Designed for connecting a smart probe to a host computer, this single-channel interface presents the probe to the PC over a USB serial link. It reads one smart probe through a 2 m (6.6 ft) attached cable and carries an IP67 NEMA-rated housing. Great for benchtop sensor readout, configuration, and logging on a connected PC.
Designed for connecting a smart probe to a host computer, this single-channel interface presents the probe to the PC over a USB serial link. It reads one smart probe through a 2 m (6.6 ft) attached cable and carries an IP67 NEMA-rated housing. Great for benchtop sensor readout, configuration, and logging on a connected PC.
The Omega Link IF-001 Smart Interface cable provides an easy way to configure and monitor Omega Smart Probes. The USB 2.0 compliant device appears as a serial port and is compatible with Windows 10 OS or higher.
The IF-001 can connect directly to an Omega Link Gateway to integrate Smart Probes into an Omega Link ecosystem. It also provides a Modbus RTU or Modbus ASCII interface to the entire smart sensor register set.
An integrated command line interface allows for quick smart sensor register configuration and monitoring using standard terminal emulators.
Features
Applications
| Interface | USB 2.0 |
| Power | USB powered; supplies up to 100 mA to sensor |
| Setup | Supports USB PnP setup and SYNC configuration software |
| Compatibility | Windows 10 OS or higher; compatible with OEG, SYNC configuration software, Omega Link Cloud, and Modbus Networks |
| Agency approvals | CE, WEEE |
| Environmental rating | NEMA 6 IP67 when mated (M12 end only) |
| Operating temperature | -4 to 176°F (-20 to 80°C), non-condensing |
| Vibration | 10 Gs at 10 Hz to 500 Hz (M12 end only) |
| Dimensions | Cable length: 78.7" (2 m) |
Click on a category to view a selection of compatible accessories with the Omega IF-001 Smart-Probe Interface, USB, Serial.
| Interface | USB 2.0 |
| Power | USB powered; supplies up to 100 mA to sensor |
| Setup | Supports USB PnP setup and SYNC configuration software |
| Compatibility | Windows 10 OS or higher; compatible with OEG, SYNC configuration software, Omega Link Cloud, and Modbus Networks |
| Agency approvals | CE, WEEE |
| Environmental rating | NEMA 6 IP67 when mated (M12 end only) |
| Operating temperature | -4 to 176°F (-20 to 80°C), non-condensing |
| Vibration | 10 Gs at 10 Hz to 500 Hz (M12 end only) |
| Dimensions | Cable length: 78.7" (2 m) |
Click on a category to view a selection of compatible accessories with the Omega IF-001 Smart-Probe Interface, USB, Serial.