This air duct heater provides 600 W at 120 V. It has a 150 W/in2 watt density and a maximum temperature of 600°F (315°C). It suits air and gas process heating and baking and drying.
This air duct heater provides 600 W at 120 V. It has a 150 W/in2 watt density and a maximum temperature of 600°F (315°C). It suits air and gas process heating and baking and drying.
The AHF series maximum flow air heaters are used with blowers or recirculating air in baking, drying, and preheating applications. The nickel-chrome heating element is insulated with ceramic beads.
Features
Applications
| Series | AHF Series |
| Type | Air Duct Heater |
| Voltage | 120 V |
| Power | 600 W |
| Watt density | 150 W/in2 |
| Phase | 1-phase |
| Maximum temperature | 600°F (315°C) |
| Termination | Flange Mount |
| Mounting | 4" (10.2 cm) OD flange |
| Air flow | up to 200 CFM |
| Maximum exit air temperature | 600°F (315°C) |
| Exit Air Temperatures | up to 600°F (315°C) |
| Maximum Amperage | 15 |
| Threaded Terminals | 11841 |
| Heating Element | Nickel-Chrome heating element insulated with ceramic beads on a stainless steel support frame; cross frame heating element for minimum resistance to air flow |
| Tube | 2 3/8" (60 mm) OD aluminum tube |
| Cross Sectional Flow Area | 3.5 square inches |
| Mounting Flange | 4" (102 mm) OD flange with three 9/32" (7 mm) diameter holes equally spaced on 3.25 BC, pre-drilled at inlet side |
| Optional construction | Stainless steel construction also available (consult Engineering) |
| Series | AHF Series |
| Type | Air Duct Heater |
| Voltage | 120 V |
| Power | 600 W |
| Watt density | 150 W/in2 |
| Phase | 1-phase |
| Maximum temperature | 600°F (315°C) |
| Termination | Flange Mount |
| Mounting | 4" (10.2 cm) OD flange |
| Air flow | up to 200 CFM |
| Maximum exit air temperature | 600°F (315°C) |
| Exit Air Temperatures | up to 600°F (315°C) |
| Maximum Amperage | 15 |
| Threaded Terminals | 11841 |
| Heating Element | Nickel-Chrome heating element insulated with ceramic beads on a stainless steel support frame; cross frame heating element for minimum resistance to air flow |
| Tube | 2 3/8" (60 mm) OD aluminum tube |
| Cross Sectional Flow Area | 3.5 square inches |
| Mounting Flange | 4" (102 mm) OD flange with three 9/32" (7 mm) diameter holes equally spaced on 3.25 BC, pre-drilled at inlet side |
| Optional construction | Stainless steel construction also available (consult Engineering) |
