Made for preheating applications, this air duct heater provides 1500 W at 240 V. It has a 150 W/in2 watt density and a maximum temperature of 600°F (315°C). It is used for laminating.
Made for preheating applications, this air duct heater provides 1500 W at 240 V. It has a 150 W/in2 watt density and a maximum temperature of 600°F (315°C). It is used for laminating.
The AHF series maximum flow air heaters are used with blowers or recirculating air in baking, drying, and preheating applications. The nickel-chrome heating element is insulated with ceramic beads.
Features
Applications
| Series | AHF Series |
| Type | Air Duct Heater |
| Voltage | 240 V |
| Power | 1500 W |
| Watt density | 150 W/in2 |
| Phase | 1-phase |
| Maximum temperature | 600°F (315°C) |
| Termination | Flange Mount |
| Mounting | 4" (10.2 cm) OD flange |
| Air flow | up to 200 CFM |
| Maximum exit air temperature | 600°F (315°C) |
| Exit Air Temperatures | up to 600°F (315°C) |
| Maximum Amperage | 15 |
| Threaded Terminals | 11841 |
| Heating Element | Nickel-Chrome heating element insulated with ceramic beads on a stainless steel support frame; cross frame heating element for minimum resistance to air flow |
| Tube | 2 3/8" (60 mm) OD aluminum tube |
| Cross Sectional Flow Area | 3.5 square inches |
| Mounting Flange | 4" (102 mm) OD flange with three 9/32" (7 mm) diameter holes equally spaced on 3.25 BC, pre-drilled at inlet side |
| Optional construction | Stainless steel construction also available (consult Engineering) |
| Series | AHF Series |
| Type | Air Duct Heater |
| Voltage | 240 V |
| Power | 1500 W |
| Watt density | 150 W/in2 |
| Phase | 1-phase |
| Maximum temperature | 600°F (315°C) |
| Termination | Flange Mount |
| Mounting | 4" (10.2 cm) OD flange |
| Air flow | up to 200 CFM |
| Maximum exit air temperature | 600°F (315°C) |
| Exit Air Temperatures | up to 600°F (315°C) |
| Maximum Amperage | 15 |
| Threaded Terminals | 11841 |
| Heating Element | Nickel-Chrome heating element insulated with ceramic beads on a stainless steel support frame; cross frame heating element for minimum resistance to air flow |
| Tube | 2 3/8" (60 mm) OD aluminum tube |
| Cross Sectional Flow Area | 3.5 square inches |
| Mounting Flange | 4" (102 mm) OD flange with three 9/32" (7 mm) diameter holes equally spaced on 3.25 BC, pre-drilled at inlet side |
| Optional construction | Stainless steel construction also available (consult Engineering) |
