± 0.01 %/°F |
| Linearity/Stability | Better than ± 0.5 % FS/± 0.1 % FS |
| Measurement Accuracy | Better than ± 0.25 % FS @ 50 to 85°F |
| Long Time Stability | Better than ± 0.5 % FS per year |
| Materials | Stainless Steel 316L/Viton/PE |
| Supply Voltage | 10 to 30 V DC |
| Output Signal | 2-wire 4 to 20 mA (passive transmitter)/RS485 |
| Surge Protection | Supply and RS485: 200A @ 8/20 µs Gnd/case: 2000A @ 8/20 µs |
| Cable | 5 x AWG 23, shielded, PE insulation |
| Cable length | 115' |
| Enclosure | NEMA 6P, withstands a static pressure equal to max. overpressure |
| Weight (Without Cable) | 0.45 lbs |
| Approvals | CE Conformity EN61000-6-1 to -6-4 |
